aboutsummaryrefslogtreecommitdiffstats
path: root/worker
Commit message (Collapse)AuthorAgeFilesLines
* model: change flags array to bitmaskRobin Jarry2023-01-0417-107/+70
| | | | | | | Using a list of integers is not optimal. Use a bit mask instead. Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* maildir: send MessagesDeleted to UI when moving messagesTim Culverhouse2022-12-141-0/+4
| | | | | | | | | | | | | | The maildir worker sends a MessagesMoved message to the UI when messages are moved, enabling the destination directory to update it's counts. The filesystem watcher sees the move and updates the directory currently selected. However, an update of the UIDs in the msgstore is not completed as it is in other workers. All other works, via some mechanism (direct or EXPUNGE update) issue a MessagesDeleted message after a move. Send this message to the UI for the maildir worker to have it work as all other workers do. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Tested-by: Bence Ferdinandy <bence@ferdinandy.com>
* imap: use list-status for check-mailTim Culverhouse2022-12-021-24/+43
| | | | | | | | | Use list-status to perform check-mail commands, if it is available. This provides a significant performance benefit by only requiring one IMAP command vs one command for each mailbox. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* imap: use list-status for list-directories if availableTim Culverhouse2022-12-021-8/+48
| | | | | | | | | Use the LIST-STATUS extension when listing directories. This enables the UI to show message counts for every mailbox, in a similar behavior to the maildir and notmuch backends. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* imap: check for list-status capabilityTim Culverhouse2022-12-021-3/+16
| | | | | | | | | | | | | Check for LIST-STATUS capability on IMAP servers. This will be used in subsequent commits for improved check-mail performance. The LIST-STATUS command allows the LIST command to also return STATUS responses, which include message counts. Upgrade go-imap to latest release. Add go-imap-liststatus extension. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* imap: add LIST-STATUS extensionTim Culverhouse2022-12-021-0/+149
| | | | | | | | Add IMAP extension LIST-STATUS handling to IMAP worker. Reference: https://www.rfc-editor.org/rfc/rfc5819.html Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* imap: simplify error handling in list directoriesTim Culverhouse2022-12-021-5/+6
| | | | | | | | Simplify the error handling in ListDirectories so the Done message is not within an else statement Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* notmuch: preserve tags when moving messagesinwit2022-12-021-2/+14
| | | | | | | | Keep the original tags when a message is moved from one maildir folder to another. Signed-off-by: inwit <inwit@sindominio.net> Acked-by: Robin Jarry <robin@jarry.cc>
* notmuch: allow moving single file messagesinwit2022-12-021-9/+14
| | | | | | | | | | | | In notmuch, a message can be represented by several identical files across the maildir structure, which makes the operation of moving a message from a virtual folder (showing a notmuch query) to a maildir folder problematic if the number of files for that message is greater than 1. Since the move operation is unambiguous when the message is represented by a single file, allow moving messages in such cases. Signed-off-by: inwit <inwit@sindominio.net> Acked-by: Robin Jarry <robin@jarry.cc>
* daterange: support relative termsKoni Marti2022-12-022-5/+455
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support relative terms when writing date ranges in the search and filter commands with the -d flag. Syntax is inspired by the notmuch search terms. Terms can be written with spaces or underscores for a better readability, so both "this_week" and "this week" are allowed. Terms are not case-sensitive. Some terms can be prefixed with either "this" or "last" where applicable ("this" is assumed by default if omitted): - "today", "yesterday" - ("this"|"last") "year", "month", "week" - all weekdays (e.g. "Tuesday", "last_wed") - all months (e.g. "January", "last_feb") Note that "month" should always be spelled out to prevent a possible ambiguity with "Monday". Weekdays and months do not need to be written out completely, i.e. "February..March" and "Feb..Mar" are both understood. Relative date terms can be used with the <N (year|month|week|day)> syntax where N is a positive integer indicating the number of time units in the past from today. The units can be abbreviated with a single letter, e.g. "1w 1d.." is the same as "1 week 1 day..". More examples: :filter -d yesterday :filter -d last_monday.. :filter -d mon..sat :filter -d 1y1m1w1d.. :search -d this_week "PATCH aerc" Signed-off-by: Koni Marti <koni.marti@gmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
* imap: filter and search with a date rangeKoni Marti2022-12-021-1/+15
| | | | | | | Filter and search with a date range in the imap backend. Signed-off-by: Koni Marti <koni.marti@gmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
* maildir: filter and search with a date rangeKoni Marti2022-12-021-6/+38
| | | | | | | Filter and search with a date range in the maildir backend. Signed-off-by: Koni Marti <koni.marti@gmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
* search: handle date ranges in search/filter queryKoni Marti2022-12-023-4/+156
| | | | | | | | | | | | | | | | | Handle date ranges in the filter and search commands for searching and filtering based on the Date: header. Implement a flag (-d) that accepts a date range <start[..end]> where the start date is included in the range but the end date is not, i.e. [start,end). The start or end date can be omitted: "start", "start..", "..end", or "start..end" are all valid inputs. An example filter query would look like this: :filter -d 2022-11-09.. The dates should be in the YYYY-MM-DD format. Signed-off-by: Koni Marti <koni.marti@gmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
* logging: rename package to logRobin Jarry2022-12-0219-168/+168
| | | | | | | | | | Use the same name than the builtin "log" package. That way, we do not risk logging in the wrong place. Suggested-by: Tim Culverhouse <tim@timculverhouse.com> Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Bence Ferdinandy <bence@ferdinandy.com> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* logging: homogenize levelsRobin Jarry2022-12-0213-45/+47
| | | | | | | | | | | | | | | | | | The main goal is to ensure that by default, the log file (if configured) does not grow out of proportions. Most of the logging messages in aerc are actually for debugging and/or trace purposes. Define clear rules for logging levels. Enforce these rules everywhere. After this patch, here is what the log file looks like after starting up with a single account: INFO 2022/11/24 20:26:16.147164 aerc.go:176: Starting up version 0.13.0-100-g683981479c60 (go1.18.7 amd64 linux) INFO 2022/11/24 20:26:17.546448 account.go:254: [work] connected. Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Bence Ferdinandy <bence@ferdinandy.com> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* imap: fix error with empty flag updatesRobin Jarry2022-11-231-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following error occurring when fetching new headers after IDLE: panic: runtime error: invalid memory address or nil pointer dereference bufio.(*Reader).fill(0xc00029af00) bufio/bufio.go:106 +0xd8 bufio.(*Reader).Peek(0xc0006e1f00, 0x1) bufio/bufio.go:144 +0x5d github.com/emersion/go-message/textproto.ReadHeader(0x0?) github.com/emersion/go-message@v0.15.0/textproto/header.go:525 +0x5f git.sr.ht/~rjarry/aerc/worker/imap.(*IMAPWorker).handleFetchMessageHeaders.func1(0xc00026e980) git.sr.ht/~rjarry/aerc/worker/imap/fetch.go:49 +0x1ab git.sr.ht/~rjarry/aerc/worker/imap.(*IMAPWorker).handleFetchMessages.func1() git.sr.ht/~rjarry/aerc/worker/imap/fetch.go:222 +0xa2 created by git.sr.ht/~rjarry/aerc/worker/imap.(*IMAPWorker).handleFetchMessages git.sr.ht/~rjarry/aerc/worker/imap/fetch.go:217 +0x10a Some IMAP messages only contain flag updates, ignore them. Reuse the same logic than handleFetchMessageBodyPart() and handleFechFullMessages(). Fixes: https://todo.sr.ht/~rjarry/aerc/111 Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: normen <normenweb@mac.com>
* maildir: fallback when parsing for in-reply-to failsKoni Marti2022-11-131-4/+7
| | | | | | | | | | Fallback to just using the raw In-Reply-To header content when it cannot be properly parsed as a message-id. Fixes: ca903d422826 ("envelope: add InReplyTo field") Reported-by: Bence Ferdinandy <bence@ferdinandy.com> Signed-off-by: Koni Marti <koni.marti@gmail.com> Tested-by: Bence Ferdinandy <bence@ferdinandy.com>
* maildir: drain limit channel on parse error when sortingTim Culverhouse2022-11-091-0/+1
| | | | | | | | | | | | | | Commit 155f0c3f28a1 ("maildir/sort: get MessageInfos in parallel") added parallel parsing of maildir messages. The parsing is limitted to 2x the number of CPUs using a buffered channel. The channel is drained at the end of the parsing, however it is not drained if a parse error is encountered. With enough errors, this can lead to a deadlock. Drain the channel when an error occurs. Fixes: 155f0c3f28a1 ("maildir/sort: get MessageInfos in parallel") Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* maildir: always sort by at least uidTim Culverhouse2022-11-091-1/+7
| | | | | | | | | | | | | | | | | | | | Commit 29205fdd07c0 ("maildir/search: get MessageInfos in parallel") introduced parallel searching of maildir backends, which improves search and filtering performance. When no filter is specified, the search algorithm is still used with no criteria because the FilterCriteria field always contains "filter" as a minimum. With the new parallelized search, the message order becomes random. Only use the search algorithm if there is a filter specified. If a filter *is* specified and a sort order is *not*, the messages will go through the search algorithm and become randomized, but not sorted back in order. Always default to a UID order sort (the same as prior to this commit) when no sort order is specified. Fixes: 29205fdd07c0 ("maildir/search: get MessageInfos in parallel") Reported-by: Ben Lee-Cohen <bdc@fastmail.fm> Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Tested-by: Ben Lee-Cohen <bdc@fastmail.fm>
* maildir: enable backend threadsTim Culverhouse2022-11-091-1/+85
| | | | | | | | | | Add thread capability to maildir backend. Enables the maildir worker to thread the entire folder, as opposed to only the displayed messages via client side threads. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Tested-by: Inwit <inwit@sindominio.net> Acked-by: Robin Jarry <robin@jarry.cc>
* message-info: add explicit References fieldTim Culverhouse2022-11-093-0/+13
| | | | | | | | | | Add an explicit References field to message info. This is useful for storing information needed for threading without storing all of the header values, keeping system RAM usage lower. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Tested-by: Inwit <inwit@sindominio.net> Acked-by: Robin Jarry <robin@jarry.cc>
* envelope: add InReplyTo fieldTim Culverhouse2022-11-092-5/+14
| | | | | | | | | | A standard IMAP envelope response includes the In-Reply-To header field. Add this field to the aerc model of Envelope. Update envelope parser to set this value. Update imap worker to set this value. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Tested-by: Inwit <inwit@sindominio.net> Acked-by: Robin Jarry <robin@jarry.cc>
* imap: add support for ORDEREDSUBJECT threading algorithmjp392022-11-092-5/+11
| | | | | | | | | | | | The imap worker incorrectly tries to use the REFERENCES threading algorithm by default although some servers only support the ORDEREDSUBJECT threading algorithm. Use whichever threading algorithm is advertised as supported by the server, buf prefer REFERENCES if available. Signed-off-by: jp39 <jp39@gmx.com> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* maildir: speedup move to larger foldersBence Ferdinandy2022-11-091-7/+4
| | | | | | | | | | When moving or archiving to a very large folder, aerc requests directory info, which can takes several seconds to receive. Also, when moving, we post a MessagesDeleted message. Remove unnecessary call to directory info and change posted message to the correct MessagesMoved. Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* notmuch: correct a typo in error messageinwit2022-11-091-1/+1
| | | | | Signed-off-by: inwit <inwit@sindominio.net> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* notmuch: allow whitespace before '=' in query-mapinwit2022-11-091-2/+2
| | | | | | | | | When reading the query-map file, any white spaces before the '=' were read as part of the query name. Trim any leading and trailing white space from the query name. Signed-off-by: inwit <inwit@sindominio.net> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* maildir: keep less data in memory for sortingTim Culverhouse2022-11-063-1/+67
| | | | | | | | | | | | | | | | Sorting opens and reads portions of every file within a directory in order to gather the data needed. Specifically, RFC822Headers and BodyStructure are not needed. The RFC822Headers field stores a lot of information, and the BodyStructure field requires parsing the body of the email. Don't set these two values when parsing. Note: in my testing, this dropped sorting a 52k archive from 2.2gb of ram usage, to < 500mb Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* maildir/search: get MessageInfos in parallelTim Culverhouse2022-11-061-8/+23
| | | | | | | | Searching in the maildir worker requires reading each file in the directory. Use waitgroups and goroutines to read files in parallel. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* maildir/sort: get MessageInfos in parallelTim Culverhouse2022-11-061-6/+22
| | | | | | | | Sorting in the maildir worker requires reading each file in the directory. Use waitgroups and goroutines to read files in parallel. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* maildir: set SkipSort when checking mailTim Culverhouse2022-11-061-1/+2
| | | | | | | | | | | | | The maildir worker's check-mail command did not include the SkipSort directive in the DirectoryInfo, which would cause a fresh fetching of directory contents on the selected maiboxes. This is unneeded and resulted in every directory being sent to the msgstore and requesting a sort. Set SkipSort when checking mail to prevent extra calls to sort. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* threads: fix ordered insert of sibling nodesKoni Marti2022-11-062-4/+139
| | | | | | | | | | | | Fix the ordered insert for multiple siblings when using client-side threading. When there are more than two siblings already in the list, the third element will not be inserted in proper order. Add tests and better documention for the insert node functions. Fixes: 5eac8d60 ("thread: add method to append new node") Signed-off-by: Koni Marti <koni.marti@gmail.com> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* threadbuilder: sort siblings by sort criteriaKoni Marti2022-11-061-3/+3
| | | | | | | | | | | | | | Sort the client-side thread siblings according to the sort criteria. Activate this option by setting "sort-thread-siblings" to true in the ui section of aerc.conf. "sort-thread-siblings" is false by default and the siblings will be sorted based on their uid number. Note that this options will only work with client-side threading and when the backend supports sorting. Also, it comes with a slight performance penalty. Signed-off-by: Koni Marti <koni.marti@gmail.com> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* notmuch: move new maildir files to cur upon opening a folderJulian Pidancet2022-10-271-1/+39
| | | | | | | | | | | | | | | | | | | | | By default "notmuch new" will index files in place and won't move new files from the new/ directory to cur/ because it assumes that is the job of the email client. During normal operation, once moved by the client, the "notmuch new" command will "fix" the database by detecting file renames. This workflow is a problem because we need to move the new/ files to cur/, otherwise the maildir lib will not work properly, but at the same time we cannot afford the notmuch database to be out of sync with the location of message files on disk, because we rely on it for listing folders, displaying emails, ect... This change uses a trick that request notmuch to synchronize message tags to maildir flags, that will effectively rename new files and cause them to be moved into the cur/ directory. Signed-off-by: Julian Pidancet <julian.pidancet@oracle.com> Acked-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* notmuch: add MsgIDFromFilename method to notmuch.DBJulian Pidancet2022-10-271-0/+16
| | | | | | | | | Add a method to retrieve the message key associated with a message file path, if indexed in the database. Signed-off-by: Julian Pidancet <julian.pidancet@oracle.com> Acked-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* notmuch: fix bad copy-paste in MsgModifyTags loggingJulian Pidancet2022-10-271-1/+1
| | | | | | | | | | Print "failed to remove tag" instead of "failed to add tag" when removing tag failed. Fixes: 5ca6022d007b ("lint: ensure errors are at least logged (errcheck)") Signed-off-by: Julian Pidancet <julian.pidancet@oracle.com> Acked-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* notmuch: emit a DirectoryInfo message upon check-mail completionJulian Pidancet2022-10-271-0/+3
| | | | | | | | | Send a DirectoryInfo message when check-mail completes to re-fetch directory content in case it changed. Signed-off-by: Julian Pidancet <julian.pidancet@oracle.com> Acked-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* notmuch: simplify DirectoryInfo emitting logicJulian Pidancet2022-10-272-90/+70
| | | | | | | | | | | | | | | Refactor the code emitting DirectoryInfo messages. Reduce function call indirections by retiring gatherDirectoryInfo(), buildDirInfo() and emitDirectoryInfo(), and replacing them with getDirectoryInfo() (aligning the code with what is done in the maildir worker by the same occasion). Also merge queryFromName(), which no longer needs to be called from different places, in handleOpenDirectory(). Signed-off-by: Julian Pidancet <julian.pidancet@oracle.com> Acked-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* notmuch: make maildir store path configurableJulian Pidancet2022-10-272-31/+69
| | | | | | | | | | | | | | Add the "maildir-store" account configuration option to select the maildir store to associate with the notmuch database. This also allows the previous changes to be backward compatible since not specifying this option will make the backend behave the same as if there were no changes. Fixes: https://todo.sr.ht/~rjarry/aerc/73 Signed-off-by: Julian Pidancet <julian.pidancet@oracle.com> Acked-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* notmuch: add maildir supportJulian Pidancet2022-10-273-8/+337
| | | | | | | | | | | | | | | | | | | | | | | | | | | By associating the notmuch database with a maildir store, we can add the Copy/Move/Delete operations on messages to the notmuch backend. This change assumes that the notmuch database location is also the root of the maildir store. In a previous change, we added the ability to dynamically add and remove message files to the notmuch DB. This change uses this facility to synchronize the database with the filesystem operations on maildir files. While it's still possible to use the query-map file to create virtual folders from notmuch search queries, the sidebar is now loaded with the folders found in the maildir store. With notmuch, two identical but distinct message files can be indexed in the database with the same key. This change takes extra care of only deleting or removing message files from the maildir corresponding to the folder that is currently selected (if any). Implements: https://todo.sr.ht/~rjarry/aerc/88 Fixes: https://todo.sr.ht/~rjarry/aerc/73 Signed-off-by: Julian Pidancet <julian.pidancet@oracle.com> Acked-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* maildir: replace ListFolder method with FolderMapJulian Pidancet2022-10-272-11/+10
| | | | | | | | | | | Replace ListFolder with a new method that returns a map indexed by folder names instead of a list of folder names. A map is simpler to use and more efficient in case we only want to check the presence of a specific folder in the Maildir store. Signed-off-by: Julian Pidancet <julian.pidancet@oracle.com> Acked-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* maildir: move common maildir code out of workerJulian Pidancet2022-10-274-143/+172
| | | | | | | | | This change moves code that could be common to both notmuch and maildir workers in worker/lib. Signed-off-by: Julian Pidancet <julian.pidancet@oracle.com> Acked-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* notmuch: add IndexFile and DeleteMessage methods to notmuch.DBJulian Pidancet2022-10-271-0/+29
| | | | | | | | | The new IndexFile and DeleteMessage allow dynamically inserting and removing files to/from a notmuch database. Signed-off-by: Julian Pidancet <julian.pidancet@oracle.com> Acked-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* notmuch: add MsgFilenames method to notmuch.DBJulian Pidancet2022-10-271-0/+25
| | | | | | | | | | Multiple files on the filesystem can be referenced under a single key in the notmuch database. MsgFilenames() returns a list of filenames associated with an index key. Signed-off-by: Julian Pidancet <julian.pidancet@oracle.com> Acked-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* maildir: fix maildir folder listingJulian Pidancet2022-10-251-1/+1
| | | | | | | | | | | | | | | Previous change "maildir: hide invalid folders" prevents filepath.Walk from descending into directories that don't contain new/, tmp/ or cur/ because the WalkDirFunc returns filepath.SkipDir. We have to assume that these directories can be the parent of valid maildir folders even if they're not themselves valid maildir folders, so it is a mistake not to recurse into these subfolders. Fix it by returning nil instead of filepath.SkipDir in the WalkDirFunc. Fixes: 150aa0f498b9 ("maildir: hide invalid folders") Signed-off-by: Julian Pidancet <julian.pidancet@oracle.com> Acked-by: Robin Jarry <robin@jarry.cc>
* types: remove unused FullMessage.Info fieldRobin Jarry2022-10-251-1/+0
| | | | | | | | This field is always nil. Either we should initialize it to a proper value or remove it. Since it is unused, remove it. Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Moritz Poldrack <moritz@poldrack.dev>
* lint: check for bad white space habitsRobin Jarry2022-10-193-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A little coding hygiene cannot hurt. Add a simple awk script to check all source files for bad white space habits: - trailing white space - trailing new lines at the end of files - missing new line at the end of files - spaces followed by tabs The script outputs color when the terminal supports it. It exits with a non-zero code when there was at least one white space issue found. Call the script in the lint step. Example output of the awk script: config/default_styleset:1:# <-- trailing whitespace config/default_styleset:3:# <-- trailing whitespace doc/aerc.1.scd:78: Executes an arbitrary command in the background. Aerc will set the <-- trailing whitespace doc/aerc.1.scd:234: <-- trailing whitespace doc/aerc.1.scd:237: <-- trailing whitespace worker/types/thread_test.go:74: // return ErrSkipThread<-- space(s) followed by tab(s) worker/lib/testdata/message/invalid/hexa: trailing new line(s) Fix issues reported by the script. NB: The ENDFILE match is a GNU extension. It will be ignored on BSD-awk and trailing new lines will not be detected. The lint make target is only invoked on alpine linux which has GNU awk anyway. NB: Empty cells in scdoc tables require trailing white space... Avoid this by setting content in these cells. I don't really see a use for empty cells. Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Moritz Poldrack <moritz@poldrack.dev>
* maildir: make checkmail update directory countsBen Cohen2022-10-181-0/+14
| | | | | | | | Non-selected folders will now have their total/unread/new counts updated in the background when a check-mail happens. Signed-off-by: Ben Cohen <ben@bencohen.net> Acked-by: Robin Jarry <robin@jarry.cc>
* aerc: use single event loopTim Culverhouse2022-10-073-8/+21
| | | | | | | | | Combine tcell events with WorkerMessages to better synchronize state with IO and UI. Remove Tick loop for rendering. Use events to trigger renders. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* imap: fix flags updateKoni Marti2022-10-041-4/+4
| | | | | | | | | | | | | | | Fixes updating the flags in the imap backend. Before, the silent flag was set incorrectly by 75fc42e ("imap: send message info updates for bulk flag ops") which caused some imap servers to not send the updated flags. By disabling the silent flag, the flag update will return a corrsponding value that we can send back to the message store to update the flags correctly. Fixes: 75fc42e ("imap: send message info updates for bulk flag ops") Reported-by: Jens Grassel <jens@wegtam.com> Signed-off-by: Koni Marti <koni.marti@gmail.com> Tested-by: Jens Grassel <jens@wegtam.com> Acked-by: Robin Jarry <robin@jarry.cc>
* viewer: option to not mark message as seenKoni Marti2022-10-041-1/+4
| | | | | | | | | | | | | | | | | Add option to open a message in the message viewer without setting the seen flag. Enables the message viewer to be used as a preview pane without changing the message flags unintentionally. Before, the message viewer would set the seen flag by default. The IMAP backend will now always fetch the message body with the peek option enabled (same as we fetch the headers). An "auto-mark-read" option is added to the ui config which is set to true by default. If set the false, the seen flag is not set by the message viewer. Co-authored-by: "James Cook" <falsifian@falsifian.org> Signed-off-by: Koni Marti <koni.marti@gmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
generated by cgit (git 2.34.1) at 2024-11-15 19:16:20 +0000