@Section
    @Tag { dia_labe }
    @Title { Labels }
@Begin
@PP
Diagrams often contain small @I labels adjacent to their nodes and links:
diagrams. @RawIndex { diagrams }
diagrams.labels @SubIndex { labels }
labels. @RawIndex { labels }
labels.in.diagrams @SubIndex { in diagrams }
@CD @Diag
    nodelabelformat { @I @Body }
{
@Tab
    @Fmta { @Col A ! @Col ! @Col ! @Col B ! @Col ! @Col ! @Col C }
{
@Rowa
    B { B:: @Circle alabel { b } }
@Rowa
    A { A:: @Circle alabel { a } }
@Rowa
    C { C:: @Circle dlabel { c } }
}
//
@Arrow from { A } to { B } ylabel { 10 }
@Arrow from { A } to { C } ylabel { 15 }
@Arrow from { B } to { C } ylabel { 20 }
}
Each node may have up to four labels, called {@Code alabel}, {@Code blabel},
diagrams. @RawIndex { diagrams }
diagrams.alabel @SubIndex { @Code "alabel" option }
alabel.diagrams @Index { @Code "alabel" option (diagrams) }
diagrams. @RawIndex { diagrams }
diagrams.blabel @SubIndex { @Code "blabel" option }
blabel.diagrams @Index { @Code "blabel" option (diagrams) }
diagrams. @RawIndex { diagrams }
diagrams.clabel @SubIndex { @Code "clabel" option }
clabel.diagrams @Index { @Code "clabel" option (diagrams) }
diagrams. @RawIndex { diagrams }
diagrams.dlabel @SubIndex { @Code "dlabel" option }
dlabel.diagrams @Index { @Code "dlabel" option (diagrams) }
{@Code clabel}, and {@Code dlabel}:
@ID {
@Code @Verbatim {
@Ellipse
    alabel { a }
    blabel { b }
    clabel { c }
    dlabel { d }
{ Hello, world }
}
||7ct
@VContract @Diag {
@Ellipse
    alabel { a }
    blabel { b }
    clabel { c }
    dlabel { d }
{ Hello, world }
}
}
Links also have labels, five in fact:
diagrams. @RawIndex { diagrams }
diagrams.fromlabel @SubIndex { @Code "fromlabel" option }
fromlabel.diagrams @Index { @Code "fromlabel" option (diagrams) }
diagrams. @RawIndex { diagrams }
diagrams.xlabel @SubIndex { @Code "xlabel" option }
xlabel.diagrams @Index { @Code "xlabel" option (diagrams) }
diagrams. @RawIndex { diagrams }
diagrams.ylabel @SubIndex { @Code "ylabel" option }
ylabel.diagrams @Index { @Code "ylabel" option (diagrams) }
diagrams. @RawIndex { diagrams }
diagrams.zlabel @SubIndex { @Code "zlabel" option }
zlabel.diagrams @Index { @Code "zlabel" option (diagrams) }
diagrams. @RawIndex { diagrams }
diagrams.tolabel @SubIndex { @Code "tolabel" option }
tolabel.diagrams @Index { @Code "tolabel" option (diagrams) }
@ID {
@Code @Verbatim {
@Link
    fromlabel { f }
    xlabel { x }
    ylabel { y }
    zlabel { z }
    tolabel { t }
}
||7ct
@VContract @Diag {
3c @Wide 1c @High
//
@Link
    from { 0 0 }
    to { 1,1 }
    fromlabel { f }
    xlabel { x }
    ylabel { y }
    zlabel { z }
    tolabel { t }
}
}
The {@Code fromlabel} and {@Code tolabel} options are positioned directly
over the endpoints of the link, and {@Code fromlabel} is by default printed
at a funny angle, because these labels are the means of attaching
arrowheads to links:
@ID {
@Code @Verbatim {
@Link
    tolabel { @SolidArrowHead }
}
||7ct
@VContract @Diag {
3c @Wide 1c @High
//
@Link
    from { 0 0 }
    to { 1,1 }
    tolabel { @SolidArrowHead }
}
}
@Code "@SolidArrowHead" is a symbol available for use anywhere whose value
is an object in the shape of a small solid arrowhead.  The arrowhead
options of Section {@NumberOf dia_link} work by setting {@Code fromlabel}
and {@Code tolabel} in exactly this way.  Usually it is best to forget
about {@Code fromlabel} and {@Code tolabel}, and think of links as having
three labels:  {@Code xlabel} near the start, {@Code ylabel} in the
middle, and {@Code zlabel} near the end.
@PP
Adding a label will not change the size of the diagram or the position
of any node, link, or other label.  Although a label may be an arbitrary
object, it is treated as having zero size and will overstrike anything
that happens to be where it wants to go.
@PP
There are options for controlling the appearance and position of
labels.  These are described below mainly for {@Code alabel}, but there
are corresponding options for all nine labels.
@PP
The {@Code alabelfont} and {@Code alabelbreak} options determine the
diagrams. @RawIndex { diagrams }
diagrams.labelfont @SubIndex { @Code "labelfont" options }
labelfont. @RawIndex { @Code "labelfont" options }
labelfont.in.diagrams @SubIndex { in diagrams }
diagrams. @RawIndex { diagrams }
diagrams.labelbreak @SubIndex { @Code "labelbreak" options }
labelbreak. @RawIndex { @Code "labelbreak" options }
labelbreak.in.diagrams @SubIndex { in diagrams }
font and paragraph breaking style of the label:
@ID {
@Code @Verbatim {
@Ellipse
    alabel { a }
    alabelfont { -2p }
    alabelbreak { ragged nohyphen }
{ Hello, world }
}
||7ct
@VContract @Diag {
@Ellipse
    alabel { a }
    alabelfont { -2p }
    alabelbreak { ragged nohyphen }
{ Hello, world }
}
}
This example shows the default values of these two options; @Code "-2p"
explains why the labels in earlier examples were printed in a smaller
font size.  There is also an {@Code alabelformat} option which allows
diagrams. @RawIndex { diagrams }
diagrams.labelformat @SubIndex { @Code "labelformat" options }
labelformat. @RawIndex { @Code "labelformat" options }
labelformat.in.diagrams @SubIndex { in diagrams }
for more radical changes in appearance:
@ID {
@Code @Verbatim {
@Ellipse
    alabel { a }
    alabelformat { @Box @I @Body }
{ Hello, world }
}
||7ct
@Diag {
//0.5c
@Ellipse
    alabel { a }
    alabelformat { @Box @I @Body }
{ Hello, world }
}
}
The value attached to the ellipse will be the value of {@Code alabelformat},
with any @Code "@Body" symbol within it replaced by the value of the
{@Code alabel} option.  This example produces boxed italic labels.
@PP
Nodes also have {@Code nodelabelfont}, {@Code nodelabelbreak}, and
{@Code nodelabelformat} options which work in the same way but affect all
of the node labels, not just one:
@ID {
@Code @Verbatim {
@Ellipse
    nodelabelformat
        { @Box @I @Body }
    alabel { a }
    blabel { b }
{ Hello, world }
}
||7ct
@Diag {
//0.5c
@Ellipse
    nodelabelformat { @Box @I @Body }
    alabel { a }
    blabel { b }
{ Hello, world }
}
}
Links similarly have {@Code linklabelfont}, {@Code linklabelbreak}, and
{@Code linklabelformat} options which affect all the link labels
(except {@Code fromlabel} and {@Code tolabel}, since that would produce
results that people do not expect.)  The @Code "@Diag" symbol also has
these options, in the usual way, and they are extremely useful there:
@ID {
@Code @Verbatim {
@Diag
    nodelabelfont { Slope -2p }
    linklabelformat { "/"@Body"/" }
    hsize { 1.8c }
{
    A:: @Ellipse alabel { a } { OK }
    @DP
    @DP
    B:: @Ellipse alabel { b } { FAULT }
    //
    @Arrow from { A } to { B } ylabel { sig }
}
}
||7ct
@VContract @Diag
    nodelabelfont { Slope -2p }
    linklabelformat { "/"@Body"/" }
    hsize { 1.8c }
{
    A:: @Ellipse alabel { a } { OK }
    @DP
    @DP
    B:: @Ellipse alabel { b } { FAULT }
    //
    @Arrow  from { A } to { B } ylabel { sig }
}
}
These settings specify that every node label will be set in italics,
two points smaller than the surrounding text, and that every link label
will appear between two @Code "/" characters, also two points smaller
because the default value of @Code "linklabelfont" still applies.  Of
course, it remains open to any node or link to override these settings
by supplying its own label options.
@PP
The remaining five label options, {@Code alabelpos}, {@Code alabelangle},
{@Code alabelprox}, {@Code alabelmargin}, {@Code alabelctr}, and
{@Code alabeladjust},
affect the position of the label.  Don't be daunted by the number of
options.  As previous examples have shown, they all have sensible
default values and thus need to be set only rarely.
@PP
Each label inhabits its own characteristic region of the node or
link:  {@Code alabel} in the north-east corner of the node,
{@Code ylabel} halfway along the link, and so on.  This general
location of the label is defined by the {@Code alabelpos} option.  Here
diagrams. @RawIndex { diagrams }
diagrams.labelpos @SubIndex { @Code "labelpos" options }
labelpos.diagrams @Index { @Code "labelpos" options (diagrams) }
are the default values for all nine labels:
@IL
@LI {
@Code @Verbatim {
@Node
    alabelpos { NE }
    blabelpos { NW }
    clabelpos { SW }
    dlabelpos { SE }
}
||7ct
@VContract @Diag {
//0.5f
@ShowTags @Ellipse { 3c @Wide 2c @High }
}
}
@LI {
@Code @Verbatim {
@Link
    fromlabelpos { FROM }
    xlabelpos { LFROM }
    ylabelpos { LMID }
    zlabelpos { LTO }
    tolabelpos { TO }
}
||7ct
@VContract @Diag {
//1.0f
2c @Wide 2.2c @High
//
@ShowTags @Link
    from { 0,0.7 }
    to { 1,0 }
    # tolabel { @SolidArrowHead }
}
}
@EL
Thus, by changing @Code clabelpos to @Code S you can move the position
of the @Code clabel label to beneath the node.  You can do this for every
node by setting this option in the @Code "@Diag" symbol, as was done for
the formatting options above.
@PP
In a similar vein, there is an @Code { xindent } option which controls how
diagrams. @RawIndex { diagrams }
diagrams.xindent @SubIndex { @Code "xindent" option }
xindent.diagrams @Index { @Code "xindent" option (diagrams) }
far from the start of the link the @Code "LFROM" tag, and hence the
{@Code xlabel}, will appear.  A similar option, @Code { zindent }, determines
diagrams. @RawIndex { diagrams }
diagrams.zindent @SubIndex { @Code "zindent" option }
zindent.diagrams @Index { @Code "zindent" option (diagrams) }
how far from the end of the link the @Code "LTO" tag and hence the
{@Code zlabel} will appear:
@ID {
@Code @Verbatim {
@Link
    xindent { 1f }
    zindent { 2f }
}
||7ct
@VContract @Diag {
//1f
2c @Wide 1.2c @High
//
@ShowTags @Link
    xindent { 1f }
    zindent { 2f }
    from { 0,0.7 }
    to { 1,0 }
}
}
Both options have default value {@Code 0.8f}.
@PP
The @Code alabelangle option determines the angle at which the label is
diagrams. @RawIndex { diagrams }
diagrams.labelangle @SubIndex { @Code "labelangle" options }
labelangle.diagrams @Index { @Code "labelangle" options (diagrams) }
printed:
@ID @Tab
    @Fmta { @Col @Code A ! @Col B }
{
@Rowa
    A { "alabelangle { horizontal }" }
    B { Horizontal (the default) }
@Rowa
    A { "alabelangle { aligned }" }
    B { Aligned with the node outline or link path }
@Rowa
    A { "alabelangle { perpendicular }" }
    B { Perpendicular to the outline or link path }
}
The @Code "alabelprox" option determines where in the proximity of
diagrams. @RawIndex { diagrams }
diagrams.labelprox @SubIndex { @Code "labelprox" options }
labelprox.diagrams @Index { @Code "labelprox" options (diagrams) }
@Code alabelpos the label is printed:
@ID @Tab
    @Fmta { @Col @Code A ! @Col B }
{
@Rowa
    A { "alabelprox { above }" }
    B { Above the node outline or link path (the default for link labels) }
@Rowa
    A { "alabelprox { below }" }
    B { Below the node outline or link path }
@Rowa
    A { "alabelprox { left }" }
    B { To the left of the node outline or link path }
@Rowa
    A { "alabelprox { right }" }
    B { To the right of the node outline or link path }
@Rowa
    A { "alabelprox { inside }" }
    B { Inside the node outline or on the left of the link path
going from @Code from to @Code to }
@Rowa
    A { "alabelprox { outside }" }
    B { Outside the node outline or on the right of the link path
going from @Code from to @Code to (the default for node labels) }
}
The {@Code alabelmargin} option adds a margin around all four sides of
diagrams. @RawIndex { diagrams }
diagrams.labelmargin @SubIndex { @Code "labelmargin" options }
labelmargin. @RawIndex { @Code "labelmargin" options }
labelmargin.in.diagrams @SubIndex { in diagrams }
the label, thereby moving it away from {@Code alabelpos} irrespective of
which direction it happens to lie in:
@ID {
@Code @Verbatim {
@Ellipse
    alabel { a }
    alabelmargin { 0f }
{ Hello, world }
}
||7ct
@VContract @Diag {
@Ellipse
    alabel { a }
    alabelmargin { 0f }
{ Hello, world }
}
}
The default value is {@Code 0.2f}, and so there is scope for some
reduction as well as increase.
@PP
@@Diag takes careful account of the @Code alabelangle option, the
@Code alabelprox option, the direction that the node outline or link
path is heading, and which label it is, and places the label in a way
that looks good nearly always.  When it doesn't, the remainder of this
section should help.
@PP
The @Code alabelangle option may be given an arbitrary angle, and then
the label will be printed at that angle.  There are also the special
values @Code parallel and {@Code antiparallel}, which give the direction
that the node outline or link path is going at that point and its
opposite.  These are the default values for @Code tolabelangle and
@Code fromlabelangle respectively, which explains why arrowheads point the
right way.  The @Code aligned value above is one of these two angles,
the one closest to {@Code 0d}.
@PP
The @Code alabelprox option may be {@Code N},
{@Code S}, {@Code E}, {@Code W}, {@Code NE}, {@Code SE}, {@Code NW},
{@Code SW}, {@Code NNW}, {@Code NNE}, {@Code SSW}, {@Code SSE}, or {@Code CTR}:
@CD @Diag {
//1f
@ShowTags @Box margin { 0.5c } { 24p @Font grey @Colour @I label }
}
meaning that the indicated point of the label will coincide with
{@Code alabelpos}.  These points lie on the outside of the margins
added by {@Code alabelmargin}.
@PP
The six values of @Code alabelprox given earlier (@Code { above },
@Code { below }, etc.) all produce one of {@Code N}, {@Code S} etc. for
their ultimate result; which one they produce depends on the direction
the outline or link is going at that point.  For example, @Code { above }
produces @Code { SE } when the outline or link is going from northeast
to southwest or vice versa, @Code { SW } when the outline or link is
going from northwest to southeast and vice versa, and @Code { S } when
it happens to be exactly horizontal.  There is also a dependence
on which label it is:  for example, if it is @Code "xlabel" and the
direction happens to be vertical, the result is {@Code "NW"}.
@PP
The preceding discussion is all under the assumption that the
@Code "alabelctr" option is {@Code no}.  When it is {@Code "yes"},
a small adjustment is made to the position of the label.  The selected
corner or side midpoint of the label will no longer coincide with
{@Code alabelpos}, although it will still lie on the straight line passing
through {@Code alabelpos} at the angle of {@Code alabelpos}.  The corner
or side midpoint slides up or down this line to the point which
minimises the distance from {@Code alabelpos} to the centre of the
label.  Only @Code ylabelctr has @Code "yes" for its default value; the
diagrams. @RawIndex { diagrams }
diagrams.labelctr @SubIndex { @Code "labelctr" options }
labelctr.diagrams @Index { @Code "labelctr" options (diagrams) }
@Code y label often looks better centred when this adjustment is made,
particularly on lines with shallow but non-zero slope:
@CD @Tab
    @Fmta { @Col @CC A ! @Col ! @Col @CC B }
{
@Rowa
    A { @Code "ylabelctr { no }" }
    B { @Code "ylabelctr { yes }" }
@Rowa
@Rowa
@Rowa
    A { @Diag ylabelctr { no } {
        A:: @Square //0.5c &3c B:: @Square
        //
        @Link from { A } to { B } ylabel { @I { ylabel } }
      } }
    B { @Diag ylabelctr { yes } {
        A:: @Square //0.5c &3c B:: @Square
        //
        @Link from { A } to { B } ylabel { @I { ylabel } }
      } }
}
since it is then the centre of the label which is centred on the link,
rather than one of its corners.
@PP
Finally, when all else fails there is an {@Code alabeladjust} option
diagrams. @RawIndex { diagrams }
diagrams.labeladjust @SubIndex { @Code "labeladjust" options }
labeladjust. @RawIndex { @Code "labeladjust" options }
labeladjust.in.diagrams @SubIndex { in diagrams }
which translates the label by an arbitrary amount:
@ID @Code "alabeladjust { -0.5c 1.5c }"
causes the label to appear 0.5 centimetres to the left of and 1.5 centimetres
above the point where it otherwise would have done.
@End @Section