aboutsummaryrefslogtreecommitdiffstats
path: root/doc
Commit message (Collapse)AuthorAgeFilesLines
* templates: add boolean flagsRobin Jarry2023-05-201-0/+8
| | | | | | | | | | | | | | | | | | Allow accessing email flags via boolean properties instead of having to rely on obscure regular expressions on (.Flags | join ""). With this patch, it is now possible to do this: [ui] index-columns = star:1,name<15%,reply:1,subject,size>=,date>= column-star = {{if .IsFlagged}}★{{end}} column-name = {{if eq .Role "sent"}}{{.To | names | join ", "}}{{else}}{{.From | names | join ", "}}{{end}} column-reply = {{if .IsReplied}}{{end}} column-subject = {{.ThreadPrefix}}{{.Subject}} column-size = {{if .HasAttachment}}📎 {{end}}{{humanReadable .Size}} column-date = {{.DateAutoFormat .Date.Local}} Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Koni Marti <koni.marti@gmail.com>
* headers: enable partial header fetchingTim Culverhouse2023-05-161-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enable partial header fetching by creating config values for headers to specifically include, or specifically exclude. The References field will always be fetched, regardless of the include list. Envelope data is always fetched, but is not shown with :toggle-headers, since it isn't in the RFC822 struct unless explicitly included in the list. Partial headers can break the cache on changes. Update the cache tag key to include the state of the partially-fetched headers. Partial header fetching can have a significant performance increase for IMAP, and for all backends a resource improvement. Some data to support this is below. Gathered by opening aerc, selecting a mailbox with approximately 800 messages and scrolling to the end. Received measured with nethogs, RAM from btop Received | RAM ------------------------------------- All Headers | 9,656 kb | 103 MB Minimum Headers | 896 kb | 36 MB Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Moritz Poldrack <moritz@poldrack.dev> Acked-by: Robin Jarry <robin@jarry.cc>
* config: update default pagerMoritz Poldrack2023-05-161-1/+1
| | | | | | | | | | | Since aercs embedded terminal now behaves correctly, a messages contents are at the bottom of the pager by default, this has already sparked confusion as this is uncommon and not matching previous behaviour. Thanks: Stacy Harper <contact@stacyharper.net> Suggested-by: Tim Culverhouse <tim@timculverhouse.com> Signed-off-by: Moritz Poldrack <git@moritz.sh> Acked-by: Robin Jarry <robin@jarry.cc>
* compose: warn before sending with empty subjectJason Cox2023-05-161-0/+5
| | | | | | | | Ask user whether they want to abort before sending if the subject header is empty and they have enabled the warn-empty-subject config option. Signed-off-by: Jason Cox <me@jasoncarloscox.com> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* colorize: style chunk function nameJason Cox2023-05-161-0/+2
| | | | | | | | | It's nice to use a different style for the chunk's function name to make it clear that the name is not necessarily adjacent to the chunk's actual lines. Signed-off-by: Jason Cox <me@jasoncarloscox.com> Acked-by: Robin Jarry <robin@jarry.cc>
* term: add config options for TERM and osc8Tim Culverhouse2023-04-241-0/+12
| | | | | | | | Add config options for setting the TERM environment variable used in tcell-term and for enabling or disabling OSC8 escape sequence output. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry<robin@jarry.cc>
* mailto: add template parameterKoni Marti2023-04-221-0/+2
| | | | | | | | | Add template parameter to the mailto query and set the config.Template.NewMessage template file as default. Fixes: https://todo.sr.ht/~rjarry/aerc/145 Signed-off-by: Koni Marti <koni.marti@gmail.com> Acked-by: Robin Jarry<robin@jarry.cc>
* search: handle headers in search/filter queryJulian Marcos2023-04-221-1/+6
| | | | | | | | | Handle headers in the search and filter commands, for searching and filtering based on the Headers specified by the -H parameter, the syntax for the -H parameter should be `Header: Key`. Signed-off-by: Julian Marcos <jmjl@tilde.green> Acked-by: Robin Jarry<robin@jarry.cc>
* directory: add role to template fieldsTim Culverhouse2023-04-221-0/+6
| | | | | | | | | Add .Role as a template field for use in distinguishing between mailboxes with a given IANA role, or custom role defined by aerc ("query" for notmuch queries, for example). Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry<robin@jarry.cc>
* templates: change layered fg & bg color prioritiesRobin Jarry2023-04-151-7/+6
| | | | | | | | | | | | | This is mostly a revert of commit ae4d742c5a90 ("templates: fix layered fg & bg color for inline styles"). As it turns out, context colors (msglist_selected, msglist_marked, msglist_deleted, etc.) need to have priority over inline colors. Otherwise strange and confusing results occur. Reported-by: Skejg <grolleman@zoho.com> Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Tim Culverhouse <tim@timculverhouse.com>
* doc: clarify layered styles render priorityRobin Jarry2023-04-101-0/+43
| | | | | | | | | With all the new different options, the behaviour can be confusing. Add explicit rules and examples to avoid ambiguities. Reported-by: skejg <grolleman@zoho.com> Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Inwit <inwit@sindominio.net>
* hooks: add aerc-shutdownMoritz Poldrack2023-04-011-0/+8
| | | | | | | | | | Add a hook to run when aerc shuts down. The environment is supplemented with the duration aerc was alive for. References: https://todo.sr.ht/~rjarry/aerc/136 Signed-off-by: Moritz Poldrack <git@moritz.sh> Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Bence Ferdinandy <bence@ferdinandy.com>
* hooks: add aerc-startup hookMoritz Poldrack2023-04-011-0/+15
| | | | | | | | | | | Add a hook to run when aerc starts up. The environment is supplemented with aerc version and the path to its binary. References: https://todo.sr.ht/~rjarry/aerc/136 References: https://todo.sr.ht/~rjarry/aerc/139 Signed-off-by: Moritz Poldrack <git@moritz.sh> Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Bence Ferdinandy <bence@ferdinandy.com>
* config: replace triggers with hooksMoritz Poldrack2023-04-011-12/+15
| | | | | | | | | | | | | Deprecate triggers and replace them with hooks. Now that aerc supports running arbitrary ex commands over IPC, it is possible to run internal aerc commands *and* shell commands via external shell scripts. Hooks only allow running shell commands. Hooks info is passed via environment variables. Implements: https://todo.sr.ht/~rjarry/aerc/136 Signed-off-by: Moritz Poldrack <git@moritz.sh> Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Bence Ferdinandy <bence@ferdinandy.com>
* config: remove subject contextual ui sectionsRobin Jarry2023-03-311-9/+1
| | | | | | | | | | We have been wanting to remove this for a while now. The only use case is styleset and changing the whole styleset based on an email subject does not make much sense. The same feature can be achieve with dynamic msglist* styles based on any email header value in the stylesets now. Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Bence Ferdinandy <bence@ferdinandy.com>
* styleset: allow dynamic msglist stylingRobin Jarry2023-03-311-0/+20
| | | | | | | | | | | Add support for dynamic msglist*.$HEADER,$VALUE.$ATTR = $VALUE where $VALUE can be either a fixed string or a regular expression. This is intended as a replacement of contextual ui sections based on subject values. Implements: https://todo.sr.ht/~rjarry/aerc/18 Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Bence Ferdinandy <bence@ferdinandy.com>
* style: inherit colors unless explicitly set in layered stylesRobin Jarry2023-03-311-7/+11
| | | | | | | | Inherit from the lower layers colors unless explicitly overridden in upper layers. Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Bence Ferdinandy <bence@ferdinandy.com>
* smtp: replace smtp-starttls with schema optionMarcin Serwin2023-03-261-8/+5
| | | | | | | | | The "smtp-starttls" options is now ignored in favor of more detailed schema specification, similarly to IMAP. Fixes: https://todo.sr.ht/~rjarry/aerc/149 Signed-off-by: Marcin Serwin <marcin.serwin0@protonmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
* doc: merge duplicate :filter in aerc(1)witcher2023-03-161-6/+2
| | | | | | | | | | | :filter was given twice in the "MESSAGE LIST COMMANDS" section of aerc(1), both incomplete/wrong. Merge both to reference aerc-search(1) and say it actually *filters* the message list. Fixes: af63bd0188d1 ("doc: homogenize scdoc markup") References: https://todo.sr.ht/~rjarry/aerc/144 Signed-off-by: witcher <witcher@wiredspace.de> Acked-by: Moritz Poldrack <moritz@poldrack.dev>
* openers: support basic shell globbingRobin Jarry2023-03-131-1/+5
| | | | | | | Allow wild cards for MIME types like in filters. Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Bence Ferdinandy <bence@ferdinandy.com>
* openers: add mime type handling for open-linkRobin Jarry2023-03-132-6/+14
| | | | | | | | | Provide a way to configure link openers. Based on the URL mime type: x-scheme-handler/$scheme. Signed-off-by: Kirill Chibisov <contact@kchibisov.com> Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Bence Ferdinandy <bence@ferdinandy.com>
* doc: improve aerc-templates examplesRobin Jarry2023-03-131-2/+5
| | | | | | Adjust some examples with real world use cases. Signed-off-by: Robin Jarry <robin@jarry.cc>
* doc: add missing references to other manpagesTom Schwindl2023-03-091-2/+3
| | | | | | | | aerc(1) is most likely the entry point for a user who wants to read the docs. Thus, reference all other manpages to improve accessibility. Signed-off-by: Tom Schwindl <schwindl@posteo.de> Acked-by: Robin Jarry <robin@jarry.cc>
* templates: add conditional style methodRobin Jarry2023-03-081-0/+9
| | | | | | | | | | | | | Add .StyleSwitch that takes a string and an arbitrary number of cases (regexp, style). Reuse some of the constructs introduced by previous commit. The style of the first regular expression that matches will be applied. If the string does not match any of the expressions, it will be left as-is. Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* templates: add switch/case functionsRobin Jarry2023-03-081-0/+9
| | | | | | | This allows much shorter templates. Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* templates: add match functionRobin Jarry2023-03-081-0/+8
| | | | | | | | | | | | | | Add a match function that returns true if a string matches the provided regular expression. The compiled regular expressions are cached in a sync.Map to avoid repetitive compilations of the same expressions. Caveat: if the user mixes the arguments order, it may cause the cache to consume a lot of memory filled with garbage regular expression objects. Ideally, we would need to limit the size of this cache and/or use a LRU cache implementation. Maybe someday? Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* templates: reverse args order for .StyleRobin Jarry2023-03-081-1/+1
| | | | | | | | In preparation for .StyleMatch put the content first, followed by the style name. Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* templates: make SubjectBase official apiRobin Jarry2023-03-081-0/+6
| | | | | | | | Document .SubjectBase. Fix its value along the way. Do not reuse d.Subject() which may be empty if d.threadSameSubject is true. Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* templates: separate thread prefix from subjectRobin Jarry2023-03-081-2/+3
| | | | | | | | Extract {{.ThreadPrefix}} from {{.Subject}} so that the prefix can be styled in a different color. Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* change-tab: document "focus previous tab" functionalityinwit2023-03-071-2/+3
| | | | | | | | | | The current :change-tab command allows to be called with a single "-" as a parameter, in which case it changes focus to the previously focused tab. This is useful to switch back and forth between a pair of tabs, and is undocumented. Document this functionality. Signed-off-by: inwit <inwit@sindominio.net> Acked-by: Robin Jarry <robin@jarry.cc>
* ipc: allow triggering internal commands via IPCMoritz Poldrack2023-03-072-0/+9
| | | | | | | | | | | | | | | | | | | | | In order to make automation easier, it's useful to be able to send commands to aerc via IPC. This can be done by calling the aerc binary followed by a colon and the command to run. For example: aerc :read && aerc :remark && aerc :archive month Security to ensure no malicious commands are run is deferred to the user. By default the socket is only writable by the user. This is considered sufficient as the potential harm an attacker gaining write-access to a user's session can cause is significantly greater than "can delete some emails". To ensure users with an according threat model, it is possible to disable command IPC. mailto-handling is unaffected even though it works over IPC as it is absolutely non-destructive. Signed-off-by: Moritz Poldrack <git@moritz.sh> Acked-by: Robin Jarry <robin@jarry.cc>
* templates: allow inline user stylesTim Culverhouse2023-03-022-0/+19
| | | | | | | | | | | | | | | | | | | | Allow custom user-defined styles in a styleset. The styles can take any name, and must be under the [user] ini section. All attributes apply to user defined styles. Example: [user] red.fg=red red.bold=true Add a .Style function which accepts the name of a user-defined style and applies it to the string. {{.Style "red" "foo"}} Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* doc: add missing entries for :sign and :encryptwitcher2023-03-021-0/+10
| | | | | | | | Update aerc(1) with explanations about key selection priority. Fixes: https://todo.sr.ht/~rjarry/aerc/144 Signed-off-by: witcher <witcher@wiredspace.de> Acked-by: Robin Jarry <robin@jarry.cc>
* dirlist: use templates instead of % mini languageRobin Jarry2023-02-202-17/+13
| | | | | | | | | | | Replace dirlist-format with two settings: dirlist-left & dirlist-right. These two settings take aerc-templates(7) and may be left empty. Add automatic translation of dirlist-format to these new settings. Display a warning on startup if dirlist-format has been converted. Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* templates: add compactDir functionRobin Jarry2023-02-201-0/+9
| | | | | | | This will be used in the dirtree-format replacement by templates. Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* statusline: add column based render formatRobin Jarry2023-02-202-28/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the spirit of commit 535300cfdbfc ("config: add columns based index format"), reuse the column definitions and table widget. Add automatic translation of render-format to column definitions. Allow empty columns to be compatible with the %m (mute) flag. Rename the State object to AccountState to be more precise. Reuse that object in state.TempateData to expose account state info. Move actual status line rendering in StatusLine.Draw(). Add new template fields for status specific data: {{.ConnectionInfo}} Connection state. {{.ContentInfo}} General status information (e.g. filter, search) {{.StatusInfo}} Combination of {{.ConnectionInfo}} and {{.StatusInfo}} {{.TrayInfo}} General on/off information (e.g. passthrough, threading, sorting) {{.PendingKeys}} Currently pressed key sequence that does not match any key binding and/or is incomplete. Display a warning on startup if render-format has been converted to status-columns. Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* triggers: use templates instead of % mini languageRobin Jarry2023-02-201-6/+10
| | | | | | | | | | | | | | | | | | | | | Since previous commit, all commands now support expanding text/template markup. Reuse that for the new-email trigger command. Update commands.ExecuteCommand to take optional *AccountConfig and *MessageInfo arguments. If these are nil, fallback to using the currently selected account and message (if any). Pass the proper *AccountConfig and *MessageInfo objects when firing the trigger command so that these are used instead of the currently selected ones. If new-email contains % placeholders, try to convert them to template markup reusing the same conversion added in commit 535300cfdbfc ("config: add columns based index format"). Warn the user that they need to update their configuration file. Signed-off-by: Robin Jarry <robin@jarry.cc> Reviewed-by: Moritz Poldrack <moritz@poldrack.dev>
* commands: expand template placeholdersAivars Vaivods2023-02-201-0/+9
| | | | | | | | | Interpret go template constructs in all aerc command arguments based on the currently selected account, folder and message (if any). Signed-off-by: Aivars Vaivods <aivars@vaivods.lv> Signed-off-by: Robin Jarry <robin@jarry.cc> Reviewed-by: Tim Culverhouse <tim@timculverhouse.com>
* templates: add now functionRobin Jarry2023-02-201-0/+8
| | | | | | | This allows to get the current local time. Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Moritz Poldrack <moritz@poldrack.dev>
* templates: add firstnames and shortmboxes functionsRobin Jarry2023-02-201-1/+20
| | | | | | | These can be handy for tab-title-composer. Signed-off-by: Robin Jarry <robin@jarry.cc> Reviewed-by: Moritz Poldrack <moritz@poldrack.dev>
* templates: add message counts for specific foldersRobin Jarry2023-02-201-1/+10
| | | | | | | | | Change the {{.Recent}}, {{.Unread}} and {{.Exists}} template fields to take an arbitrary number of folder names as arguments. If no folder name is specified, these return the counts for all folders. Signed-off-by: Robin Jarry <robin@jarry.cc> Acked-by: Tim Culverhouse <tim@timculverhouse.com>
* compose: ensure signature uses standard delimiterMoritz Poldrack2023-02-121-0/+5
| | | | | | | | | | | | Since it has recently been a topic on IRC, and to guide users new to "raw" email, add a note on how signatures are detected and what they should look like. Prepend signature-file and signature-cmd with the standard delimiter if missing. Signed-off-by: Moritz Poldrack <git@moritz.sh> Signed-off-by: Robin Jarry <robin@jarry.cc>
* tabs: use template for compose tabsTim Culverhouse2023-02-121-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | Use a template for compose tabs. Other available values: Account string Subject string To []*mail.Address From []*mail.Address Cc []*mail.Address Bcc []*mail.Address OriginalFrom []*mail.Address When you use To, From, CC, BCC, or OriginalFrom the title will only be updated when an editing field has lost focus. This is so we don't end up calling "PrepareHeader" on every keystroke, which will likely error out anyways since it will be an invalid header. Subject still updates every keystroke. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* templates: add initials functionBence Ferdinandy2023-02-121-0/+10
| | | | | | | | | | When listing all addresses with names, in for example the To field, one might end up with a very long string. Add the initials function, which extracts the names from addresses and then shortens each of them to the initials of the name. Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com> Acked-by: Robin Jarry <robin@jarry.cc>
* config: add option for SMTP HELO/EHLO local domainKarel D. Kopecký2023-02-021-0/+6
| | | | | | | | | | | | | | | | Expose go-smtp functionality for setting the domain name as a config option. This allows aerc to communicate with SMTP servers with strict antispam measures without relying on sendmail. In theory, this should be set to a fully qualified domain name, but some servers simply forbid the use of "localhost", so it is reasonable to let the user set whatever value works for them. For comparison, this is equivalent to the functionality of the "domain" option of msmtp. Signed-off-by: Karel D. Kopecký <kdk@freeshell.de> Acked-by: Robin Jarry <robin@jarry.cc>
* templates: add trimSignature functionMoritz Poldrack2023-01-291-1/+9
| | | | | | | | | | | Some contacts, especially corporate, include a wall of text in their signatures. To not clutter the reply chain, this commit introduces a new function to the templating engine that removes the signature from a message. Link: https://learn.microsoft.com/en-us/microsoft-365/admin/setup/create-signatures-and-disclaimers Signed-off-by: Moritz Poldrack <git@moritz.sh> Acked-by: Robin Jarry <robin@jarry.cc>
* tabs: use template for account tab nameTim Culverhouse2023-01-292-0/+14
| | | | | | | | | | | Use a go template to render the account tab display. Add config option for setting a specific template for the account. Add a method on Tab to allow setting a title, which may be different than the tab Name. The default template is {{.Account}}. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* compose: allow sending format=flowed messagesRobin Jarry2023-01-261-0/+9
| | | | | | | | | | | | | | | | | | | | Allow composing and sending messages with: Content-Type: text/plain; Format=Flowed This requires additional configuration in the text editor to actually produce the required trailing spaces at the end of lines that are part of the same paragraph. For example, with vim: "~/.vim/ftplugin/mail.vim setlocal textwidth=72 setlocal formatoptions=1jnwtcql setlocal comments+=nb:> Link: https://www.rfc-editor.org/rfc/rfc3676.html Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Moritz Poldrack <moritz@poldrack.dev>
* viewer: allow piping full headers in a filterRobin Jarry2023-01-261-0/+11
| | | | | | | | Allow defining a .headers special filter command that will be used only to process email headers (when [viewer].show-headers=true). Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Kt Programs <ktprograms@gmail.com>
* filters: rewrite colorize in cRobin Jarry2023-01-262-6/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since its introduction, we had multiple issues with the colorize awk script with regard to non-GNU awk compatibility. Also, this script is standalone and the color theme must be hard coded into it. Reading from an external configuration file (aerc's styleset) from a non-GNU awk is close to impossible (and even far from trivial with GNU awk). Rewrite the builtin colorize filter in C to allow getting the color theme from aerc's active styleset. The theme is configured using the existing styleset syntax and attributes under a separate [viewer] section (see examples and man page). Export the active styleset file path to AERC_STYLESET env var when invoking the filter command so that colorize can access it and use it. I have tested compilation (with clang-analyzer and gcc -fanalyzer) and basic operation on FreeBSD, Fedora (glibc) and Alpine (muslibc). More tests would probably be required on MacOSX and older Linux distros. I also added test vectors to give some confidence that this works as expected. The execution with these vectors passed valgrind --leak-check=full without errors. NB: the default theme has changed to be more minimal. Sample stylesets have more colorful examples. The awk -v theme=xxx option is no longer supported. usage: colorize [-h] [-s FILE] [-f FILE] options: -h show this help message -s FILE use styleset file (default $AERC_STYLESET) -f FILE read from filename (default stdin) Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Bence Ferdinandy <bence@ferdinandy.com> Acked-by: Moritz Poldrack <moritz@poldrack.dev>
generated by cgit (git 2.34.1) at 2024-11-01 08:17:45 +0000