--- title: builds.sr.ht compatibility matrix --- If you have any special requests, please [send an email](mailto:~sircmpwn/sr.ht-discuss@lists.sr.ht). Only architectures supported by each Linux distribution upstream are listed, and named after the upstream port (e.g. Debian uses "amd64" while Alpine uses "x86_64"). **Note**: support for multi-arch builds is underway, but not yet available. The "native" column is checked if these builds run on native hardware for that architecture, if unchecked the builds are run on emulated hardware and may suffer from poor performance. **Support lifecycle** The support lifecycle for each build image follows the upstream support cycle. Each supported upstream release is generally offered on sr.ht, as well as the bleeding edge or development releases if applicable. No sooner than two weeks after a release becomes unsupported upstream, it will be unsupported on builds.sr.ht - and anyone who's submitted recent builds using those images will get an email warning them of the impending breakage. It's recommended that you use aliases like "alpine/latest" or "debian/testing" rather than using a specific release in your build manifests.
## Alpine Linux Maintainer: Drew DeVault
Alpine Edge image: alpine/edge
arch supported native updated
arch: aarch64
arch: armhf
arch: ppc64el
arch: s390x
arch: x86_64 (default) daily
arch: x86
Alpine 3.12 image: alpine/latest or image: alpine/3.12
arch supported native updated
arch: aarch64
arch: armhf
arch: ppc64el
arch: s390x
arch: x86_64 (default) weekly
arch: x86
Alpine 3.11 image: alpine/3.11
arch supported native updated
arch: aarch64
arch: armhf
arch: ppc64el
arch: s390x
arch: x86_64 (default) weekly
arch: x86
Alpine 3.10 image: alpine/3.10
arch supported native updated
arch: aarch64
arch: armhf
arch: ppc64el
arch: s390x
arch: x86_64 (default) weekly
arch: x86
Alpine 3.9 image: alpine/3.9
arch supported native updated
arch: aarch64
arch: armhf
arch: ppc64el
arch: s390x
arch: x86_64 (default) monthly
arch: x86
**packages** The packages array is installed with `apk add`. **repositories** To add custom apk repositories, use `repo-url key-url key-name` (separated with spaces), where `repo-url` is the URL of the package repository and `key-url` is a URL from where the signing key may be downloaded, and `key-name` is the name of the file written to `/etc/apk/keys/`. If the name of the repo is prefixed with an @, it will use that prefix in apk. Example: ```yaml repositories: sr.ht: > https://mirror.sr.ht/alpine/sr.ht/ https://mirror.sr.ht/alpine/sr.ht/alpine%40sr.ht.rsa.pub alpine@sr.ht.rsa.pub ``` ## Arch Linux Maintainer: Drew DeVault
Arch Linux image: archlinux
arch supported native updated
arch: x86_64 (default) daily
**packages** The package array is installed with `yay -Syu` (AUR packages are transparently installed). **repositories** To add custom pacman repositories, use `url#key-id`, where `url` is the URL of the package repository and `key-id` is the ID of the published PGP key the packages are signed with. ## Debian Maintainer: Drew DeVault Debian release channels are supported going back to oldstable. oldoldstable is not supported.
Debian Buster (stable) image: debian/stable or image: debian/buster
arch supported native updated
arch: arm64
arch: amd64 (default) weekly
arch: armel
arch: armhl
arch: i386
arch: mips
arch: mips64el
arch: mipsel
arch: ppc64el
arch: s390x
Debian bullseye (testing) image: debian/testing or image: debian/bullseye
arch supported native updated
arch: arm64
arch: amd64 (default) daily
arch: armel
arch: armhl
arch: i386
arch: mips
arch: mips64el
arch: mipsel
arch: ppc64el
arch: s390x
Debian Sid (unstable) image: debian/unstable or image: debian/sid
arch supported native updated
arch: arm64 (experimental) manually
arch: amd64 (default) daily
arch: armel
arch: armhl
arch: i386
arch: mips
arch: mips64el
arch: mipsel
arch: ppc64el
arch: s390x
Debian Stretch (oldstable) image: debian/oldstable or image: debian/stretch
arch supported native updated
arch: arm64
arch: amd64 (default) manually
arch: armel
arch: armhl
arch: i386
arch: mips
arch: mips64el
arch: mipsel
arch: ppc64el
arch: s390x
**packages** The packages array is installed with `apt-get install`. **repositories** To add custom repositories, specify `url distro component key-id` (separated by spaces), where `url` is the URL of the package repository, `distro` is e.g. `jessie` or `stretch`, `component` is e.g. `main` or `non-free`, and `key-id` is an optional PGP key ID to add to `apt-key`. Example: ```yaml repositories: sr.ht: https://mirror.sr.ht/debian/sr.ht/ stretch main DEADBEEFCAFEF00D ``` ## Fedora Maintainer: Timothée Floure
Fedora Rawhide image: fedora/rawhide or image: fedora/32
arch supported native updated
arch: aarch64
arch: armhfp
arch: x86_64 (default) daily
Fedora 31 image: fedora/latest or image: fedora/31
arch supported native updated
arch: aarch64
arch: armhfp
arch: x86_64 (default) weekly
Fedora 30 image: fedora/30
arch supported native updated
arch: aarch64
arch: armhfp
arch: x86_64 (default) weekly
**packages** The packages array is installed with `dnf install`. **repositories** Given the following list of repositories in your manifest: ```yml repositories: example: https://example.org ``` The following commands will be used to configure it: dnf config-manager --add-repo https://example.org dnf config-manager --set-enabled example ## FreeBSD Maintainer: Simon Ser
FreeBSD 12.x image: freebsd/latest or image: freebsd/12.x
arch supported native updated
arch: aarch64
arch: amd64 (default) monthly
arch: i386
arch: powerpc
arch: powerpc64
arch: sparc64
FreeBSD 11.x image: freebsd/11.x
arch supported native updated
arch: aarch64
arch: amd64 (default) monthly
arch: i386
arch: powerpc
arch: powerpc64
arch: sparc64
**packages** The packages array is installed with `pkg install`. **repositories** Custom package repositories are not supported on FreeBSD builds. ## NixOS Maintainer: Francesco Gazzetta
NixOS 20.03 image: nixos/latest or image: nixos/20.03
arch supported native updated
arch: aarch64
arch: armv6
arch: armv7
arch: x86_64 (default) weekly
NixOS unstable image: nixos/unstable
arch supported native updated
arch: aarch64
arch: armv6
arch: armv7
arch: x86_64 (default) daily
**packages** The packages array is installed with `nix-env -iA`. Since it's possible to specify multiple channels, you must provide the full selection path, for example `nixpkgs.hello`. Note that the `nixpkgs` channel is **not** added by default. **repositories** To add custom channels, use `repo-name: channel-url`. The repo name is relevant, since `repo-name: repo-url` will execute the commands `nix-channel --add repo-url repo-name` and `nix-channel --update repo-name`. Given the nature of nix, no channels are added by default. ## OpenBSD Maintainer: Jarkko Oranen
OpenBSD 6.7 image: openbsd/latest or image: openbsd/6.7
arch supported native updated
arch: alpha
arch: amd64 (default) as required
arch: arm64
arch: armv7
arch: hppa
arch: i386
arch: landisk
arch: loongson
arch: luna88k
arch: macppc
arch: octeon
arch: sgi
arch: sparc64
OpenBSD 6.6 image: openbsd/6.6
arch supported native updated
arch: alpha
arch: amd64 (default) as required
arch: arm64
arch: armv7
arch: hppa
arch: i386
arch: landisk
arch: loongson
arch: luna88k
arch: macppc
arch: octeon
arch: sgi
arch: sparc64
**notes** Binary patches are applied to the base system using `syspatch`. **packages** The packages array is installed with `pkg_add`. **repositories** Custom package repositories are not supported on OpenBSD builds. ## Ubuntu Maintainer: New maintainer wanted
Ubuntu Eoan (19.10) image: ubuntu/latest or image: ubuntu/eoan or image: ubuntu/19.10
arch supported native updated
arch: arm64
arch: amd64 (default) daily
arch: i386
arch: ppc64el
arch: s390x
Ubuntu Focal (20.04) image: ubuntu/lts or image: ubuntu/focal or image: ubuntu/20.04
arch supported native updated
arch: arm64
arch: amd64 (default) weekly
arch: i386
arch: ppc64el
arch: s390x
**packages** The packages array is installed with `apt-get install`. **repositories** To add custom repositories, specify `url distro component key-id` (separated by spaces), where `url` is the URL of the package repository, `distro` is e.g. `bionic` or `cosmic`, `component` is e.g. `main` or `non-free`, and `key-id` is an optional PGP key ID to add to `apt-key`. Example: ```yaml repositories: sr.ht: https://mirror.sr.ht/debian/sr.ht/ cosmic main DEADBEEFCAFEF00D ``` ## 9front Maintainer: Drew DeVault
9front "NO THINKPAD" image: 9front
arch supported native updated
arch: pc64 (default) manually
**Caveats** - Git submodules are not supported by git9 - 9front ships a dated Mercurial version which is not compatible with hg.sr.ht's wire protocol - Custom packages and custom repositories are not supported - Shell access is not supported