| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Support the IMAP Gmail extension (X-GM-EXT-1) to fetch all messages for
a given thread. This allows client-side threading to display a full
message thread. Obviously, it requires a Gmail account to work.
The extension is only used when requested in accounts.conf with:
"use-gmail-ext = true" (default: false)
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
Tested-by: Tristan Partin <tristan@partin.io>
|
|
|
|
|
|
|
|
|
| |
Add the folder-map functionality to the imap backend. If the folder-map
config option is specified, the folder-map worker middleware is used.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a WorkerInteractor interface. Avoid exposing any public fields in
the types.Worker.
This will set the stage to implement a middleware pattern for the
workers, i.e. to map folder names between the ui and the backend.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Tested-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
| |
Use the worker's logging functions to have all imap related messages
prefixed by the account name.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Tested-by: Inwit <inwit@sindominio.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Enable partial header fetching by creating config values for headers to
specifically include, or specifically exclude. The References field will
always be fetched, regardless of the include list. Envelope data is
always fetched, but is not shown with :toggle-headers, since it isn't in
the RFC822 struct unless explicitly included in the list.
Partial headers can break the cache on changes. Update the cache tag key
to include the state of the partially-fetched headers.
Partial header fetching can have a significant performance increase for
IMAP, and for all backends a resource improvement. Some data to support
this is below. Gathered by opening aerc, selecting a mailbox with
approximately 800 messages and scrolling to the end.
Received measured with nethogs, RAM from btop
Received | RAM
-------------------------------------
All Headers | 9,656 kb | 103 MB
Minimum Headers | 896 kb | 36 MB
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
| |
To accommodate servers that use a delimiter other than "/" ("." being a
common alternative), the delimiter is fetched from the server when
connecting.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use the Backend interface to report Backend capabilities. Previously,
these were reported via a DirectoryInfo message, however they have
nothing to do with a directory and should be reported directly by the
backend. Add Capabilities method to Backend interface, satisfy this in
each backend, and use it on the UI side.
Remove Caps field from DirectoryInfo
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry<robin@jarry.cc>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Mailbox status updates received from the IMAP server do not come with
the information being sent to the UI. Use the update signal to instead
trigger a check-mail of the directory the status was sent for.
The status update comes with the following data:
- Messages in the mailbox
- Recent messages in the mailbox
- Sequence number of the first Unseen message
- Flags in the mailbox
The data we actually we want to send to the UI:
- Messages in the mailbox
- Recent messages in the mailbox
- Unseen messages in the mailbox
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Check for LIST-STATUS capability on IMAP servers. This will be used in
subsequent commits for improved check-mail performance.
The LIST-STATUS command allows the LIST command to also return STATUS
responses, which include message counts.
Upgrade go-imap to latest release. Add go-imap-liststatus extension.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
|
| |
Use the same name than the builtin "log" package. That way, we do not
risk logging in the wrong place.
Suggested-by: Tim Culverhouse <tim@timculverhouse.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Tested-by: Bence Ferdinandy <bence@ferdinandy.com>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The main goal is to ensure that by default, the log file (if configured)
does not grow out of proportions. Most of the logging messages in aerc
are actually for debugging and/or trace purposes.
Define clear rules for logging levels. Enforce these rules everywhere.
After this patch, here is what the log file looks like after starting up
with a single account:
INFO 2022/11/24 20:26:16.147164 aerc.go:176: Starting up version 0.13.0-100-g683981479c60 (go1.18.7 amd64 linux)
INFO 2022/11/24 20:26:17.546448 account.go:254: [work] connected.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Tested-by: Bence Ferdinandy <bence@ferdinandy.com>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
The imap worker incorrectly tries to use the REFERENCES threading
algorithm by default although some servers only support the
ORDEREDSUBJECT threading algorithm.
Use whichever threading algorithm is advertised as supported by the
server, buf prefer REFERENCES if available.
Signed-off-by: jp39 <jp39@gmx.com>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add XOAUTH2 authentication support for IMAP and SMTP. Although XOAUTH2
is now deprecated in favor of OAuthBearer, it is the only way to connect
to Office365 since Basic Auth is now completely removed.
Since XOAUTH2 is very similar to OAuthBearer and uses the same
configuration parameters, this is basically a copy-paste of the existing
OAuthBearer code.
However, XOAUTH2 support was removed from go-sasl library, so this
change reimports the code that was removed from go-sasl and offers it
a new home in lib/xoauth2.go. Hopefully it shouldn't be too hard to
maintain, being less than 50 SLOC.
Link: https://github.com/emersion/go-sasl/commit/7bfe0ed36a21
Implements: https://todo.sr.ht/~rjarry/aerc/78
Signed-off-by: Julian Pidancet <julian.pidancet@oracle.com>
Tested-by: Inwit <inwit@sindominio.net>
Acked-by: Tim Culverhouse <tim@timculverhouse.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Implement MoveMessages in the imap backend. go-imap includes the MOVE
Imap extension by default, and if a server does not support it the
command fallsback to a copy-and-delete operation. Servers with the MOVE
extension will see a slight performance increase when moving messages
due to fewer round trips. The IMAP implementation uses a MessagesMoved
worker message to avoid polling the destination mailbox.
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
| |
Error wrapping as introduced in Go 1.13 adds some additional logic to
use for comparing errors and adding information to it.
Signed-off-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The imap worker's seqmap is represented as a map of sequence number to
UID. This presents a problem when expunging group of messages from the
mailbox: each individual expunge decrements the sequence numbers by 1
(for every sequence number greater than the expunged). This requires a
looping around the map to update the keys. The use of a map also
requires that both the sequence number and the UID of a message be known
in order to insert it into the map. This is only discovered by fetching
individual message body parts (flags, headers, etc), leaving the seqmap
to be empty until we have fetched information about each message. In
certain instances (if a mailbox has recently been loaded), all
information is loaded in memory and no new information is fetched -
leaving the seqmap empty and the UI out of sync with the worker.
Refactor the seqmap as a slice, so that any expunge automatically
decrements the rest of the sequences.
Use the results of FetchDirectoryContents or FetchDirectoryThreaded to
initialize the seqmap with all discovered UIDs. Sort the UIDs in
ascending order: IMAP specification requires that sequence numbers start
at 1 increase in order of ascending UID.
Add individual messages to the map if they come via a MessageUpdate and
have a sequence number larger than our slice.
Update seqmap tests with new logic.
Reference: https://datatracker.ietf.org/doc/html/rfc3501#section-2.3.1.2
Fixes: https://todo.sr.ht/~rjarry/aerc/69
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Do not pass logger objects around anymore. Shuffle some messages to make
them consistent with the new logging API. Avoid using %v when a more
specific verb exists for the argument types.
The loggers are completely disabled (i.e. Sprintf is not even called)
by default. They are only enabled when redirecting stdout to a file.
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
|
|
|
|
|
|
|
|
|
|
|
| |
This patch provides a method to report backend capabilities to the UI.
The intial capabilities included in the report are Sort and Thread.
Having these available to the UI enables the client to better handle
server side threading.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Acked-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There are concurrent threads that are accessing and modifying
IMAPWorker.seqMap (the mapping of sequence numbers to message UIDs).
This can lead to crashes when trying to add and remove a message ID.
panic: runtime error: index out of range [391] with length 390
goroutine 1834 [running]:
git.sr.ht/~rjarry/aerc/logging.PanicHandler()
logging/panic-logger.go:47 +0x6de
panic({0xa41760, 0xc0019b3290})
/usr/lib/golang/src/runtime/panic.go:838 +0x207
git.sr.ht/~rjarry/aerc/worker/imap.(*IMAPWorker).handleFetchMessages.func1()
worker/imap/fetch.go:214 +0x185
created by git.sr.ht/~rjarry/aerc/worker/imap.(*IMAPWorker).handleFetchMessages
worker/imap/fetch.go:209 +0x12b
Use a map which makes more sense than a simple array for random access
operations. Also, it allows better typing for the key values. Protect
the map with a mutex. Add internal API to access the map. Add basic unit
tests to ensure that concurrent access works.
Fixes: https://todo.sr.ht/~rjarry/aerc/49
Signed-off-by: Robin Jarry <robin@jarry.cc>
Acked-by: Moritz Poldrack <moritz@poldrack.dev>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add option to cache headers for imap accounts. Cache db is located at
$XDG_CACHE_DIR/aerc/{account name}. The cache is cleaned of stale
entries when aerc is first opened.
Two new account level configuration options are introduced:
* cache-headers (Default: false)
* cache-max-age (Default: 30 days (720 hours))
The change in worker/imap/open.go is to set the selected directory. This
is required to access the UIDVALIDITY field, which is used in
combination with the message ID to form the key for use in the cache db.
The key structure is: "header.{UIDVALIDITY}.{UID}"
Where reasonable, cache does not stop aerc from running. In general, if
there is an error in the cache, aerc should continue working as usual.
Errors are either displayed to the user or logged.
All messages are stored without flags, and when retrieved have the flags
set to SEEN. This is to prevent UI flashes. A new method to
FetchMessageFlags is introduced to update flags of cached headers. This
is done asynchronously, and the user will see their messages appear and
then any flags updated. The message will initially show as SEEN, but
will update to unread. I considered updating the cache with the
last-known flag state, however it seems prudent to spare the R/W cycle
and assume that - eventually - all messages will end up read, and if it
isn't the update will occur rather quickly.
Note that leveldb puts a lock on the database, preventing multiple
instances of aerc from accessing the cache at the same time.
Much of this work is based on previous efforts by Vladimír Magyar.
Implements: https://todo.sr.ht/~rjarry/aerc/2
Thanks: Vladimír Magyar <vladimir@mgyar.me>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: inwit <inwit@sindominio.net>
Reviewed-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Check for new mail (recent, unseen, exists counts) with an external
command, or for imap with the STATUS command, at start or on
reconnection and every X time duration
IMAP:
The selected folder is skipped, per specification. Additional config
options are included for including/excluding folders explicitly.
Maildir/Notmuch:
An external command will be run in the background to check for new mail.
An optional timeout can be used with maildir/notmuch. Default is 10s
New account options:
check-mail
check-mail-cmd (maildir/notmuch only)
check-mail-timeout (maildir/notmuch only), default 10s
check-mail-include (IMAP only)
check-mail-exclude (IMAP only)
If unset, or set less than or equal to 0, check-mail will be ignored
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
Tested-by: Moritz Poldrack <moritz@poldrack.dev>
Acked-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
| |
Extract the tcp connection details and timeout the tcp connect functions
(net.ResolveTCPAddr and net.DialTCP). If timed out, ensure that the
connection is properly closed.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a debouncer to the idle mode. Avoid unnecessary idling when another
job arrives within a certain time frame.
For example, the ui sends three messages to the worker at the same time
when we open a message (FlagMessage, FetchMessageBodyPart, and the
FetchMessageHeaders). The debouncer prevents the unnecessary entering
and leaving of the idle mode between those messages.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
| |
Untangle the observer functionality from the message handling routine.
Observe the imap client's logout channel and trigger a connection error
when necessary to start the reconnect cycle.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
| |
Untangle the idle functionality from the message handling routine. Wait
for the idle mode to properly exit every time to ensure a consistent
imap state. Timeout when hanging in idle mode and inform the ui.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
| |
Extract the imap config and move the configure part out of the message
handler.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
|
| |
Check slice bounds before using it for the message and expunge updates.
Log the error but ignore the affected updates.
Link: https://lists.sr.ht/~rjarry/aerc-devel/%3CCJEHBFFUI11T.1AYGOMVGZ87ZS%40rek2system%3E
Reported-by: ReK2 <rek2@hispagatos.org>
Signed-off-by: Koni Marti <koni.marti@gmail.com>
Acked-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since panics still regularly "destroy" the terminal, it is hard to get a
stack trace for panics you do not anticipate. This commit adds a panic
handler that automatically creates a logfile inside the current working
directory.
It has to be added to every goroutine that is started and will repair
the terminal on a panic.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
| |
This commit fixes all occurrences of the abovementioned lint-error in
the codebase.
Signed-off-by: Moritz Poldrack <git@moritz.sh>
Acked-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
| |
Start the reconnect cycle when the initial connect fails. Make the
connection observer send a connection error when the imap client is nil.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
waits an increasing amount of time before attempting a reconnect.
Wait is capped at 16s. Prevents many reconnect attemps in a short time period.
Fixes commit 05ad96a30cb8 ("imap: improve reconnect stability") that
improved the reliability of the reconnect mechanism but did not
implement controls to prevent the triggering of too many reconnects
within a short period of time.
Fixes: 05ad96a30cb8 ("imap: improve reconnect stability")
Signed-off-by: Koni Marti <koni.marti@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
improves the robustness of the imap reconnect feature which was
introduced in commit beae17a6da37 ("imap: auto-reconnects on connection
error").
If a connection error is emitted, the message list is cleared and a
corresponding error message is shown in the ui. Status bar is updated as
well. Upon reconnect, the directories and the message list will be
re-fetched (same behavior as the connect command).
Reconnect can be enabled and disabled with the connect and the
disconnect commands.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
|
|
|
|
|
|
|
|
|
| |
if the worker emits a connection error, the ui will automatically send back a
reconnect command. The worker then establishes a new connection. Auto-reconnect
is disabled when the user sends the disconnect command.
Fixes: https://todo.sr.ht/~rjarry/aerc/1
Signed-off-by: Koni Marti <koni.marti@gmail.com>
|
|
|
|
|
|
|
|
| |
implements a new connection error message. This allows the worker to emit a
connection-related error message to the ui when the imap client closes the
loggedOut channel.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
| |
fixes the panic when the user sends multiple connect commands and is
already connected. The panic is caused by closing an already closed
channel. This happens when the idle re-init code is not executed, e.g.
when there's a return statement in the switch block. A defer func()
before the switch block will prevent this. The existing behavior of only
creating a new idleStop channel when properly connected is preseverd.
Signed-off-by: Koni Marti <koni.marti@gmail.com>
|
|
|
|
|
|
|
|
|
| |
This reverts commit c605ada3ddc7569ebfc153b07db12a21b30d0569.
This breaks reading message bodies. I am not sure why, I'll take some
time to fix it later.
Signed-off-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Attempt to reconnect to the server when there is an unexpected
disconnection or network error.
Use the Client.LoggedOut() channel which is closed when the connection
is closed.
This patch is rather flaky and is certainly bugged. However, it is
a start.
Signed-off-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix the following build error on mac os:
worker/imap/worker.go:368:29: undefined: syscall.TCP_KEEPCNT
worker/imap/worker.go:376:29: undefined: syscall.TCP_KEEPINTVL
These symbols are not defined on darwin.
Fixes: 5dfeff75f368 ("imap: add tcp connection options")
Signed-off-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
| |
Allow fine tuning tcp connection options.
Signed-off-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
|
| |
In preparation for tcp keepalive options, we need access to the
net.TCPConn object associated with an IMAP connection. The only way to
do this is to create the connection ourselves.
No functional change.
Signed-off-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
| |
This will prepare for extra tcp connection options support and for
automatic reconnect. No functional change.
Signed-off-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Do not set client = nil, it breaks almost all message handlers:
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x0 pc=0x8c7e51]
goroutine 25 [running]:
git.sr.ht/~rjarry/aerc/worker/imap.(*IMAPWorker).handleListDirectories
worker/imap/list.go:32
git.sr.ht/~rjarry/aerc/worker/imap.(*IMAPWorker).handleMessage
worker/imap/worker.go:174
git.sr.ht/~rjarry/aerc/worker/imap.(*IMAPWorker).Run
worker/imap/worker.go:264
created by git.sr.ht/~rjarry/aerc/widgets.NewAccountView
widgets/account.go:85 +0x518
Simply leave the disconnected client object, it already returns explicit
error messages.
Fixes: e41ed82cf3db ("imap: add manual {dis,}connect support")
Signed-off-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Display threads in the message list. For now, only supported by the
notmuch backend and on IMAP when the server supports the THREAD
extension.
Setting threading-enable=true is global and will cause the message list
to be empty with maildir:// accounts.
Co-authored-by: Kevin Kuehler <keur@xcf.berkeley.edu>
Co-authored-by: Reto Brunner <reto@labrat.space>
Signed-off-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
| |
Signed-off-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
| |
I'm not sure what are the implications but it seems required.
Link: https://github.com/golang/go/issues/20883
Signed-off-by: Robin Jarry <robin@jarry.cc>
|
|
|
|
|
|
|
| |
go-imap supports IDLE since 1.2.0. Remove dependency to go-imap-idle.
Link: https://github.com/emersion/go-imap/commit/ac3f8e195ef1b6d
Signed-off-by: Robin Jarry <robin@jarry.cc>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The `:rmdir` command removes the current directory (`-f` is required if
the directory is not empty).
This is not supported on the notmuch backend.
An issue with the maildir backend is that some sync programs (e.g.
offlineimap) may recover the directory after it is deleted. They need
to specifically be configured to accept deletions, or special commands
need to be executed (e.g. `offlineimap --delete-folder`) to properly
delete folders.
A danger of using this on the IMAP backend is that it is possible for a
new message to be added to the directory and for aerc to not show it
immediately (due to a slow connection) - using `:rmdir` at this moment
(with `-f` if the directory already contains messages) would delete the
directory and the new message that just arrived (and all other
contents). This is documented in aerc(1) so that users are aware of
possible risks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
More mail flags can now be set, unset, and toggled, not just the
read/seen flag.
This functionality is implemented with a new `:flag` and `:unflag`
command, which are extensions to the matching `:read` and `:unread`
commands, adding support for different flags. In fact, the
`read`/`unread` commands are now recognized aliases to `flag`/`unflag`.
The new commands are also well documented in aerc(1).
The change mostly extends the previous read/unread setting functionality
by adding a selection for the flag to change.
|
| |
|