---
title: builds.sr.ht compatibility matrix
---
If you have any special requests, please [send an
email](mailto:~sircmpwn/sr.ht-discuss@lists.sr.ht). Only architectures supported
by each Linux distribution upstream are listed, and named after the upstream
port (e.g. Debian uses "amd64" while Alpine uses "x86_64").
**Note**: support for multi-arch builds is underway, but not yet available.
The "native" column is checked if these builds run on native hardware for that
architecture, if unchecked the builds are run on emulated hardware and may
suffer from poor performance.
**Support lifecycle**
The support lifecycle for each build image follows the upstream support cycle.
Each supported upstream release is generally offered on sr.ht, as well as the
bleeding edge or development releases if applicable. No sooner than two weeks
after a release becomes unsupported upstream, it will be unsupported on
builds.sr.ht - and anyone who's submitted recent builds using those images will
get an email warning them of the impending breakage.
It's recommended that you use aliases like "alpine/latest" or "debian/testing"
rather than using a specific release in your build manifests.
## Alpine Linux
Maintainer: Drew DeVault
Alpine Edge |
image: alpine/edge
|
arch |
supported |
native |
updated |
arch: aarch64 | | | |
arch: armhf | | | |
arch: ppc64el | | | |
arch: s390x | | | |
arch: x86_64 (default) |
✓ |
✓ |
daily |
arch: x86 | | | |
Alpine 3.11 |
image: alpine/latest or
image: alpine/3.11
|
arch |
supported |
native |
updated |
arch: aarch64 | | | |
arch: armhf | | | |
arch: ppc64el | | | |
arch: s390x | | | |
arch: x86_64 (default) |
✓ |
✓ |
weekly |
arch: x86 | | | |
Alpine 3.10 |
image: alpine/3.10
|
arch |
supported |
native |
updated |
arch: aarch64 | | | |
arch: armhf | | | |
arch: ppc64el | | | |
arch: s390x | | | |
arch: x86_64 (default) |
✓ |
✓ |
weekly |
arch: x86 | | | |
Alpine 3.9 |
image: alpine/3.9
|
arch |
supported |
native |
updated |
arch: aarch64 | | | |
arch: armhf | | | |
arch: ppc64el | | | |
arch: s390x | | | |
arch: x86_64 (default) |
✓ |
✓ |
monthly |
arch: x86 | | | |
**packages**
The packages array is installed with `apk add`.
**repositories**
To add custom apk repositories, use `repo-url key-url key-name` (separated with
spaces), where `repo-url` is the URL of the package repository and `key-url` is
a URL from where the signing key may be downloaded, and `key-name` is the name
of the file written to `/etc/apk/keys/`. If the name of the repo is prefixed
with an @, it will use that prefix in apk.
Example:
```yaml
repositories:
sr.ht: >
https://mirror.sr.ht/alpine/sr.ht/
https://mirror.sr.ht/alpine/sr.ht/alpine%40sr.ht.rsa.pub
alpine@sr.ht.rsa.pub
```
## Arch Linux
Maintainer: Drew DeVault
Arch Linux |
image: archlinux
|
arch |
supported |
native |
updated |
arch: x86_64 (default) |
✓ |
✓ |
daily |
**packages**
The package array is installed with `yay -Syu` (AUR packages are transparently
installed).
**repositories**
To add custom pacman repositories, use `url#key-id`, where `url` is the URL of
the package repository and `key-id` is the ID of the published PGP key the
packages are signed with.
## Debian
Maintainer: Drew DeVault
Debian release channels are supported going back to oldstable. oldoldstable is
not supported.
Debian Buster (stable) |
image: debian/stable or
image: debian/buster
|
arch |
supported |
native |
updated |
arch: arm64 | | | |
arch: amd64 (default) |
✓ |
✓ |
weekly |
arch: armel | | | |
arch: armhl | | | |
arch: i386 | | | |
arch: mips | | | |
arch: mips64el | | | |
arch: mipsel | | | |
arch: ppc64el | | | |
arch: s390x | | | |
Debian bullseye (testing) |
image: debian/testing or
image: debian/bullseye
|
arch |
supported |
native |
updated |
arch: arm64 | | | |
arch: amd64 (default) |
✓ |
✓ |
daily |
arch: armel | | | |
arch: armhl | | | |
arch: i386 | | | |
arch: mips | | | |
arch: mips64el | | | |
arch: mipsel | | | |
arch: ppc64el | | | |
arch: s390x | | | |
Debian Sid (unstable) |
image: debian/unstable or
image: debian/sid
|
arch |
supported |
native |
updated |
arch: arm64 (experimental) |
✓ |
✗ |
manually |
arch: amd64 (default) |
✓ |
✓ |
daily |
arch: armel | | | |
arch: armhl | | | |
arch: i386 | | | |
arch: mips | | | |
arch: mips64el | | | |
arch: mipsel | | | |
arch: ppc64el | | | |
arch: s390x | | | |
Debian Stretch (oldstable) |
image: debian/oldstable or
image: debian/stretch
|
arch |
supported |
native |
updated |
arch: arm64 | | | |
arch: amd64 (default) |
✓ |
✓ |
manually |
arch: armel | | | |
arch: armhl | | | |
arch: i386 | | | |
arch: mips | | | |
arch: mips64el | | | |
arch: mipsel | | | |
arch: ppc64el | | | |
arch: s390x | | | |
**packages**
The packages array is installed with `apt-get install`.
**repositories**
To add custom repositories, specify `url distro component key-id` (separated by
spaces), where `url` is the URL of the package repository, `distro` is e.g.
`jessie` or `stretch`, `component` is e.g. `main` or `non-free`, and `key-id` is
an optional PGP key ID to add to `apt-key`. Example:
```yaml
repositories:
sr.ht: https://mirror.sr.ht/debian/sr.ht/ stretch main DEADBEEFCAFEF00D
```
## Fedora
Maintainer: Timothée Floure
Fedora Rawhide |
image: fedora/rawhide or
image: fedora/32
|
arch |
supported |
native |
updated |
arch: aarch64 | | | |
arch: armhfp | | | |
arch: x86_64 (default) |
✓ |
✓ |
daily |
Fedora 31 |
image: fedora/latest or
image: fedora/31
|
arch |
supported |
native |
updated |
arch: aarch64 | | | |
arch: armhfp | | | |
arch: x86_64 (default) |
✓ |
✓ |
weekly |
Fedora 30 |
image: fedora/30
|
arch |
supported |
native |
updated |
arch: aarch64 | | | |
arch: armhfp | | | |
arch: x86_64 (default) |
✓ |
✓ |
weekly |
**packages**
The packages array is installed with `dnf install`.
**repositories**
Given the following list of repositories in your manifest:
```yml
repositories:
example: https://example.org
```
The following commands will be used to configure it:
dnf config-manager --add-repo https://example.org
dnf config-manager --set-enabled example
## FreeBSD
Maintainer: Simon Ser
FreeBSD 12.x |
image: freebsd/latest or
image: freebsd/12.x
|
arch |
supported |
native |
updated |
arch: aarch64 | | | |
arch: amd64 (default) |
✓ |
✓ |
monthly |
arch: i386 | | | |
arch: powerpc | | | |
arch: powerpc64 | | | |
arch: sparc64 | | | |
FreeBSD 11.x |
image: freebsd/11.x
|
arch |
supported |
native |
updated |
arch: aarch64 | | | |
arch: amd64 (default) |
✓ |
✓ |
monthly |
arch: i386 | | | |
arch: powerpc | | | |
arch: powerpc64 | | | |
arch: sparc64 | | | |
FreeBSD CURRENT |
image: freebsd/current
|
arch |
supported |
native |
updated |
arch: aarch64 | | | |
arch: amd64 (default) |
✓ |
✓ |
weekly |
arch: i386 | | | |
arch: powerpc | | | |
arch: powerpc64 | | | |
arch: sparc64 | | | |
**packages**
The packages array is installed with `pkg install`.
**repositories**
Custom package repositories are not supported on FreeBSD builds.
## NixOS
Maintainer: Francesco Gazzetta
NixOS 19.09 |
image: nixos/latest or
image: nixos/19.09
|
arch |
supported |
native |
updated |
arch: aarch64 | | | |
arch: armv6 | | | |
arch: armv7 | | | |
arch: x86_64 (default) |
✓ |
✓ |
weekly |
NixOS unstable |
image: nixos/unstable
|
arch |
supported |
native |
updated |
arch: aarch64 | | | |
arch: armv6 | | | |
arch: armv7 | | | |
arch: x86_64 (default) |
✓ |
✓ |
daily |
**packages**
The packages array is installed with `nix-env -iA`. Since it's possible to
specify multiple channels, you must provide the full selection path, for example
`nixpkgs.hello`. Note that the `nixpkgs` channel is **not** added by default.
**repositories**
To add custom channels, use `repo-name: channel-url`. The repo name is relevant,
since `repo-name: repo-url` will execute the commands `nix-channel --add
repo-url repo-name` and `nix-channel --update repo-name`. Given the nature of
nix, no channels are added by default.
## OpenBSD
Maintainer: Jarkko Oranen
OpenBSD 6.6 |
image: openbsd/latest or
image: openbsd/6.6
|
arch |
supported |
native |
updated |
arch: alpha | | | |
arch: amd64 (default) |
✓ |
✓ |
as required |
arch: arm64 | | | |
arch: armv7 | | | |
arch: hppa | | | |
arch: i386 | | | |
arch: landisk | | | |
arch: loongson | | | |
arch: luna88k | | | |
arch: macppc | | | |
arch: octeon | | | |
arch: sgi | | | |
arch: sparc64 | | | |
OpenBSD 6.5 |
image: openbsd/6.5
|
arch |
supported |
native |
updated |
arch: alpha | | | |
arch: amd64 (default) |
✓ |
✓ |
as required |
arch: arm64 | | | |
arch: armv7 | | | |
arch: hppa | | | |
arch: i386 | | | |
arch: landisk | | | |
arch: loongson | | | |
arch: luna88k | | | |
arch: macppc | | | |
arch: octeon | | | |
arch: sgi | | | |
arch: sparc64 | | | |
**notes**
Binary patches are applied to the base system using `syspatch`.
**packages**
The packages array is installed with `pkg_add`.
**repositories**
Custom package repositories are not supported on OpenBSD builds.
## Ubuntu
Maintainer: New maintainer wanted
Ubuntu Eoan (19.10) |
image: ubuntu/latest or
image: ubuntu/eoan or
image: ubuntu/19.10
|
arch |
supported |
native |
updated |
arch: arm64 | | | |
arch: amd64 (default) |
✓ |
✓ |
daily |
arch: i386 | | | |
arch: ppc64el | | | |
arch: s390x | | | |
Ubuntu Bionic (18.04) |
image: ubuntu/lts or
image: ubuntu/bionic or
image: ubuntu/18.04
|
arch |
supported |
native |
updated |
arch: arm64 | | | |
arch: amd64 (default) |
✓ |
✓ |
weekly |
arch: i386 | | | |
arch: ppc64el | | | |
arch: s390x | | | |
**packages**
The packages array is installed with `apt-get install`.
**repositories**
To add custom repositories, specify `url distro component key-id` (separated by
spaces), where `url` is the URL of the package repository, `distro` is e.g.
`bionic` or `cosmic`, `component` is e.g. `main` or `non-free`, and `key-id` is
an optional PGP key ID to add to `apt-key`. Example:
```yaml
repositories:
sr.ht: https://mirror.sr.ht/debian/sr.ht/ cosmic main DEADBEEFCAFEF00D
```