************************************************************************ * Official mandoc TODO. * $Id$ ************************************************************************ Many issues are annotated for difficulty as follows: - loc = locality of the issue * single file issue, affects file only, or very few ** single module issue, affects several files of one module *** cross-module issue, significantly impacts multiple modules and may require substantial changes to internal interfaces - exist = difficulty of the existing code in this area * affected code is straightforward and easy to read and change ** affected code is somewhat complex, but once you understand the design, not particularly difficult to understand *** affected code uses a special, exceptionally tricky design - algo = difficulty of the new algorithm to be written * the required logic and code is straightforward ** the required logic is somewhat complex and needs a careful design *** the required logic is exceptionally tricky, maybe an approach to solve that is not even known yet - size = the amount of code to be written or changed * a small number of lines (at most 100, usually much less) ** a considerable amount of code (several dozen to a few hundred) *** a large amount of code (many hundreds, maybe thousands) - imp = importance of the issue * mostly for completeness ** would be nice to have *** issue causes considerable inconvenience Obviously, as the issues have not been solved yet, these annotations are mere guesses, and some may be wrong. ************************************************************************ * missing features ************************************************************************ --- missing roff features ---------------------------------------------- - .ad (adjust margins) .ad l -- adjust left margin only (flush left) .ad r -- adjust right margin only (flush right) .ad c -- center text on line .ad b -- adjust both margins (alias: .ad n) .na -- temporarily disable adjustment without changing the mode .ad -- re-enable adjustment without changing the mode Adjustment mode is ignored while in no-fill mode (.nf). loc *** exist *** algo ** size ** imp ** (parser reorg would help) - .fc (field control) found by naddy@ in xloadimage(1) loc ** exist *** algo * size * imp * - .ns (no-space mode) occurs in xine-config(1) when implementing this, also let .TH set it reported by brad@ Sat, 15 Jan 2011 15:45:23 -0500 loc *** exist *** algo *** size ** imp * - \w'' improve width measurements would not be very useful without an expression parser, see below needed for Tcl_NewStringObj(3) via wiz@ Wed, 5 Mar 2014 22:27:43 +0100 loc ** exist *** algo *** size * imp *** --- missing mdoc features ---------------------------------------------- - .Bl -column .Xo support is missing ultimate goal: restore .Xr and .Dv to lib/libc/compat-43/sigvec.3 lib/libc/gen/signal.3 lib/libc/sys/sigaction.2 loc * exist *** algo *** size * imp ** - edge case: decide how to deal with blk_full bad nesting, e.g. .Sh .Nm .Bk .Nm .Ek .Sh found by jmc@ in ssh-keygen(1) from jmc@ Wed, 14 Jul 2010 18:10:32 +0100 loc * exist *** algo *** size ** imp ** - .Bd -filled should not be the same as .Bd -ragged, but align both the left and right margin. In groff, it is implemented in terms of .ad b, which we don't have either. Found in cksum(1). loc *** exist *** algo ** size ** imp ** (parser reorg would help) - implement blank `Bl -column', such as .Bl -column .It foo Ta bar .El loc * exist *** algo *** size * imp * - explicitly disallow nested `Bl -column', which would clobber internal flags defined for struct mdoc_macro loc * exist * algo * size * imp ** - In .Bl -column .It, the end of the line probably has to be regarded as an implicit .Ta, if there could be one, see the following mildly ugly code from login.conf(5): .Bl -column minpasswordlen program xetcxmotd .It path Ta path Ta value of Dv _PATH_DEFPATH .br Default search path. reported by Michal Mazurek via jmc@ Thu, 7 Apr 2011 16:00:53 +0059 loc * exist *** algo ** size * imp ** - inside `.Bl -column' phrases, punctuation is handled like normal text, e.g. `.Bl -column .It Fl x . Ta ...' should give "-x -." - inside `.Bl -column' phrases, TERMP_IGNDELIM handling by `Pf' is not safe, e.g. `.Bl -column .It Pf a b .' gives "ab." but should give "ab ." - prohibit `Nm' from having non-text HEAD children (e.g., NetBSD mDNSShared/dns-sd.1) (mdoc_html.c and mdoc_term.c `Nm' handlers can be slightly simplified) - support translated section names e.g. x11/scrotwm scrotwm_es.1:21:2: error: NAME section must be first that one uses NOMBRE because it is spanish... deraadt tends to think that section-dependent macro behaviour is a bad idea in the first place, so this may be irrelevant loc ** exist ** algo ** size * imp ** - When there is free text in the SYNOPSIS and that free text contains the .Nm macro, groff somehow understands to treat the .Nm as an in-line macro, while mandoc treats it as a block macro and breaks the line. No idea how the logic for distinguishing in-line and block instances should be, needs investigation. uqs@ Thu, 2 Jun 2011 11:03:51 +0200 uqs@ Thu, 2 Jun 2011 11:33:35 +0200 loc * exist ** algo *** size * imp ** --- missing man features ----------------------------------------------- - groff_www(7) .MTO and .URL These macros were used by the GNU grep(1) man page. The groff_www(7) manual page itself uses them, too. We should probably *not* add them to mandoc. Just mentioning this here to keep track of the abuse. Laura Morales 20 Apr 2018 07:33:02 +0200 loc ** exist * algo * size ** imp * --- missing tbl features ----------------------------------------------- - vertical centering in cells vertically spanned with ^ pali dot rohar at gmail dot com 16 Jul 2018 13:03:35 +0200 loc * exist *** algo *** size ** imp * - support mdoc(7) and man(7) macros inside tbl(7) code; probably requires the parser reorg and letting tbl(7) use roff_node such that macro sets can mix; informed by bapt@ that FreeBSD needs this: 3 Jan 2015 23:32:23 +0100 loc *** exist ** algo *** size ** imp *** - look at the POSIX manuals in the books/man-pages-posix port, they use some unsupported tbl(7) features, mostly macros in tbl(7). loc * exist ** algo ** size ** imp *** - look what Joerg Schilling manual pages use Thu, 19 Mar 2015 18:31:48 +0100 --- missing eqn features ----------------------------------------------- - In a matrix, break the output line after each matrix line. Found in the discussion at CDBUG 2015. Suggested by Avi Weinstock. This may not be the ideal solution after all: eqn(7) matrices are lists of columns, so Avi's proposal would show each *column* on its own *line*, which is likely to cause confusion. A better solution, but much harder to implement, would be to actually show the coordinates of column vectors on different terminal output lines, using the clumnated output facilities developed for .Bl -tag, .Bl -column, and also used for tbl(7). loc * exist * algo ** size ** imp ** - The "size" keyword is parsed, but ignored by the formatter. loc * exist * algo * size * imp * - The spacing characters `~', `^', and tab are currently ignored, see User's Guide (Second Edition) page 2 section 4. loc * exist * algo ** size * imp ** - Mark and lineup are parsed and ignored, see User's Guide (Second Edition) page 5 section 15. loc ** exist ** algo ** size ** imp ** - GNU eqn converts some operators to special characters, for example, input HYPHEN-MINUS becomes output \(mi, unless it is part of a quoted word. mandoc(1) only does this when the operator is surrounded by blanks, not when it is part of an unquoted word. Also, check whether there are more such cases (e.g., +?). reported by bentley@ 20 Jun 2017 02:04:29 -0600 loc * exist ** algo ** size * imp * - Primes, opprime, and ' bentley@ Thu, 13 Jul 2017 23:14:20 -0600 --- missing misc features ---------------------------------------------- - man 3am readline does not work because man(1) only accepts digit + one letter, otherwise explicit -s is currently required https://github.com/void-linux/void-packages/issues/9868 loc * exist * algo * size * imp *** - man 3 readline may show readline(3m) because in manpage_compare, "3" and "3am" compare equal https://github.com/void-linux/void-packages/issues/9868 probably requires putting string version of section into struct manpage loc * exist ** algo * size * imp *** - restore flags for result ordering, but only for man(1), not for apropos(1) such that man 3 syslog show syslog.3 not klogctl.3 and such that man 3p acosl shows acosl.3p not acos.3p https://github.com/void-linux/void-packages/issues/9868 loc * exist ** algo * size * imp *** - dead .so links should be entered into the database to avoid: man -M. lvm-config man: outdated mandoc.db lacks lvm-config(8) entry, run makewhatis /co/void-man https://github.com/void-linux/void-packages/issues/9868 loc * exist ** algo * size * imp ** - man -ks 1,8 route; kn@ Jul 13, 2018 orally - italic correction (\/) in PostScript mode Werner LEMBERG on groff at gnu dot org Sun, 10 Nov 2013 12:47:46 loc ** exist ** algo * size * imp * - change the default PAGER to more -Es and use the pager even for apropos title line output; req by bapt@ loc * exist * algo * size * imp *** - clean up escape sequence handling, creating three classes: (1) fully implemented, or parsed and ignored without loss of content (2) unimplemented, potentially causing loss of content or serious mangling of formatting (e.g. \n) -> ERROR see textproc/mgdiff(1) for nice examples (3) undefined, just output the character -> perhaps WARNING loc *** exist ** algo ** size ** imp *** (parser reorg helps) - kettenis wants base roff, ms, and me Fri, 1 Jan 2010 22:13:15 +0100 (CET) loc ** exist ** algo ** size *** imp * --- compatibility checks ----------------------------------------------- - is .Bk implemented correctly in modern groff? sobrado@ Tue, 19 Apr 2011 22:12:55 +0200 - compare output to Heirloom roff, Solaris roff, and http://repo.or.cz/w/neatroff.git http://litcave.rudi.ir/ - look at AT&T DWB http://www2.research.att.com/sw/download Carsten Kunze has patches Mon, 4 Aug 2014 17:01:28 +0200 ported version: https://github.com/n-t-roff/DWB3.3 Carsten Kunze Wed, 22 Apr 2015 11:21:43 +0200 - look at pages generated from reStructeredText, e.g. devel/mercurial hg(1) These are a weird mixture of man(7) and custom autogenerated low-level roff stuff. Figure out to what extent we can cope. For details, see http://docutils.sourceforge.net/rst.html noted by stsp@ Sat, 24 Apr 2010 09:17:55 +0200 reminded by nicm@ Mon, 3 May 2010 09:52:41 +0100 - look at pages generated from ronn(1) github.com/rtomayko/ronn (based on markdown) - look at pages generated from Texinfo source by yat2m, e.g. security/gnupg First impression is not that bad. - look at pages generated by pandoc; see https://github.com/jgm/pandoc/blob/master/src/Text/Pandoc/Writers/Man.hs porting planned by kili@ Thu, 19 Jun 2014 19:46:28 +0200 - check compatibility with Plan9: http://swtch.com/usr/local/plan9/tmac/tmac.an http://swtch.com/plan9port/man/man7/man.html "Anthony J. Bentley" 28 Dec 2010 21:58:40 -0700 - check compatibility with COHERENT troff: http://www.nesssoftware.com/home/mwc/source.php - check compatibility with the man(7) formatter https://raw.githubusercontent.com/rofl0r/hardcore-utils/master/man.c - check compatibility with http://ikiwiki.info/plugins/contrib/mandoc/ https://github.com/schmonz/ikiwiki/compare/mandoc Amitai Schlair Mon, 19 May 2014 14:05:53 -0400 - check features of the Slackware man.conf(5) format Carsten Kunze Wed, 11 Mar 2015 17:57:24 +0100 ************************************************************************ * formatting issues: ugly output ************************************************************************ - revisit empty in-line macros look at the difference between "Em x Em ." and "Sq x Em ." Carsten Kunze Fri, 12 Dec 2014 00:15:41 +0100 loc *** exist *** algo *** size * imp ** - a column list with blank `Ta' cells triggers a spurious start-with-whitespace printing of a newline - In .Bl -column, .It a"bc" shows the quotes in groff, but not in mandoc loc * exist *** algo ** size * imp ** - In .Bl -column, .It Em AuthenticationKey Length ought to render "Key Length" with emphasis, too, see OpenBSD iked.conf(5). reported again Nicolas Joly via wiz@ Wed, 12 Oct 2011 00:20:00 +0200 loc * exist *** algo *** size ** imp *** - empty phrases in .Bl column produce too few blanks try e.g. .Bl -column It Ta Ta reported by millert Fri, 02 Apr 2010 16:13:46 -0400 loc * exist *** algo *** size * imp ** - .%T can have trailing punctuation. Currently, it puts the trailing punctuation into a trailing MDOC_TEXT element inside its own scope. That element should rather be outside its scope, such that the punctuation does not get underlines. This is not trivial to implement because .%T then needs some features of in_line_eoln() - slurp all arguments into one single text element - and one feature of in_line() - put trailing punctuation out of scope. Found in mount_nfs(8) and exports(5), search for "Appendix". loc ** exist ** algo *** size * imp ** - Trailing punctuation after .%T triggers EOS spacing, at least outside .Rs (eek!). Simply setting ARGSFL_DELIM for .%T is not the right solution, it sends mandoc into an endless loop. reported by Nicolas Joly Sat, 17 Nov 2012 11:49:54 +0100 loc * exist ** algo ** size * imp ** - global variables in the SYNOPSIS of section 3 pages .Vt vs .Vt/.Va vs .Ft/.Va vs .Ft/.Fa ... from kristaps@ Tue, 08 Jun 2010 11:13:32 +0200 - implicit whitespace around inline equations example code: where '$times$' denotes matrix multiplication must not have an HTML line break, nor a blank, before partial solution: html.c {"math", HTML_NLINSIDE | HTML_INDENT}, bentley@ Thu, 13 Jul 2017 19:00:59 -0600 - in enclosures, mandoc sometimes fancies a bogus end of sentence reminded by jmc@ Thu, 23 Sep 2010 18:13:39 +0059 loc * exist ** algo *** size * imp *** - a line starting with "\fB something" counts as starting with whitespace and triggers a line break; found in audio/normalize-mp3(1) This will become easier once escape sequences are represented by syntax tree nodes. loc ** exist * algo ** size * imp ** - formatting /usr/local/man/man1/latex2man.1 with groff and mandoc reveals lots of bugs both in groff and mandoc... reported by bentley@ Wed, 22 May 2013 23:49:30 -0600 --- PostScript and PDF issues ------------------------------------------ - PDF output doesn't use a monospaced font for .Bd -literal Example: "mandoc -Tpdf afterboot.8 > output.pdf && pdfviewer output.pdf". Search the text "Routing tables". Also check what PostScript mode does when fixing this. reported by juanfra@ Wed, 04 Jun 2014 21:44:58 +0200 instructions from juanfra@ Wed, 11 Jun 2014 02:21:01 +0200 add a new <> block to the PDF files with /BaseFont /Courier and change the /Name from /F0 to the new font (/F5 (?)). re-reported by tb@ Mon, 16 Mar 2015 16:47:21 +0100 loc * exist ** algo ** size * imp ** --- HTML issues -------------------------------------------------------- - .Bf at the beginning of a paragraph inserts a bogus 1ex horizontal space, see for example random(3). Introduced in http://mdocml.bsd.lv/cgi-bin/cvsweb/mdoc_html.c.diff?r1=1.91&r2=1.92 reported by deraadt@ Mon, 28 Sep 2015 20:14:13 -0600 (MDT) loc ** exist ** algo ** size * imp * - jsg on icb, Nov 3, 2014: try to guess Xr in man(7) for hyperlinking and render them with https://github.com/Debian/debiman/issues/15 loc * exist * algo ** size ** imp ** - The tables used to render the three-part page headers actually force the width of the to the max-width given for . Not yet sure how to fix that... Observed by an Anonymous Coward on undeadly.org: http://undeadly.org/cgi?action=article&sid=20140925064244&pid=1 loc * exist * algo ** size * imp *** - generate tags in HTML idea from florian@ Tue, 7 Apr 2015 00:26:28 +0000 may be possible to implement with .Lk img://something.png alt_text - check https://github.com/trentm/mdocml ************************************************************************ * formatting issues: gratuitous differences ************************************************************************ - .Fn reopens a new scope after punctuation in mandoc, but closes its scope for good in groff. Do we want to change mandoc or groff? Steffen Nurpmeso Sat, 08 Nov 2014 13:34:59 +0100 loc * exist ** algo ** size * imp ** - In .Bl -enum -width 0n, groff continues one the same line after the number, mandoc breaks the line. mail to kristaps@ Mon, 20 Jul 2009 02:21:39 +0200 loc * exist ** algo ** size * imp ** - .Pp between two .It in .Bl -column should produce one, not two blank lines, see e.g. login.conf(5). reported by jmc@ Sun, 17 Apr 2011 14:04:58 +0059 reported again by sthen@ Wed, 18 Jan 2012 02:09:39 +0000 (UTC) loc * exist *** algo ** size * imp ** - If the *first* line after .It is .Pp, break the line right after the tag, do not pad with space characters before breaking. See the description of the a, c, and i commands in sed(1). loc * exist ** algo ** size * imp ** - If the first line after .It is .D1, do not assert a blank line in between, see for example tmux(1). reported by nicm@ 13 Jan 2011 00:18:57 +0000 loc * exist ** algo ** size * imp ** - Trailing punctuation after .It should trigger EOS spacing. reported by Nicolas Joly Sat, 17 Nov 2012 11:49:54 +0100 Probably, this should be fixed somewhere in termp_it_pre(), not sure. loc * exist ** algo ** size * imp ** - When the -width string contains macros, the macros must be rendered before measuring the width, for example .Bl -tag -width ".Dv message" in magic(5), located in src/usr.bin/file, is the same as -width 7n, not -width 11n. The same applies to .Bl -column column widths; reported again by Nicolas Joly Thu, 1 Mar 2012 13:41:26 +0100 via wiz@ 5 Mar reported again by Franco Fichtner Fri, 27 Sep 2013 21:02:28 +0200 reported again by Bruce Evans Fri, 17 Feb 2017 21:22:44 +0100 via bapt@ loc *** exist *** algo *** size ** imp *** An easy partial fix would be to just skip the first word if it starts with a dot, including any following white space, when measuring. loc * exist * algo * size * imp *** - The \& zero-width character counts as output. That is, when it is alone on a line between two .Pp, we want three blank lines, not two as in mandoc. loc ** exist ** algo ** size * imp ** - Sequences of multiple man(7) paragraphs (.PP, .IP) interspersed with .ps and .nf/.fi produce execessive blank lines, see libJudy and graphics/dcmtk. The parser reorg may help with this. - trailing whitespace must be ignored even when followed by a font escape, see for example makes \fBdig \fR operate in batch mode in dig(1). loc ** exist ** algo ** size * imp ** ************************************************************************ * warning issues ************************************************************************ - warn about duplicate .Sh/.Ss heads gre(4): Rename duplicate sections 20 Apr 2018 15:27:33 +0200 loc * exist * algo * size * imp ** - style message about macros inside .Bd -literal and .Dl, in particular font changing macros like .Cm, .Ar, .Fa (from the mdoclint TODO) - style message about mismatches between the section number in the file name (if it is known) and the section number in .Dt (from the mdoclint TODO) - style message about NULL without .Dv (from the mdoclint TODO) - style message about error constants without .Er (from the mdoclint TODO) - warn when .Sh or .Ss contain other macros Steffen Nurpmeso, savannah.gnu.org/bugs/index.php?45034 loc * exist * algo * size * imp ** - style message about violations of the convention .An name Aq Mt localpart@domain in AUTHORS (from the mdoclint TODO) - warn about attempts to call non-callable macros Steffen Nurpmeso Tue, 11 Nov 2014 22:55:16 +0100 Note that formatting is inconsistent in groff. .Fn Po prints "Po()", .Ar Sh prints "file ..." and no "Sh". Relatively hard because the relevant code is scattered all over mdoc_macro.c and all subtly different. loc ** exist ** algo ** size ** imp ** - warn about punctuation - e.g. ',' and ';' - at the beginning of a text line, if it is likely intended to follow the preceding output without intervening whitespace, in particular after a macro line (from the mdoclint TODO) - makewhatis -p complains about language subdirectories: /usr/local/man//ru: Unknown directory part ************************************************************************ * documentation issues ************************************************************************ - mark macros as: page structure domain, manual domain, general text domain is this useful? - mention /usr/share/misc/mdoc.template in mdoc(7)? - Is all the content from http://www.std.com/obi/BSD/doc/usd/28.tbl/tbl covered in tbl(7)? ************************************************************************ * performance issues ************************************************************************ - the PDF file is HUGE: this can be reduced by using relative offsets ************************************************************************ * structural issues ************************************************************************ - POSIX says in the documentation of sysconf(3) that PATH_MAX is allowed to be so large that it is a bad idea to use it for sizing static buffers. So use dynamic buffers throughout. See the file test-PATH_MAX.c for details. Found by Aaron M. Ucko in the GNU Hurd via Bdale Garbee, https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=829624 - Is it possible to further simplify ENDBODY_SPACE? - Find better ways to prevent endless loops in roff(7) macro and string expansion. - make buffers for parsing functions const christos@ via wiz@ Fri, 18 Dec 2015 17:10:01 +0100 - struct mparse refactoring Steffen Nurpmeso Thu, 04 Sep 2014 12:50:00 +0200 ************************************************************************ * CGI issues ************************************************************************ - Enable HTTP compression by detecting gzip encoding and filtering output through libz. - Privilege separation (see OpenSSH). - Enable caching support via HTTP 304 and If-Modified-Since. ************************************************************************ * to improve in the groff_mdoc(7) macros ************************************************************************ - .Cd # arch1, arch2 in section 4 pages: find better way to indicate multiple architectures, maybe: allow .Dt vgafb 4 "macppc sparc64" already shown as "Device Drivers Manual (macppc sparc64)" for apropos, make that "vgafb(4) - macppc # sparc64" instead of "- all" groff can be made to show multiple arches, too, but it is tedious to do the string parsing in roff code... jmc@ 23 Apr 2018 07:24:52 +0100 [man for vgafb(4)...] loc ** exist ** algo * size * imp *** - use uname(1) to set doc-default-operating-system at install time tobimensch Mon, 1 Dec 2014 00:25:07 +0100 - apostrophe (39), circumflex (94), grave (96), tilde (126) in manuals: \(aq, \(ha, \`, \(ti Re: [Groff] ASCII Minus Sign in man Pages. bentley@ 26 Apr 2017 10:02:06 -0600 Do we need to fix existing manuals? Do we need to fix the definition of the mdoc(7) language?