Just a plain rename, so far.

2 files changed, 29 insertions, 32 deletions

diff --git a/README.md b/README.md
index 41f4bdf..9e9e133 100644
--- a/README.md
+++ b/README.md
@@ -1,53 +1,50 @@
-# pinentry-wsl-ps1
+# pinentry-rofi
 
-GUI for GPG within Windows WSL for passwords, pins, etc.  
-Optional persistence of passwords into Windows Credential Manager
+GUI for GPG using [rofi](https://github.com/lbonn/rofi) for passwords, pins, etc.
+Optional persistence of passwords into ??? (pass(1)???)
 
-(c) 2018 Dale Phurrough  
+(c) 2018 Dale Phurrough
 Licensed under the Mozilla Public License 2.0
+(c) 2023 Matěj Cepl
+Port to Linux/rofi
 
 ## Features
 
 * Allows GnuPG to prompt and read passphrases by the pinentry protocol
-  with a GUI when running within WSL (Windows Subsystem for Linux)
+  with a GUI when running on Linux
 * Works for all keys managed by gpg-agent (GPG, SSH, etc)
 * Drop-in replacement GUI to pinentry-curses, pinentry-gtk-2, etc.
-* Works well with [WSLgit](https://github.com/andy-5/wslgit). Enables your Git and GPG configuration/processing in WSL while access/using it from Windows apps like VS Code. Easy-breezy GPG signing of Git commits. 🙂📝
 
 ## Requirements
 
-* Windows 10 Fall Creators Update (build 16299) or newer. You can check the version by `winver.exe`
-* WSL with Ubuntu 16.04 or newer. You can check the release version by `cat /etc/lsb-release`
+* rofi (tested with the Wayland branch 1.7.5+wayland2+git.1690115482.ff2338c)
 * GPG v2.1.11 or later. Earlier versions of 2.x (aka GPG2) or 1.x (aka GPG) have not been tested and are not recommended. You can check the version by `gpg2 --version`
 
 ## Setup
 
-1. Save the `pinentry-wsl-ps1.sh` script and set its permissions to be readable and executable, e.g.  
-   `chmod ug=rx pinentry-wsl-ps1.sh`
+1. Save the `pinentry-rofi.sh` script and set its permissions to be readable and executable, e.g.
+   `chmod ug=rx pinentry-rofi.sh`
 2. Configure gpg-agent to use this script for pinentry using
-   one of the following methods  
-    1. Set pinentry-program within ~/.gnupg/gpg-agent.conf to the script's path, e.g.  
-     `pinentry-program /mnt/c/repos/pinentry-wsl-ps1/pinentry-wsl-ps1.sh`
-    2. Or, set the path to this script when you launch gpg-agent, e.g.  
-     `gpg-agent --pinentry-program /mnt/c/repos/pinentry-wsl-ps1/pinentry-wsl-ps1.sh`
-3. Optionally _enable_ persistence of passwords.  
-    1. Follow instructions <https://github.com/davotronic5000/PowerShell_Credential_Manager>
-   to install the needed module from the Powershell Gallery or GitHub.
-    2. Note security perspectives like <https://security.stackexchange.com/questions/119765/how-secure-is-the-windows-credential-manager>
-    3. Edit the script and near the beginning of the file set `PERSISTENCE` to one of the values:
-        * `""` no persistence
-        * `"Session"` persists the password only for the current Windows login session
-        * `"LocalMachine"` persists the password for the current Windows login on the local Windows computer
-        * `"Enterprise"` persists the password for the current Windows login and requests Windows Credential Manager to synchronize it across Windows computers for that same Windows login
-4. Optionally _disable_ toast notification of password retrieval from Credential Manager. By default, this code notifies you with a toast notification every time gpg-agent retrieves a password from the Windows Credential Manager. Gpg-agent caches passwords by default (see gpg-agent settings like [`max-cache-ttl`](https://gnupg.org/documentation/manuals/gnupg/Agent-Options.html#Agent-Options)) so you may not see the notification with every usage.
-    * Disable: edit the script, near the top, set `NOTIFY` to the value `"0"`
-    * Enable: edit the script, near the top, set `NOTIFY` to the value `"1"`
+   one of the following methods
+    1. Set pinentry-program within ~/.gnupg/gpg-agent.conf to the script's path, e.g.
+     `pinentry-program /mnt/c/repos/pinentry-rofi/pinentry-rofi.sh`
+    2. Or, set the path to this script when you launch gpg-agent, e.g.
+     `gpg-agent --pinentry-program /mnt/c/repos/pinentry-rofi/pinentry-rofi.sh`
+[comment]: # 3. Optionally _enable_ persistence of passwords.
+[comment]: #     1. Follow instructions <https://github.com/davotronic5000/PowerShell_Credential_Manager>
+[comment]: #    to install the needed module from the Powershell Gallery or GitHub.
+[comment]: #     2. Note security perspectives like <https://security.stackexchange.com/questions/119765/how-secure-is-the-windows-credential-manager>
+[comment]: #     3. Edit the script and near the beginning of the file set `PERSISTENCE` to one of the values:
+[comment]: #         * `""` no persistence
+[comment]: #         * `"Session"` persists the password only for the current Windows login session
+[comment]: #         * `"LocalMachine"` persists the password for the current Windows login on the local Windows computer
+[comment]: #         * `"Enterprise"` persists the password for the current Windows login and requests Windows Credential Manager to synchronize it across Windows computers for that same Windows login
 
 
 ## Troubleshooting Ideas
 
 1. Run `gpg2 --version` and `gpg-agent --version`. If you don't have version 2.1.11 or newer for both versions, you may have unknown problems.
-2. I recommend you have a fully working GPG2 and GPG-agent setup using the default GPG2 configuration. Try two tests.  If these both don't work, you first need to troubleshoot your install.  
+2. I recommend you have a fully working GPG2 and GPG-agent setup using the default GPG2 configuration. Try two tests.  If these both don't work, you first need to troubleshoot your install.
     1. `gpg2 --clearsign myfile.zip`. Your entire console window should clear and present you an isolated password entry field in a crudely drawn box. Type in your key's password and it should return to your normal console with no error. You should now have the newly signed `myfile.zip.asc` file.
     2. If you are using the SSH-compatibility feature of GPG-agent, ensure you are not running `ssh-agent`. Try `ssh-add ...` to add your SSH key for your favorite host. Then remove and stash in a protected location this ssh key file from your `~/.ssh` directory to ensure ssh isn't using that file instead of the agent. Now try to ssh to this host. It should automatically retrieve the private host key from gpg-agent.
 3. I discovered that there are many ways for gpg-agent to be started silently. The options passed to it are inconsistent across the methods (and across gpg versions). On my computer, I explicitly start gpg-agent.  Below is the method I use in my `.profile`. Please be aware that `.profile` is not always run for all *nix shell scenarios and `.bashrc` may be better for your setup. The details on this are written in the [BASH man page](https://linux.die.net/man/1/bash) in the INVOCATION section.
@@ -57,7 +54,7 @@ Licensed under the Mozilla Public License 2.0
     ```crmsh
     debug 1024
     debug-pinentry
-    log-file /home/username/agent.log 
+    log-file /home/username/agent.log
     ```
 7. Enable a log file specific to this pinentry code. Edit the script, near the top, set `DEBUGLOG` to a file path, e.g. `"$HOME/pintrace.log"`. Your user must have permission to write to this file path. Restart gpg-agent after you save this configuration.
 
@@ -73,13 +70,13 @@ if [ -z "$(pgrep gpg-agent)" ]; then
     # I use the above method because the following method
     # doesn't set GPG_AGENT_INFO or GPG_TTY and has a bug
     # setting SSH_AUTH_SOCK if you use socket redirection:
-    #   eval $(gpg-agent --homedir $HOME/.gnupg --daemon) 
+    #   eval $(gpg-agent --homedir $HOME/.gnupg --daemon)
 fi
 if [ -z "$(pgrep dirmngr)" ]; then
     dirmngr --homedir $HOME/.gnupg --daemon >/dev/null 2>&1
     # I use the above method to consistently set vars in .bashrc
     # rather than the following:
-    #   eval $(dirmngr --homedir $HOME/.gnupg --daemon) 
+    #   eval $(dirmngr --homedir $HOME/.gnupg --daemon)
 fi
 ```
 
@@ -106,7 +103,7 @@ unset PIDFOUND
 ```
 enable-ssh-support
 disable-scdaemon
-pinentry-program /mnt/c/repos/pinentry-wsl-ps1/pinentry-wsl-ps1.sh
+pinentry-program /mnt/c/repos/pinentry-rofi/pinentry-rofi.sh
 ```
 
 ## References
diff --git a/pinentry-wsl-ps1.sh b/pinentry-rofi.sh
index 2f0e447..2f0e447 100644
--- a/pinentry-wsl-ps1.sh
+++ b/pinentry-rofi.sh