From cc4355020267315ed431472cd89e4ec46c873f0d Mon Sep 17 00:00:00 2001 From: Matěj Cepl Date: Sun, 22 Apr 2018 02:08:10 +0200 Subject: Remove previous attemps which are now obsolete. Also add some missing RFCs. --- standards/rfc6851.txt | 451 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 451 insertions(+) create mode 100644 standards/rfc6851.txt (limited to 'standards/rfc6851.txt') diff --git a/standards/rfc6851.txt b/standards/rfc6851.txt new file mode 100644 index 0000000..a82331a --- /dev/null +++ b/standards/rfc6851.txt @@ -0,0 +1,451 @@ + + + + + + +Internet Engineering Task Force (IETF) A. Gulbrandsen +Request for Comments: 6851 +Category: Standards Track N. Freed, Ed. +ISSN: 2070-1721 Oracle + January 2013 + + + Internet Message Access Protocol (IMAP) - MOVE Extension + +Abstract + + This document defines an IMAP extension consisting of two new + commands, MOVE and UID MOVE, that are used to move messages from one + mailbox to another. + +Status of This Memo + + This is an Internet Standards Track document. + + This document is a product of the Internet Engineering Task Force + (IETF). It represents the consensus of the IETF community. It has + received public review and has been approved for publication by the + Internet Engineering Steering Group (IESG). Further information on + Internet Standards is available in Section 2 of RFC 5741. + + Information about the current status of this document, any errata, + and how to provide feedback on it may be obtained at + http://www.rfc-editor.org/info/rfc6851. + +Copyright Notice + + Copyright (c) 2013 IETF Trust and the persons identified as the + document authors. All rights reserved. + + This document is subject to BCP 78 and the IETF Trust's Legal + Provisions Relating to IETF Documents + (http://trustee.ietf.org/license-info) in effect on the date of + publication of this document. Please review these documents + carefully, as they describe your rights and restrictions with respect + to this document. Code Components extracted from this document must + include Simplified BSD License text as described in Section 4.e of + the Trust Legal Provisions and are provided without warranty as + described in the Simplified BSD License. + + + + + + + + +Gulbrandsen & Freed Standards Track [Page 1] + +RFC 6851 IMAP - MOVE Extension January 2013 + + +1. Introduction + + This document defines an IMAP [RFC3501] extension to facilitate + moving messages from one mailbox to another. This is accomplished by + defining a new MOVE command and extending the UID command to allow + UID MOVE. + + A move function is not provided in the base IMAP specification, so + clients have instead had to use a combination of the COPY, STORE, and + EXPUNGE commands to perform this very common operation. + + Implementors have long pointed out some shortcomings with this + approach. Because the moving of a message is not an atomic process, + interruptions can leave messages in intermediate states. Because + multiple clients can be accessing the mailboxes at the same time, + clients can see messages in intermediate states even without + interruptions. If the source mailbox contains other messages that + are flagged for deletion, the third step can have the side effect of + expunging more than just the set of moved messages. Additionally, + servers with certain types of back-end message stores might have + efficient ways of moving messages, which don't involve the actual + copying of data. Such efficiencies are often not available to the + COPY/STORE/EXPUNGE process. + + The MOVE extension is present in any IMAP implementation that returns + "MOVE" as one of the supported capabilities to the CAPABILITY + command. + +2. Conventions Used in This Document + + The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", + "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this + document are to be interpreted as described in [RFC2119]. + + Formal syntax is specified using ABNF [RFC5234]. + + Example lines prefaced by "C:" are sent by the client and ones + prefaced by "S:" by the server. + + + + + + + + + + + + + +Gulbrandsen & Freed Standards Track [Page 2] + +RFC 6851 IMAP - MOVE Extension January 2013 + + +3. MOVE and UID MOVE + +3.1. MOVE Command + + Arguments: sequence set + mailbox name + + Responses: no specific responses for this command + + Result: OK - move completed + + NO - move error: can't move those messages or to that name + + BAD - command unknown or arguments invalid + +3.2. UID MOVE Command + + This extends the first form of the UID command (see [RFC3501], + Section 6.4.8) to add the MOVE command defined above as a valid + argument. + +3.3. Semantics of MOVE and UID MOVE + + The MOVE command takes two arguments: a message set (sequence numbers + for MOVE, UIDs for UID MOVE) and a named mailbox. Each message + included in the set is moved, rather than copied, from the selected + (source) mailbox to the named (target) mailbox. + + This means that a new message is created in the target mailbox with a + new UID, the original message is removed from the source mailbox, and + it appears to the client as a single action. This has the same + effect for each message as this sequence: + + 1. [UID] COPY + + 2. [UID] STORE +FLAGS.SILENT \DELETED + + 3. UID EXPUNGE + + Although the effect of the MOVE is the same as the preceding steps, + the semantics are not identical: The intermediate states produced by + those steps do not occur, and the response codes are different. In + particular, though the COPY and EXPUNGE response codes will be + returned, response codes for a STORE MUST NOT be generated and the + \DELETED flag MUST NOT be set for any message. + + + + + + +Gulbrandsen & Freed Standards Track [Page 3] + +RFC 6851 IMAP - MOVE Extension January 2013 + + + Because a MOVE applies to a set of messages, it might fail partway + through the set. Regardless of whether the command is successful in + moving the entire set, each individual message SHOULD either be moved + or unaffected. The server MUST leave each message in a state where + it is in at least one of the source or target mailboxes (no message + can be lost or orphaned). The server SHOULD NOT leave any message in + both mailboxes (it would be bad for a partial failure to result in a + bunch of duplicate messages). This is true even if the server + returns a tagged NO response to the command. + + Because of the similarity of MOVE to COPY, extensions that affect + COPY affect MOVE in the same way. Response codes such as TRYCREATE + (see [RFC3501], Section 6.4.7), as well as those defined by + extensions, are sent as appropriate. See Section 4 for more + information about how MOVE interacts with other IMAP extensions. + + An example: + + C: a UID MOVE 42:69 foo + S: * OK [COPYUID 432432 42:69 1202:1229] + S: * 22 EXPUNGE + S: (more expunges) + S: a OK Done + + Note that the server may send unrelated EXPUNGE responses as well, if + any happen to have been expunged at the same time; this is normal + IMAP operation. + + Implementers will need to read [RFC4315] to understand what UID + EXPUNGE does, though full implementation of [RFC4315] is not + necessary. + + Note that moving a message to the currently selected mailbox (that + is, where the source and target mailboxes are the same) is allowed + when copying the message to the currently selected mailbox is + allowed. + + The server may send EXPUNGE (or VANISHED) responses before the tagged + response, so the client cannot safely send more commands with message + sequence number arguments while the server is processing MOVE or UID + MOVE. + + Both MOVE and UID MOVE can be pipelined with other commands, but care + has to be taken. Both commands modify sequence numbers and also + allow unrelated EXPUNGE responses. The renumbering of other messages + in the source mailbox following any EXPUNGE response can be + surprising and makes it unsafe to pipeline any command that relies on + message sequence numbers after a MOVE or UID MOVE. Similarly, MOVE + + + +Gulbrandsen & Freed Standards Track [Page 4] + +RFC 6851 IMAP - MOVE Extension January 2013 + + + cannot be pipelined with a command that might cause message + renumbering. See [RFC3501], Section 5.5, for more information about + ambiguities as well as handling requirements for both clients and + servers. + +4. Interaction with Other Extensions + + This section describes how MOVE interacts with some other IMAP + extensions. + +4.1. RFC 2087, QUOTA + + The QUOTA extension (defined by [RFC2087]) may interact with MOVE on + some servers, in the sense that a MOVE command may succeed where COPY + would cause a quota overrun. + +4.2. RFC 4314, Access Control List (ACL) + + The ACL rights [RFC4314] required for MOVE and UID MOVE are the union + of the ACL rights required for UID STORE, UID COPY, and UID EXPUNGE. + +4.3. RFC 4315, UIDPLUS + + Servers supporting UIDPLUS [RFC4315] SHOULD send COPYUID in response + to a UID MOVE command. For additional information see Section 3 of + [RFC4315]. + + Servers implementing UIDPLUS are also advised to send the COPYUID + response code in an untagged OK before sending EXPUNGE or moved + responses. (Sending COPYUID in the tagged OK, as described in the + UIDPLUS specification, means that clients first receive an EXPUNGE + for a message and afterwards COPYUID for the same message. It can be + unnecessarily difficult to process that sequence usefully.) + +4.4. RFC 5162, QRESYNC + + The QRESYNC extension [RFC5162] states that the server SHOULD send + VANISHED rather than EXPUNGE in response to the UID EXPUNGE command. + The same requirement applies to MOVE, and a QRESYNC-enabled client + needs to handle both VANISHED and EXPUNGE responses to a UID MOVE + command. + + If the server is capable of storing modification sequences for the + selected mailbox, it MUST increment the per-mailbox mod-sequence if + at least one message was permanently moved due to the execution of + the MOVE/UID MOVE command. For each permanently removed message, the + server MUST remember the incremented mod-sequence and corresponding + UID. If at least one message was moved, the server MUST send the + + + +Gulbrandsen & Freed Standards Track [Page 5] + +RFC 6851 IMAP - MOVE Extension January 2013 + + + updated per-mailbox modification sequence using the HIGHESTMODSEQ + response code (defined in [RFC4551]) in the tagged or untagged OK + response. + + When one or more messages are moved to a target mailbox, if the + server is capable of storing modification sequences for the mailbox, + the server MUST generate and assign new modification sequence numbers + to the moved messages that are higher than the highest modification + sequence of the messages originally in the mailbox. + +4.5. IMAP Events in Sieve + + MOVE applies to IMAP events in Sieve [RFC6785] in the same way as + COPY does. Therefore, MOVE can cause a Sieve script to be invoked + with the imap.cause set to "COPY". Because MOVE does not cause flags + to be changed, a MOVE command will not result in a script invocation + with the imap.cause set to "FLAG". + +5. Formal Syntax + + The following syntax specification uses the Augmented Backus-Naur + Form (ABNF) notation as specified in [RFC5234]. [RFC3501] defines + the non-terminals "capability", "command-select", "sequence-set", and + "mailbox". + + Except as noted otherwise, all alphabetic characters are case + insensitive. The use of upper or lower case characters to define + token strings is for editorial clarity only. Implementations MUST + accept these strings in a case-insensitive fashion. + + capability =/ "MOVE" + + command-select =/ move + move = "MOVE" SP sequence-set SP mailbox + uid = "UID" SP (copy / fetch / search / store / move) + +6. Security Considerations + + MOVE does not introduce any new capabilities to IMAP, and this limits + the security impact. However, the transactional semantics of MOVE + may interact with specific implementations in ways that could have + unexpected consequences. For example, moving messages between + mailboxes under the quota root may require temporary suspension of + quota checking. + + An additional area of concern is interaction with antispam, + antivirus, and other security scanning and auditing mechanisms. + Different mailboxes may have different security policies that could + + + +Gulbrandsen & Freed Standards Track [Page 6] + +RFC 6851 IMAP - MOVE Extension January 2013 + + + interact with MOVE in complex ways. Scanning with updated rules may + also be required when messages are moved even when the underlying + policy has not changed. + + MOVE does relieve a problem with the base specification, since client + authors currently have to devise and implement complicated algorithms + to handle partial failures of the STORE/COPY/EXPUNGE trio. + Incomplete or improper implementation of these algorithms can lead to + mail loss. + +7. IANA Considerations + + The IANA has added MOVE to the "IMAP 4 Capabilities" registry, + . + +8. Acknowledgments + + This document is dedicated to the memory of Mark Crispin, the + inventor of the IMAP protocol, author of the IMAP protocol + specification [RFC3501], and contributor to many other email + specifications in the IETF. + + An extension like this has been proposed many times, by many people. + This document is based on several of those proposals, most recently + that by Witold Krecicki. Witold, Benoit Claise, Adrien W. de Croy, + Stephen Farrell, Bron Gondwana, Dan Karp, Christian Ketterer, Murray + Kucherawy, Jan Kundrat, Barry Leiba, Alexey Melnikov, Kathleen + Moriarty, Zoltan Ordogh, Pete Resnick, Timo Sirainen, Michael + Slusarz, and others provided valuable comments. + +9. References + +9.1. Normative References + + [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, March 1997. + + [RFC3501] Crispin, M., "INTERNET MESSAGE ACCESS PROTOCOL - VERSION + 4rev1", RFC 3501, March 2003. + + [RFC4314] Melnikov, A., "IMAP4 Access Control List (ACL) Extension", + RFC 4314, December 2005. + + [RFC4315] Crispin, M., "Internet Message Access Protocol (IMAP) - + UIDPLUS extension", RFC 4315, December 2005. + + + + + + +Gulbrandsen & Freed Standards Track [Page 7] + +RFC 6851 IMAP - MOVE Extension January 2013 + + + [RFC4551] Melnikov, A. and S. Hole, "IMAP Extension for Conditional + STORE Operation or Quick Flag Changes Resynchronization", + RFC 4551, June 2006. + + [RFC5162] Melnikov, A., Cridland, D., and C. Wilson, "IMAP4 + Extensions for Quick Mailbox Resynchronization", RFC 5162, + March 2008. + + [RFC5234] Crocker, D. and P. Overell, "Augmented BNF for Syntax + Specifications: ABNF", STD 68, RFC 5234, January 2008. + +9.2. Informative References + + [RFC2087] Myers, J., "IMAP4 QUOTA extension", RFC 2087, + January 1997. + + [RFC6785] Leiba, B., "Support for Internet Message Access Protocol + (IMAP) Events in Sieve", RFC 6785, November 2012. + +Authors' Addresses + + Arnt Gulbrandsen + Schweppermannstr. 8 + D-81671 Muenchen + Germany + + Fax: +49 89 4502 9758 + EMail: arnt@gulbrandsen.priv.no + + + Ned Freed (editor) + Oracle + 800 Royal Oaks + Monrovia, CA 91016-6347 + USA + + EMail: ned+ietf@mrochek.com + + + + + + + + + + + + + + +Gulbrandsen & Freed Standards Track [Page 8] + -- cgit