/* $Id$ */
/*
* Copyright (c) 2009, 2010, 2011 Kristaps Dzonsons <kristaps@bsd.lv>
* Copyright (c) 2011, 2014, 2015, 2017 Ingo Schwarze <schwarze@openbsd.org>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "config.h"
#include <sys/types.h>
#include <assert.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include "mandoc_aux.h"
#include "mandoc.h"
#include "out.h"
static void tblcalc_data(struct rofftbl *, struct roffcol *,
const struct tbl_opts *, const struct tbl_dat *);
static void tblcalc_literal(struct rofftbl *, struct roffcol *,
const struct tbl_dat *);
static void tblcalc_number(struct rofftbl *, struct roffcol *,
const struct tbl_opts *, const struct tbl_dat *);
/*
* Parse the *src string and store a scaling unit into *dst.
* If the string doesn't specify the unit, use the default.
* If no default is specified, fail.
* Return 2 on complete success, 1 when a conversion was done,
* but there was trailing garbage, and 0 on total failure.
*/
int
a2roffsu(const char *src, struct roffsu *dst, enum roffscale def)
{
char *endptr;
dst->unit = def == SCALE_MAX ? SCALE_BU : def;
dst->scale = strtod(src, &endptr);
if (endptr == src)
return 0;
switch (*endptr++) {
case 'c':
dst->unit = SCALE_CM;
break;
case 'i':
dst->unit = SCALE_IN;
break;
case 'f':
dst->unit = SCALE_FS;
break;
case 'M':
dst->unit = SCALE_MM;
break;
case 'm':
dst->unit = SCALE_EM;
break;
case 'n':
dst->unit = SCALE_EN;
break;
case 'P':
dst->unit = SCALE_PC;
break;
case 'p':
dst->unit = SCALE_PT;
break;
case 'u':
dst->unit = SCALE_BU;
break;
case 'v':
dst->unit = SCALE_VS;
break;
case '\0':
endptr--;
/* FALLTHROUGH */
default:
if (SCALE_MAX == def)
return 0;
dst->unit = def;
break;
}
return *endptr == '\0' ? 2 : 1;
}
/*
* Calculate the abstract widths and decimal positions of columns in a
* table. This routine allocates the columns structures then runs over
* all rows and cells in the table. The function pointers in "tbl" are
* used for the actual width calculations.
*/
void
tblcalc(struct rofftbl *tbl, const struct tbl_span *sp,
size_t totalwidth)
{
const struct tbl_opts *opts;
const struct tbl_dat *dp;
struct roffcol *col;
size_t ewidth, xwidth;
int spans;
int icol, maxcol, necol, nxcol, quirkcol;
/*
* Allocate the master column specifiers. These will hold the
* widths and decimal positions for all cells in the column. It
* must be freed and nullified by the caller.
*/
assert(NULL == tbl->cols);
tbl->cols = mandoc_calloc((size_t)sp->opts->cols,
sizeof(struct roffcol));
opts = sp->opts;
for (maxcol = -1; sp; sp = sp->next) {
if (TBL_SPAN_DATA != sp->pos)
continue;
spans = 1;
/*
* Account for the data cells in the layout, matching it
* to data cells in the data section.
*/
for (dp = sp->first; dp; dp = dp->next) {
/* Do not used spanned cells in the calculation. */
if (0 < --spans)
continue;
spans = dp->spans;
if (1 < spans)
continue;
icol = dp->layout->col;
if (maxcol < icol)
maxcol = icol;
col = tbl->cols + icol;
col->flags |= dp->layout->flags;
if (dp->layout->flags & TBL_CELL_WIGN)
continue;
tblcalc_data(tbl, col, opts, dp);
}
}
/*
* Count columns to equalize and columns to maximize.
* Find maximum width of the columns to equalize.
* Find total width of the columns *not* to maximize.
*/
necol = nxcol = 0;
ewidth = xwidth = 0;
for (icol = 0; icol <= maxcol; icol++) {
col = tbl->cols + icol;
if (col->flags & TBL_CELL_EQUAL) {
necol++;
if (ewidth < col->width)
ewidth = col->width;
}
if (col->flags & TBL_CELL_WMAX)
nxcol++;
else
xwidth += col->width;
}
/*
* Equalize columns, if requested for any of them.
* Update total width of the columns not to maximize.
*/
if (necol) {
for (icol = 0; icol <= maxcol; icol++) {
col = tbl->cols + icol;
if ( ! (col->flags & TBL_CELL_EQUAL))
continue;
if (col->width == ewidth)
continue;
if (nxcol && totalwidth)
xwidth += ewidth - col->width;
col->width = ewidth;
}
}
/*
* If there are any columns to maximize, find the total
* available width, deducting 3n margins between columns.
* Distribute the available width evenly.
*/
if (nxcol && totalwidth) {
xwidth += 3*maxcol +
(opts->opts & (TBL_OPT_BOX | TBL_OPT_DBOX) ?
2 : !!opts->lvert + !!opts->rvert);
if (xwidth >= totalwidth)
return;
xwidth = totalwidth - xwidth;
/*
* Emulate a bug in GNU tbl width calculation that
* manifests itself for large numbers of x-columns.
* Emulating it for 5 x-columns gives identical
* behaviour for up to 6 x-columns.
*/
if (nxcol == 5) {
quirkcol = xwidth % nxcol + 2;
if (quirkcol != 3 && quirkcol != 4)
quirkcol = -1;
} else
quirkcol = -1;
necol = 0;
ewidth = 0;
for (icol = 0; icol <= maxcol; icol++) {
col = tbl->cols + icol;
if ( ! (col->flags & TBL_CELL_WMAX))
continue;
col->width = (double)xwidth * ++necol / nxcol
- ewidth + 0.4995;
if (necol == quirkcol)
col->width--;
ewidth += col->width;
}
}
}
static void
tblcalc_data(struct rofftbl *tbl, struct roffcol *col,
const struct tbl_opts *opts, const struct tbl_dat *dp)
{
size_t sz;
/* Branch down into data sub-types. */
switch (dp->layout->pos) {
case TBL_CELL_HORIZ:
case TBL_CELL_DHORIZ:
sz = (*tbl->len)(1, tbl->arg);
if (col->width < sz)
col->width = sz;
break;
case TBL_CELL_LONG:
case TBL_CELL_CENTRE:
case TBL_CELL_LEFT:
case TBL_CELL_RIGHT:
tblcalc_literal(tbl, col, dp);
break;
case TBL_CELL_NUMBER:
tblcalc_number(tbl, col, opts, dp);
break;
case TBL_CELL_DOWN:
break;
default:
abort();
}
}
static void
tblcalc_literal(struct rofftbl *tbl, struct roffcol *col,
const struct tbl_dat *dp)
{
size_t sz;
const char *str;
str = dp->string ? dp->string : "";
sz = (*tbl->slen)(str, tbl->arg);
if (col->width < sz)
col->width = sz;
}
static void
tblcalc_number(struct rofftbl *tbl, struct roffcol *col,
const struct tbl_opts *opts, const struct tbl_dat *dp)
{
int i;
size_t sz, psz, ssz, d;
const char *str;
char *cp;
char buf[2];
/*
* First calculate number width and decimal place (last + 1 for
* non-decimal numbers). If the stored decimal is subsequent to
* ours, make our size longer by that difference
* (right-"shifting"); similarly, if ours is subsequent the
* stored, then extend the stored size by the difference.
* Finally, re-assign the stored values.
*/
str = dp->string ? dp->string : "";
sz = (*tbl->slen)(str, tbl->arg);
/* FIXME: TBL_DATA_HORIZ et al.? */
buf[0] = opts->decimal;
buf[1] = '\0';
psz = (*tbl->slen)(buf, tbl->arg);
if (NULL != (cp = strrchr(str, opts->decimal))) {
buf[1] = '\0';
for (ssz = 0, i = 0; cp != &str[i]; i++) {
buf[0] = str[i];
ssz += (*tbl->slen)(buf, tbl->arg);
}
d = ssz + psz;
} else
d = sz + psz;
/* Adjust the settings for this column. */
if (col->decimal > d) {
sz += col->decimal - d;
d = col->decimal;
} else
col->width += d - col->decimal;
if (sz > col->width)
col->width = sz;
if (d > col->decimal)
col->decimal = d;
}
