aboutsummaryrefslogtreecommitdiffstats
path: root/go.sum
Commit message (Collapse)AuthorAgeFilesLines
* term: upgrade tcell-termTim Culverhouse2023-04-271-2/+2
| | | | | | | | | | Upgrade tcell-term, includes a bug fix when CUP is sent with only one param. Fixes: https://todo.sr.ht/~rjarry/aerc/170 Tested-by: ~staceeharper Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* term: fix handling of failed commandTim Culverhouse2023-04-261-2/+2
| | | | | | | | | | | | | | | | | | | | | A panic occurs when a terminal is launched with a command that fails: :term blabla The underlying terminal does not need to be closed if the command failed to start: all resources are cleaned up upon failure to start already. Don't attempt to close terminal if the command didn't start. With the above fix in place, the tab will linger around until a redraw occurs, as there is nothing queuing a redraw on this behavior. Add a QueueRedraw in the tabs.Remove method to clean up the tabbar. The issue in tcell-term that causes this panic has been address there as well, released as 0.7.1. Update aerc's version. Reported-by: Koni Marti <koni.marti@gmail.com> Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Tested-by: Koni Marti <koni.marti@gmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
* mod: update all dependenciesRobin Jarry2023-04-241-399/+73
| | | | | | | | | | | | | | Result of the following commands: go get -u -t go mod tidy -compat=1.18 I also updated gofumpt version in the makefile. golangci-lint cannot be updated to 1.52.* which requires go 1.19 or later. Aerc has a minimum required version of 1.18. Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Bence Ferdinandy <bence@ferdinandy.com>
* mod: drop support for go 1.17Robin Jarry2023-04-241-3/+0
| | | | | | | | | | | | | A lot of libraries are starting to use generics (introduced in go 1.18). Restricting aerc on 1.17 prevents us from updating our dependencies. Since 1.18 is a major milestone, it has a chance to remain supported for a while. Update the minimum go version to 1.18. Run go mod tidy -compat=1.18. Update our CI to run on 1.18. Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Bence Ferdinandy <bence@ferdinandy.com>
* tcell-term: upgrade to latest releaseTim Culverhouse2023-04-231-3/+7
| | | | | | | | | | | | | | | | | Upgrade tcell-term to latest release. This is a complete rewrite of tcell-term, and includes many minor bug fixes and overall improvements. Notably: - Improved parsing - One fewer goroutine - Improved API - Improved redraw messaging - Improved key support - Improved mouse support Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry<robin@jarry.cc>
* fswatcher: add a darwin fswatcher implementationTim Culverhouse2023-03-071-0/+2
| | | | | | | | | | Add a darwin implementation of FSWatcher using the fsevents package. The implementation is behind a darwin build flag. Co-authored-by: Ben Cohen <ben@bencohen.net> Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Tested-by: Ben Lee-Cohen <ben@lee-cohen.com> Acked-by: Robin Jarry <robin@jarry.cc>
* mod: remove support for go 1.16Robin Jarry2023-02-261-43/+4
| | | | | | | | | | | | | | | | | | | | | The dependency to x/tools@v0.6.0 drags x/sys@v0.5.0 which is not compatible with go 1.16 # golang.org/x/sys/unix golang.org/x/sys@v0.5.0/unix/syscall.go:83:16: undefined: unsafe.Slice golang.org/x/sys@v0.5.0/unix/syscall_linux.go:2271:9: undefined: unsafe.Slice golang.org/x/sys@v0.5.0/unix/syscall_unix.go:118:7: undefined: unsafe.Slice golang.org/x/sys@v0.5.0/unix/sysvshm_unix.go:33:7: undefined: unsafe.Slice note: module requires Go 1.17 Since go 1.16 is now EOL, update the minimal go version to 1.17. Update go.mod and go.sum with the following command: go mod tidy -compat=1.17 Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Moritz Poldrack <moritz@poldrack.dev>
* lint: always run golangci-lint@latestRobin Jarry2023-02-261-1069/+12
| | | | | | | | | | | | Do not store the dependency in tools.go as there may be conflicts with some indirect dependencies of aerc. Run gofumpt and golangci-lint from their latest tagged release. This should fix issues with go 1.20. Bonus, it drains a bit of fat from go.sum. Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Moritz Poldrack <moritz@poldrack.dev>
* term: update tcell-termTim Culverhouse2023-02-231-8/+8
| | | | | | | | | | | | | Update tcell-term to v0.6.0: - Fixes several leaking goroutines - Adds an EventBell, enabled aerc to know when a terminal has a BEL event - Fixes a panic on \x1b[0G Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Tested-by: Bence Ferdinandy <bence@ferdinandy.com> Acked-by: Robin Jarry <robin@jarry.cc>
* term: upgrade tcell-term to v0.4.0Tim Culverhouse2022-12-271-2/+2
| | | | | | | | | | | Upgrade tcell-term to latest tag. Has only a few fixes: - Always set TERM=xterm-256color for better compatibility - Fix some RGB parsing sequences - Fix splitting of UTF8 bytes causing render issues Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* jwz: upgrade to develop branchTim Culverhouse2022-12-021-2/+2
| | | | | | | | | | JWZ is used for client side threading, as well as maildir backend threading. A bug was fixed in the 'develop' branch to address a panic caused by some emails. Upgrade to the 'develop' branch which includes this bugfix. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Tested-by: Bence Ferdinandy <bence@ferdinandy.com>
* terminal: bump tcell-term versionTim Culverhouse2022-10-191-2/+2
| | | | | | | | | | Upgrade tcell-term to v0.3.0. - Fixes erase line handling - Wide character support Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* terminal: fix race conditions on access to cmdTim Culverhouse2022-10-021-2/+2
| | | | | | | | | | | | | | | | Upgrade tcell-term to v0.2.0 Use Start method from tcell-term. This prevents aerc from needing to wait until the command has started to continue. The tcell-term start method blocks until the command is started, similar to cmd.Start. By doing so, we prevent a race condition between aerc and tcell-term on access to cmd.Process. Remove cleanup of cmd, this is all already handled by tcell-term when Close is called. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* terminal: bump tcell-term versionTim Culverhouse2022-09-251-2/+2
| | | | | | | | Bump tcell-term version to latest commit. Intention is to release tcell-term v0.2.0 just before aerc 0.13.0. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* term: replace go-libvterm with tcell-termTim Culverhouse2022-09-141-6/+3
| | | | | | | | | | | | | | | | Replace go-libvterm package with tcell-term. go-libvterm provides the embedded terminal for aerc. It uses a statically linked C library, requiring CGO. tcell-term is written in pure go and is written to be portable with tcell applications by implementing the tcell Widget interface. This allows the terminal to take a view (which aerc already supplies) and draw directly to it, as well as issue tcell Events to a Watcher. Enable setting cursor shapes in embedded terminals. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Signed-off-by: Robin Jarry <robin@jarry.cc>
* ui: export context.viewport, screen.show, add SetCursorStyleTim Culverhouse2022-09-141-8/+12
| | | | | | | | | | Export context.viewport for use in implementing tcell-term. Bump tcell version to enable SetCursorStyle feature. Add this function to the ui for future use with tcell-term. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* go mod tidyRobin Jarry2022-09-141-39/+48
| | | | Signed-off-by: Robin Jarry <robin@jarry.cc>
* lint: update linter versionMoritz Poldrack2022-09-141-0/+3
| | | | | Signed-off-by: Moritz Poldrack <git@moritz.sh> Acked-by: Robin Jarry <robin@jarry.cc>
* lint: add golangci-lint to the lintersMoritz Poldrack2022-08-041-24/+1109
| | | | | | | | go vet has been removed from the lint step as it is run by the new linter. Signed-off-by: Moritz Poldrack <moritz@poldrack.dev> Acked-by: Robin Jarry <robin@jarry.cc>
* lint: use gofumpt instead of gofmtMoritz Poldrack2022-08-011-3/+25
| | | | | | Link: https://github.com/mvdan/gofumpt Signed-off-by: Moritz Poldrack <git@moritz.sh> Acked-by: Robin Jarry <robin@jarry.cc>
* mbox: implement an mbox backend workerKoni Marti2022-07-141-4/+17
| | | | | | | | | | | | | | | | | | | | | | | | | Implement an mbox backend worker. Worker can be used for testing and development by mocking a backend for the message store. Worker does not modify the actual mbox file on disk; all operations are performed in memory. To use the mbox backend, create an mbox account in the accounts.conf where the source uses the "mbox://" scheme, such as source = mbox://~/mbox/ or source = mbox://~/mbox/file.mbox If the mbox source points to a directory, all files in this directory with the .mbox suffix will be opened as folders. If an outgoing smtp server is defined for the mbox account, replies can be sent to emails that are stored in the mbox file. Signed-off-by: Koni Marti <koni.marti@gmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
* imap: add option to cache headersTim Culverhouse2022-06-221-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add option to cache headers for imap accounts. Cache db is located at $XDG_CACHE_DIR/aerc/{account name}. The cache is cleaned of stale entries when aerc is first opened. Two new account level configuration options are introduced: * cache-headers (Default: false) * cache-max-age (Default: 30 days (720 hours)) The change in worker/imap/open.go is to set the selected directory. This is required to access the UIDVALIDITY field, which is used in combination with the message ID to form the key for use in the cache db. The key structure is: "header.{UIDVALIDITY}.{UID}" Where reasonable, cache does not stop aerc from running. In general, if there is an error in the cache, aerc should continue working as usual. Errors are either displayed to the user or logged. All messages are stored without flags, and when retrieved have the flags set to SEEN. This is to prevent UI flashes. A new method to FetchMessageFlags is introduced to update flags of cached headers. This is done asynchronously, and the user will see their messages appear and then any flags updated. The message will initially show as SEEN, but will update to unread. I considered updating the cache with the last-known flag state, however it seems prudent to spare the R/W cycle and assume that - eventually - all messages will end up read, and if it isn't the update will occur rather quickly. Note that leveldb puts a lock on the database, preventing multiple instances of aerc from accessing the cache at the same time. Much of this work is based on previous efforts by Vladimír Magyar. Implements: https://todo.sr.ht/~rjarry/aerc/2 Thanks: Vladimír Magyar <vladimir@mgyar.me> Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Tested-by: inwit <inwit@sindominio.net> Reviewed-by: Koni Marti <koni.marti@gmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
* msgviewer: parse and display authentication resultsKoni Marti2022-06-091-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Parse the Authentication-Results header and display it in the message viewer (not enabled by default). DKIM, SPF and DMARC authentication methods are supported. Implement recommendation from RFC 7601 Sec 7.1 to have an explicit list of trustworthy hostnames before displaying the authentication results. Be aware that the authentication headers can be forged. To display the results for a specific authentication method, add the corresponding name to the layout of headers in the viewer section of aerc.conf, e.g. to display all three, use: header-layout = From|To,Cc|Bcc,Date,Subject,DKIM|SPF|DMARC More information will be displayed when "+" is appended to the authentication method name, e.g. DKIM+ or SPF+ or DMARC+. Also, add the trustworthy hosts per account with the trusted-authres parameter, e.g. trusted-authres = * to trust every host or use regular expressions for a finer control. Multiple hosts can be entered as a comma-separated list. Authentication results will only be displayed when the host is listed in the trusted-authres list. Link: https://datatracker.ietf.org/doc/html/rfc7601 Signed-off-by: Koni Marti <koni.marti@gmail.com> Tested-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* invites: reply with accept, accept-tentative or declineKoni Marti2022-05-311-0/+13
| | | | | | | | | | Reply to iCalendar invitations with three commands: :accept, :accept-tentative or :decline. Parse a text/calendar request, create a reply and append it to the composer. Suggested-by: Ondřej Synáček <ondrej@synacek.org> Signed-off-by: Koni Marti <koni.marti@gmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
* commands: implement fuzzy completion for commands and optionskt programs2022-03-071-0/+2
| | | | | | | | Change the option to enable fuzzy completion to be fuzzy-complete, since it's no longer only used for folders Signed-off-by: Kt Programs <ktprograms@gmail.com> Acked-by: Koni Marti <koni.marti@gmail.com>
* threading: implement on-the-fly message threadingKoni Marti2022-02-241-0/+17
| | | | | | | | | | | | | | | | | | | | implement message threading on the message store level using the jwz algorithm. Build threads on-the-fly when new message headers arrive. Use the references header to create the threads and the in-reply-to header as a fall-back option in case no references header is present. Does not run when the worker provides its own threading (e.g. imap server threads). Include only those message headers that have been fetched and are stored in the message store. References: https://www.jwz.org/doc/threading.html Signed-off-by: Koni Marti <koni.marti@gmail.com> Tested-by: Inwit <inwit@sindominio.net> Tested-by: akspecs <akspecs@gmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
* main: use terminfo to set window titleRobin Jarry2022-02-201-0/+2
| | | | | | | | | | Parse the terminal capabilities from the TERM environment variable instead of using a hard coded list of terminals. tcell does not expose the status line capabilities. Use another library for this: github.com/xo/terminfo Signed-off-by: Robin Jarry <robin@jarry.cc>
* pgp: update openpgp packages (go-crypto and go-pgpmail)Koni Marti2022-01-071-16/+5
| | | | | | | Replaces golang.org/x/crypto with github.com/ProtonMail/go-crypto consistently and updates go-pgpmail to v0.2.0 Signed-off-by: Koni Marti <koni.marti@gmail.com>
* go.mod: cleanupRobin Jarry2021-11-051-58/+5
| | | | | | Run go mod tidy. Signed-off-by: Robin Jarry <robin@jarry.cc>
* imap: use builtin idle supportRobin Jarry2021-11-021-4/+0
| | | | | | | go-imap supports IDLE since 1.2.0. Remove dependency to go-imap-idle. Link: https://github.com/emersion/go-imap/commit/ac3f8e195ef1b6d Signed-off-by: Robin Jarry <robin@jarry.cc>
* go: update all dependenciesRobin Jarry2021-11-011-0/+399
| | | | Signed-off-by: Robin Jarry <robin@jarry.cc>
* update tcell to v2 and enable TrueColor supporty0ast2020-12-181-5/+3
| | | | | | | | | Also update to the tcell v2 PaletteColor api, which should keep the chosen theme of the user intact. Note, that if $TRUECOLOR is defined and a truecolor given, aerc will now stop clipping the value to one of the theme colors. Generally this is desired behaviour though.
* notmuch: remove gc close hooksReto Brunner2020-12-021-2/+2
| | | | | | | We frequently had issues with notmuch segfaulting and my guess is that this was due to the garbage collection magic used in the module. This changes to a fork that ripped the functionality out.
* compose: use a proper header instead of a string mapReto Brunner2020-11-141-4/+8
| | | | | | | | | | | | | Prior to this commit, the composer was based on a map[string]string. While this approach was very versatile, it lead to a constant encoding / decoding of addresses and other headers. This commit switches to a different model, where the composer is based on a header. Commands which want to interact with it can simply set some defaults they would like to have. Users can overwrite them however they like. In order to get access to the functions generating / getting the msgid go-message was upgraded.
* update go-imap-sortthready0ast2020-10-181-2/+2
| | | | | | Fixes a problem with "Missing Sort Criteria" because go-imap-sortthread wasn't sending the sort request in an RFC compliant way. This has been fixed in the latest commit.
* update go-imapy0ast2020-10-151-2/+2
| | | | | | This fixes the problem that when the header contains "undisclosed-recipients:;", which got parsed by go-imap as "<undisclosed-recipients@>, <@>". If we do reply all, aerc adds these malformed emails to the To: field.
* imap: add sort supportReto Brunner2020-10-111-2/+8
|
* Update go-imap to latest commitReto Brunner2020-09-151-2/+4
| | | | | | | | | | | | | | | | | | | | * return empty reader instead of nil when BODY is found but server returns nil * utf7: fix package doc comment * imap: lower some fields + content disposition keys * remove "should not be called directly" comments and replaced them with links to the GitHub wiki pages * backendutil: Improve Match function * Write NIL for empty ENVELOPE fields * readme: add NAMESPACE extension * server: error when selecting should unselect * Support NIL hierarchy delimiter * backendutil: Implement message size and lines counting * readme: update CI badge to only show status for commits * Fix empty envelope address fields * server: Return proper BAD response for cancelled SASL negotiation * Replace empty string result in ErrStatusResp.Error * Move ErrStatusResp to the root package * Add MailboxInfoUpdate * Fix BodyStructure fields documented as encoded
* update go-messageReto Brunner2020-08-311-2/+2
|
* Revert "Upgrade tcell version to 1.4.0 to support truecolor"Drew DeVault2020-08-281-3/+5
| | | | This reverts commit 2ada00de1e682c43327d8cecf090b58528020ffc.
* Upgrade tcell version to 1.4.0 to support truecolory0ast2020-08-281-5/+3
|
* Update go-message, fixes various bugsReto Brunner2020-07-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | Changelog: d262af7 (tag: v0.12.0) textproto: check header characters 5b97b1b Remove hz-gb-2312 encoding as it can crash 0e60ea0 writer: add Mime-Version header when missing c512562 textproto: add Header.Raw and HeaderFields.Raw 4af4c77 textproto: Add HeaderFields.Len f828d02 Add test converting an Entity to quoted-printable 8c6ac6b Add CreateInlineWriter to get a writer that allows alternatives, but no attachments. fee642d (tag: v0.11.2) Fix incorrect line folding of RFC2047-encoded strings 9c4415e textproto: add limits for header field length and total amount of fields 46fe03d mail: add Message-Id test with IPv6 address 6c32091 textproto: add MultipartReader tests 9ce1b6f textproto: remove unused skipSpace function a41879c mail: add tests for Header.{MessageID,MsgIDList} 82eb31c mail: add Header.MessageID and Header.MsgIDList 7e482a2 mail: add headerParser 40e7be6 textproto: minor doc improvements f119d5f readme: remove stability badge e48b6c5 mail: minor comments and docs improvements 8ade7dd textproto: add error on invalid header key
* creak/pty got force pushed: fix versionReto Brunner2020-05-081-4/+2
|
* Use stdout as controlling terminalGuillaume J. Charmes2020-05-061-0/+2
| | | | | | | Soves an issue with go1.15 not letting ctty be a parent. See https://github.com/creack/pty/pull/97 for more details. Signed-off-by: Guillaume J. Charmes <git+guillaume@charmes.net>
* Revert "Dont detach process under vterm"Drew DeVault2020-05-061-2/+0
| | | | This reverts commit d07cf6c667a0d497c67196fca9967db71c1e02f6.
* Dont detach process under vtermGuillaume J. Charmes2020-05-061-0/+2
| | | | Signed-off-by: Guillaume J. Charmes <git+guillaume@charmes.net>
* Bump ProtonMail/crypto to fix build on OpenBSDAnirudh Oppiliappan2020-04-201-2/+2
| | | | Signed-off-by: Anirudh Oppiliappan <x@icyphox.sh>
* go mod tidy, updated go.sumReto Brunner2020-04-061-0/+13
|
* Mark sent messages as "seen" in maildirGalen Abell2020-03-091-1/+0
| | | | | | | - Add maildir flags to complement a messages imap flags - Set the "seen" flag on sent messages when using the maildir backend - Cleanup AppendMessage interface to use models.Flag for both IMAP and maildir
* go.sum: re-add notmuchReto Brunner2020-03-051-0/+1
|
generated by cgit (git 2.34.1) at 2024-11-01 08:33:05 +0000