AERC(1)
# NAME
aerc - a pretty good email client.
# SYNOPSIS
*aerc* [*-h*] [*-v*] [*-a* _<account>_] [*mailto:*_..._ | *:*_<command...>_ | *mbox:*_<file>_]
For a guided tutorial, use *:help tutorial* from aerc, or *man aerc-tutorial*
from your terminal.
# OPTIONS
*-h*
Show aerc usage help and exit.
*-v*
Print the installed version of aerc and exit.
*-a* _<account>_
Load only the named account, as opposed to all configured accounts. It
can also be a comma separated list of names. This option may be
specified multiple times. The account order will be preserved.
*mailto:*_address[,address][?query[&query]]_
Open the composer with the address(es) in the To field. These
addresses must not be percent encoded.
If aerc is already running, the composer is started in this instance,
otherwise aerc will be started.
The following (optional) query parameters are supported:
[[ *Query*
:[ *Description*
| _subject=<text>_
: Subject line will be completed with the _<text>_
| _body=<text>_
: Message body will be completed with the _<text>_
| _cc=<address>[,<address>]_
: Cc header will be completed with the list of addresses
| _bcc=<address>[,<address>]_
: Bcc header will be completed with the list of addresses
| _in-reply-to=<message-id>_
: In-reply-to header will be set to the message id
| _account=<accountname>_
: Specify the account (must be in _accounts.conf_; default is the selected account)
| _template=<template-file>_
: Template sets the template file for creating the message
Note that reserved characters in the queries must be percent encoded.
*:*_<command...>_
Run an aerc-internal command as you would in Ex-Mode. See *RUNTIME
COMMANDS* below.
*mbox:*_<file>_
Open the specified mbox file as a virtual temporary account.
# RUNTIME COMMANDS
To execute a command, press *:* to bring up the command interface. Commands may
also be bound to keys, see *aerc-binds*(5) for details. In some contexts, such
as the terminal emulator, *<c-x>* is used to bring up the command interface.
Different commands work in different contexts, depending on the kind of tab you
have selected.
Dynamic arguments are expanded following *aerc-templates*(7) depending on the
context. For example, if you have a message selected, the following command:
```
:filter -f "{{index (.From | emails) 0}}"
```
Will filter all messages sent by the same sender.
Aerc stores a history of commands, which can be cycled through in command mode.
Pressing the up key cycles backwards in history, while pressing down cycles
forwards.
## GLOBAL COMMANDS
These commands work in any context.
*:help* _<topic>_
Display one of aerc's man pages in the embedded terminal.
*:help* *keys*
Display the active key bindings in the current context.
*:new-account* [*-t*]
Start the new account wizard.
*-t*: Create a temporary account. Do not modify _accounts.conf_.
*:cd* _<directory>_
Changes aerc's current working directory.
*:z* _<directory or zoxide query>_
Changes aerc's current working directory using zoxide. If zoxide is not on
*$PATH*., the command will not be registered.
*:change-tab* [*+*|*-*]_<tab name or index>_++
*:ct* [*+*|*-*]_<tab name or index>_
Changes the focus to the tab with the given name. If a number is given,
it's treated as an index. If the number is prepended with *+* or *-*, the number
is interpreted as a delta from the selected tab. If only a *-* is given, changes
the focus to the previously selected tab.
*:exec* _<command>_
Executes an arbitrary command in the background. Aerc will set the
environment variables *$account* and *$folder* when the command is
executed from an Account tab or an opened message.
Note: commands executed in this way are not executed with the shell.
*:eml* [_<path>_]++
*:preview*
Opens an eml file and displays the message in the message viewer.
Can also be used in the message viewer to open an rfc822 attachment or
in the composer to preview the message.
*:pwd*
Displays aerc's current working directory in the status bar.
*:send-keys* _<keystrokes>_
Send keystrokes to the currently visible terminal, if any. Can be used to
control embedded editors to save drafts or quit in a safe manner.
Here's an example of quiting a Vim-like editor:
*:send-keys* _<Esc>:wq!<Enter>_
Note: when used in _binds.conf_ (see *aerc-binds*(5)), angle brackets
need to be escaped in order to make their way to the command:
<C-q> = :send-keys \\<Esc\\>:wq!\\<Enter\\><Enter>
This way the _<Esc>_ and the first _<Enter>_ keystrokes are passed to
*:send-keys*, while the last _<Enter>_ keystroke is executed directly,
committing the *:send-keys* command's execution.
*:term* [_<command>..._]++
*:terminal*
Opens a new terminal tab with a shell running in the current working
directory, or the specified command.
*:move-tab* [_+_|_-_]_<index>_
Moves the selected tab to the given index. If _+_ or _-_ is specified, the
number is interpreted as a delta from the selected tab.
*:prev-tab* [_<n>_]++
*:next-tab* [_<n>_]
Cycles to the previous or next tab in the list, repeating _<n>_ times
(default: _1_).
*:pin-tab*
Moves the current tab to the left of all non-pinned tabs and displays
the *pinned-tab-marker* (default: _`_) to the left of the tab title.
*:unpin-tab*
Removes the *pinned-tab-marker* from the current tab and returns the tab
to its previous location.
*:prompt* _<prompt>_ _<command>..._
Displays the prompt on the status bar, waits for user input, then appends
that input as the last argument to the command and executes it. The input is
passed as one argument to the command, unless it is empty, in which case no
extra argument is added.
*:choose* *-o* _<key>_ _<text>_ _<command>_ [*-o* _<key>_ _<text>_ _<command>_]...
Prompts the user to choose from various options.
*:suspend*
Suspends the aerc process. Some ongoing connections may be terminated.
*:quit* [*-f*]++
*:exit* [*-f*]
Exits aerc. If a task is being performed that should not be interrupted
(like sending a message), a normal quit call might fail. In this case,
closing aerc can be forced with the *-f* option.
## MESSAGE COMMANDS
These commands are valid in any context that has a selected message (e.g. the
message list, the message in the message viewer, etc).
*:archive* _<scheme>_
Moves the selected message to the archive. The available schemes are:
_flat_: No special structure, all messages in the archive directory
_year_: Messages are stored in folders per year
_month_: Messages are stored in folders per year and subfolders per month
*:accept* [*-e*|*-E*]
Accepts an iCalendar meeting invitation.
*-e*: Forces *[compose].edit-headers* = _true_ for this message only.
*-E*: Forces *[compose].edit-headers* = _false_ for this message only.
*:accept-tentative* [*-e*|*-E*]
Accepts an iCalendar meeting invitation tentatively.
*-e*: Forces *[compose].edit-headers* = _true_ for this message only.
*-E*: Forces *[compose].edit-headers* = _false_ for this message only.
*:copy* [*-p*] _<target>_++
*:cp* [*-p*] _<target>_
Copies the selected message(s) to the target folder.
*-p*: Create the _<target>_ folder if it does not exist.
*:decline* [*-e*|*-E*]
Declines an iCalendar meeting invitation.
*-e*: Forces *[compose].edit-headers* = _true_ for this message only.
*-E*: Forces *[compose].edit-headers* = _false_ for this message only.
*:delete*++
*:delete-message*
Deletes the selected message.
*:envelope* [*-h*] [*-s* _<format-specifier>_]
Opens the message envelope in a dialog popup.
*-h*: Show all header fields
*-s* _<format-specifier>_
User-defined format specifier requiring two _%s_ for the key and
value strings. Default format: _%-20.20s: %s_
*:recall* [*-f*] [*-e*|*-E*]
Opens the selected message for re-editing. Messages can only be
recalled from the postpone directory.
*-f*: Open the message for re-editing even if it is not in the postpone
directory. Aerc remembers the folder, so the further *:postpone* call will
save the message back there.
*-e*: Forces *[compose].edit-headers* = _true_ for this message only.
*-E*: Forces *[compose].edit-headers* = _false_ for this message only.
Original recalled messages are deleted if they are sent or postponed again.
In both cases you have another copy of the message somewhere. Otherwise the
recalled message is left intact. This happens if the recalled message is
discarded after editing. It can be deleted with *:rm* if it is not needed.
*:forward* [*-A*|*-F*] [*-T* _<template-file>_] [*-e*|*-E*] [_<address>_...]
Opens the composer to forward the selected message to another recipient.
*-A*: Forward the message and all attachments.
*-F*: Forward the full message as an RFC 2822 attachment.
*-T* _<template-file>_
Use the specified template file for creating the initial
message body. Unless *-F* is specified, this defaults to what
is set as *forwards* in the *[templates]* section of
_aerc.conf_.
*-e*: Forces *[compose].edit-headers* = _true_ for this message only.
*-E*: Forces *[compose].edit-headers* = _false_ for this message only.
*:move* [*-p*] _<target>_++
*:mv* [*-p*] _<target>_
Moves the selected message(s) to the target folder.
*-p*: Create the _<target>_ folder if it does not exist.
*:pipe* [*-bmp*] _<cmd>_
Downloads and pipes the selected message into the given shell command
(executed with _sh -c "<cmd>"_), and opens a new terminal tab to show
the result. By default, the selected message part is used in the message
viewer and the full message is used in the message list.
Operates on multiple messages when they are marked. When piping multiple
messages, aerc will write them with mbox format separators.
*-b*: Run the command in the background instead of opening a terminal tab
*-m*: Pipe the full message
*-p*: Pipe just the selected message part, if applicable
This can be used to apply patch series with git:
*:pipe -m* _git am -3_
When at least one marked message subject matches a patch series (e.g.
_[PATCH X/Y]_), all marked messages will be sorted by subject to ensure
that the patches are applied in order.
*:reply* [*-acq*] [*-T* _<template-file>_] [*-e*|*-E*]
Opens the composer to reply to the selected message.
*-a*: Reply all
*-c*: Close the view tab when replying. If the reply is not sent, reopen
the view tab.
*-q*: Insert a quoted version of the selected message into the reply editor
*-T* _<template-file>_
Use the specified template file for creating the initial
message body. If *-q* is specified, defaults to what is set as
*quoted-reply* in the *[templates]* section of _aerc.conf_.
*-e*: Forces *[compose].edit-headers* = _true_ for this message only.
*-E*: Forces *[compose].edit-headers* = _false_ for this message only.
*:read* [*-t*]
Marks the marked or selected messages as read.
*-t*: Toggle the messages between read and unread.
*:unread* [*-t*]
Marks the marked or selected messages as unread.
*-t*: Toggle the messages between read and unread.
*:flag* [*-t*] [*-a* | *-x* _<flag>_]
Sets (enables) a certain flag on the marked or selected messages.
*-t*: Toggle the flag instead of setting (enabling) it.
*-a*: Mark message as answered/unanswered.
*-x* _<flag>_: Mark message with specific flag.
The available flags are (adapted from RFC 3501, section 2.3.2):
_Seen_
Message has been read
_Answered_
Message has been answered
_Flagged_
Message is flagged for urgent/special attention
*:unflag* [*-t*] _<flag>_
Operates exactly like *:flag*, defaulting to unsetting (disabling) flags.
*:modify-labels* [_+_|_-_]_<label>_...++
*:tag* [_+_|_-_]_<label>_...
Modify message labels (e.g. notmuch tags). Labels prefixed with a *+* are
added, those prefixed with a *-* removed. As a convenience, labels without
either operand add the specified label.
Example: add _inbox_ and _unread_ labels, remove _spam_ label.
*:modify-labels* _+inbox_ _-spam_ _unread_
*:unsubscribe* [*-e*|*-E*]
Attempt to automatically unsubscribe the user from the mailing list through
use of the List-Unsubscribe header. If supported, aerc may open a compose
window pre-filled with the unsubscribe information or open the unsubscribe
URL in a web browser.
*-e*: Forces *[compose].edit-headers* = _true_ for this message only.
*-E*: Forces *[compose].edit-headers* = _false_ for this message only.
## MESSAGE LIST COMMANDS
*:disconnect*++
*:connect*
Disconnect or reconnect the current account. This only applies to
certain email sources.
*:clear* [*-s*]
Clears the current search or filter criteria.
By default, the selected message will be kept. To clear the selected
message and move cursor to the top of the message list, use the *-s* flag.
*-s*: Selects the message at the top of the message list after clearing.
*:cf* _<folder>_
Change the folder shown in the message list.
*:check-mail*
Check for new mail on the selected account. Non-imap backends require
check-mail-cmd to be set in order for aerc to initiate a check for new mail.
Issuing a manual *:check-mail* command will reset the timer for automatic checking.
*:compose* [*-H* _"<header>: <value>"_] [*-T* _<template-file>_] [*-e*|*-E*] [_<body>_]
Open the compose window to send a new email. The new email will be sent with
the current account's outgoing transport configuration. For details on
configuring outgoing mail delivery consult *aerc-accounts*(5).
*-H* _"<header>: <value>"_
Add the specified header to the message, e.g:
*:compose -H* _"X-Custom: custom value"_
*-T* _<template-file>_
Use the specified template file for creating the initial
message body.
*-e*: Forces *[compose].edit-headers* = _true_ for this message only.
*-E*: Forces *[compose].edit-headers* = _false_ for this message only.
_<body>_: The initial message body.
*:recover* [*-f*] [*-e*|*-E*] _<file>_
Resume composing a message that was not sent nor postponed. The file may
not contain header data unless *[compose].edit-headers* was enabled when
originally composing the aborted message.
*-f*: Delete the _<file>_ after opening the composer.
*-e*: Forces *[compose].edit-headers* = _true_ for this message only.
*-E*: Forces *[compose].edit-headers* = _false_ for this message only.
*:filter* [_<options>_] _<terms>_...
Similar to *:search*, but filters the displayed messages to only the search
results. The search syntax is dependent on the underlying backend.
Refer to *aerc-search*(1) for details
*:mkdir* _<name>_
Creates a new folder for this account and changes to that folder.
*:rmdir* [*-f*]
Removes the current folder.
By default, it will fail if the directory is non-empty (see *-f*).
*-f*
Remove the directory even if it contains messages.
Some programs that sync maildirs may recover deleted directories (e.g.
*offlineimap*). These can either be specially configured to properly
handle directory deletion, or special commands need to be run to delete
directories (e.g. _offlineimap --delete-folder_).
It is possible, with a slow connection and the imap backend, that new
messages arrive in the directory before they show up - using *:rmdir* at
this moment would delete the directory and such new messages before the
user sees them.
*:next* _<n>_[_%_]++
*:next-message* _<n>_[_%_]++
*:prev* _<n>_[_%_]++
*:prev-message* _<n>_[_%_]
Selects the next (or previous) message in the message list. If specified as
a percentage, the percentage is applied to the number of messages shown on
screen and the cursor advances that far.
*:next-folder* _<n>_++
*:prev-folder* _<n>_
Cycles to the next (or previous) folder shown in the sidebar, repeated
_<n>_ times (default: _1_).
*:expand-folder*++
*:collapse-folder*
Expands or collapses the current folder when the directory tree is
enabled.
*:export-mbox* _<file>_
Exports messages in the current folder to an mbox file. If there are marked
messages in the folder, only the marked ones are exported. Otherwise the
whole folder is exported.
*:import-mbox* _<file>_
Imports all messages from an mbox file to the current folder.
*:next-result*++
*:prev-result*
Selects the next or previous search result.
*:search* [_<options>_] _<terms>_...
Searches the current folder for messages matching the given set of
conditions. The search syntax is dependent on the underlying backend.
Refer to *aerc-search*(1) for details.
*:select* _<n>_++
*:select-message* _<n>_
Selects the _<n>_\th message in the message list (and scrolls it into
view if necessary).
*:hsplit* [[_+_|_-_]_<n>_]
*:split* [[_+_|_-_]_<n>_]
Creates a horizontal split, showing _<n>_ messages and a message view
below the message list. If a _+_ or _-_ is prepended, the message list
size will grow or shrink accordingly. The split can be cleared by
calling *:[h]split* _0_, or just *:[h]split*. The split can be toggled
by calling split with the same (absolute) size repeatedly. For example,
*:[h]split* _10_ will create a split. Calling *:[h]split* _10_ again
will remove the split. If not specified, _<n>_ is set to an estimation
based on the user's terminal. Also see *:vsplit*.
*:sort* [[*-r*] _<criterion>_]...
Sorts the message list by the given criteria. *-r* sorts the
immediately following criterion in reverse order.
Available criteria:
[[ *Criterion*
:- *Description*
| _arrival_
:- Date and time of the messages arrival
| _cc_
:- Addresses in the Cc field
| _date_
:- Date and time of the message
| _from_
:- Addresses in the From field
| _read_
:- Presence of the read flag
| _flagged_
:- Presence of the flagged flag
| _size_
:- Size of the message
| _subject_
:- Subject of the message
| _to_
:- Addresses in the To field
*:toggle-threads*
Toggles between message threading and the normal message list.
*:fold* [*-t*]++
*:unfold* [*-t*]
Collapse or un-collapse the thread children of the selected message.
If the toggle flag *-t* is set, the folded status is changed. Folded
threads can be identified by _{{.Thread\*}}_ template attributes
in *[ui].index-columns*. See *aerc-config*(5) and *aerc-templates*(7)
for more details.
*:toggle-thread-context*
Toggles between showing entire thread (when supported) and only showing
messages which match the current query / mailbox.
*:view* [*-p*]++
*:view-message* [*-p*]
Opens the message viewer to display the selected message. If the peek
flag *-p* is set, the message will not be marked as seen and ignores the
*auto-mark-read* config.
*:vsplit* [[_+_|_-_]_<n>_]
Creates a vertical split of the message list. The message list will be
_<n>_ columns wide, and a vertical message view will be shown to the
right of the message list. If a _+_ or _-_ is prepended, the message
list size will grow or shrink accordingly. The split can be cleared by
calling *:vsplit* _0_, or just *:vsplit*. The split can be toggled by
calling split with the same (absolute) size repeatedly. For example,
*:vsplit* _10_ will create a split. Calling *:vsplit* _10_ again will
remove the split. If not specified, _<n>_ is set to an estimation based
on the user's terminal. Also see *:split*.
## MESSAGE VIEW COMMANDS
*:close*
Closes the message viewer.
*:next* _<n>_[_%_]++
*:prev* _<n>_[_%_]
Selects the next (or previous) message in the message list. If specified as
a percentage, the percentage is applied to the number of messages shown on
screen and the cursor advances that far.
*:next-part*++
*:prev-part*
Cycles between message parts being shown. The list of message parts is shown
at the bottom of the message viewer.
*:open* [*-d*] [_<args...>_]
Saves the current message part to a temporary file, then opens it. If no
arguments are provided, it will open the current MIME part with the
matching command in the *[openers]* section of _aerc.conf_. When no match
is found in *[openers]*, it falls back to the default system handler.
*-d*: Delete the temporary file after the opener exits
When arguments are provided:
- The first argument must be the program to open the message part with.
Subsequent args are passed to that program.
- _{}_ will be expanded as the temporary filename to be opened. If it is
not encountered in the arguments, the temporary filename will be
appened to the end of the command.
*:open-link* _<url>_ [_<args...>_]
Open the specified URL with an external program. The opening logic is
the same than for *:open* but the opener program will be looked up
according to the URL scheme MIME type: _x-scheme-handler/<scheme>_.
*:save* [*-fpaA*] _<path>_
Saves the current message part to the given path.
If the path is not an absolute path, *[general].default-save-path* from
_aerc.conf_ will be prepended to the path given.
If path ends in a trailing slash or if a folder exists on disc or if *-a*
is specified, aerc assumes it to be a directory.
When passed a directory *:save* infers the filename from the mail part if
possible, or if that fails, uses _aerc\_$DATE_.
*-f*: Overwrite the destination whether or not it exists
*-p*: Create any directories in the path that do not exist
*-a*: Save all attachments. Individual filenames cannot be specified.
*-A*: Same as *-a* but saves all the named parts, not just attachments.
*:mark* [*-atvT*]
Marks messages. Commands will execute on all marked messages instead of the
highlighted one if applicable. The flags below can be combined as needed.
*-a*: Apply to all messages in the current folder
*-t*: toggle the mark state instead of marking a message
*-v*: Enter / leave visual mark mode
*-V*: Same as *-v* but does not clear existing selection
*-T*: Marks the displayed message thread of the selected message.
*:unmark* [*-at*]
Unmarks messages. The flags below can be combined as needed.
*-a*: Apply to all messages in the current folder
*-t*: toggle the mark state instead of unmarking a message
*:remark*
Re-select the last set of marked messages. Can be used to chain commands
after a selection has been acted upon
*:toggle-headers*
Toggles the visibility of the message headers.
*:toggle-key-passthrough*
Enter or exit the *[view::passthrough]* key bindings context. See
*aerc-binds*(5) for more details.
## MESSAGE COMPOSE COMMANDS
*:abort*
Close the composer without sending, discarding the message in progress.
If the text editor exits with an error (e.g. *:cq* in *vim*(1)), the
message is immediately discarded.
*:attach* _<path>_++
*:attach* *-m* [_<arg>_]++
*:attach* *-r* <name> <cmd>
Attaches the file at the given path to the email. The path can contain
globbing syntax described at https://godocs.io/path/filepath#Match.
*-m* [_<arg>_]
Runs the *file-picker-cmd* to select files to be attached.
Requires an argument when *file-picker-cmd* contains the _%s_ verb.
*-r* <name> <cmd>
Runs the <cmd>, reads its output and attaches it as <name>. The
attachment MIME type is derived from the <name>'s extension.
*:attach-key*
Attaches the public key for the configured account to the email.
*:detach* [_<path>_]
Detaches the file with the given path from the composed email. If no path is
specified, detaches the first attachment instead.
*:cc* _<addresses>_++
*:bcc* _<addresses>_
Sets the Cc or Bcc header to the given addresses. If an editor for the header
is not currently visible in the compose window, a new one will be added.
*:edit* [*-e*|*-E*]
(Re-)opens your text editor to edit the message in progress.
*-e*: Forces *[compose].edit-headers* = _true_ for this message only.
*-E*: Forces *[compose].edit-headers* = _false_ for this message only.
*:multipart* [*-d*] _<mime/type>_
Makes the message to multipart/alternative and add the specified
_<mime/type>_ part. Only the MIME types that are configured in the
*[multipart-converters]* section of _aerc.conf_ are supported and their
related commands will be used to generate the alternate part.
*-d*:
Remove the specified alternative _<mime/type>_ instead of
adding it. If no alternative parts are left, make the message
text/plain (i.e. not multipart/alternative).
*:next-field*++
*:prev-field*
Cycles between input fields in the compose window.
*:postpone* [*-t* _<folder>_]
Saves the current state of the message to the *postpone* folder (from
_accounts.conf_) for the current account by default.
*-t*: Overrides the target folder for saving the message
If the message was force-recalled with *:recall -f* from a different folder,
the *:postpone* command will save it back to that folder instead of the
default *postpone* folder configured in settings. Use *-t* to override that
or use *:mv* to move the saved message to a different folder.
*:save* [*-p*] _<path>_
Saves the selected message part to the specified path. If *-p* is selected,
aerc will create any missing directories in the specified path. If the path
specified is a directory or ends in _/_, aerc will use the attachment filename
if available or a generated name if not.
*:send* [*-a* _<scheme>_] [*-t* _<folder>_]
Sends the message using this accounts default outgoing transport
configuration. For details on configuring outgoing mail delivery consult
*aerc-accounts*(5).
*-a*: Archive the message being replied to. See *:archive* for schemes.
*-t*: Overrides the Copy-To folder for saving the message.
*:switch-account* _<account-name>_++
*:switch-account* *-n*++
*:switch-account* *-p*
Switches the account. Can be used to switch to a specific account from
its name or to cycle through accounts using the *-p* and *-n* flags.
*-p*: switch to previous account
*-n*: switch to next account
*:header* [*-f*] _<name>_ [_<value>_]
*:header* [*-d*] _<name>_
Add a new email header to the compose window. If the header is already
set and is not empty, *-f* must be used to overwrite its value.
*-f*: Overwrite any existing header.
*-d*: Remove the header instead of adding it.
*:encrypt*
Encrypt the message to all recipients. If a key for a recipient cannot
be found the message will not be encrypted.
*:sign*
Sign the message using the account's default key. If *pgp-key-id* is set
in _accounts.conf_ (see *aerc-accounts*(5)), it will be used in
priority. Otherwise, the *From* header address will be used to look for
a matching private key in the pgp keyring.
## TERMINAL COMMANDS
*:close*
Closes the terminal.
# LOGGING
Aerc does not log by default, but collecting log output can be useful for
troubleshooting and reporting issues. Redirecting stdout when invoking aerc will
write log messages to that file:
$ aerc > aerc.log
Persistent logging can be configured via the *log-file* and *log-level* settings
in _aerc.conf_.
# SEE ALSO
*aerc-config*(5) *aerc-imap*(5) *aerc-jmap*(5) *aerc-notmuch*(5) *aerc-smtp*(5)
*aerc-maildir*(5) *aerc-sendmail*(5) *aerc-search*(1) *aerc-stylesets*(7)
*aerc-templates*(7) *aerc-accounts*(5) *aerc-binds*(5) *aerc-tutorial*(7)
# AUTHORS
Originally created by Drew DeVault and maintained by Robin Jarry who is assisted
by other open source contributors. For more information about aerc development,
see _https://sr.ht/~rjarry/aerc/_.
