aboutsummaryrefslogtreecommitdiffstats
path: root/doc
Commit message (Collapse)AuthorAgeFilesLines
* pipe: allow closing the terminal automaticallyJohannes Thyssen Tishman2024-04-131-0/+2
| | | | | | | | | | | | | Add a new -s flag to :pipe. When specified, the terminal tab opened by the :pipe command will be automatically closed after the process is completed instead of prompting for a key press. While this doesn't technically silence the command (the output is not suppressed), the output is not shown to the user. Changelog-added: Silently close the terminal tab after piping a message to a command with `:pipe -s <cmd>`. Signed-off-by: Johannes Thyssen Tishman <johannes@thyssentishman.com> Acked-by: Robin Jarry <robin@jarry.cc>
* docs: be more explicit about the behaviour of :acceptBence Ferdinandy2024-04-131-1/+6
| | | | | | | | | | Accept can be a bit confusing when coming from something like gmail or outlook, where clicking the accept button not only sends the accept email, but also inserts the meeting into one's calendar. Be more explicit about what happens. Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com> Acked-by: Robin Jarry <robin@jarry.cc>
* config: allow global options in accounts.confJohannes Thyssen Tishman2024-04-131-3/+6
| | | | | | | | | | | | | Global options may be configured by placing them at the top of the accounts.conf file, before any account-specific sections. These can be overridden for an account by specifying them again in the account section. Changelog-added: Set global options in `accounts.conf` by placing them at the top of the file. Signed-off-by: Johannes Thyssen Tishman <johannes@thyssentishman.com> Tested-by: Bence Ferdinandy <bence@ferdinandy.com> Acked-by: Robin Jarry <robin@jarry.cc>
* ipc: add more fine-grained options to disable IPCJason Cox2024-04-131-0/+12
| | | | | | | | | | | | Add disable-ipc-mailto and disable-ipc-mbox to make mailto:... and mbox:... commands always run in a new instance, while still allowing aerc-internal commands (i.e., aerc :<command...>) to run over IPC. Changelog-added: Add config options `disable-ipc-mailto` and `disable-ipc-mbox` to make `mailto:...` and `mbox:...` commands always run in a new aerc instance. Signed-off-by: Jason Cox <me@jasoncarloscox.com> Acked-by: Robin Jarry <robin@jarry.cc>
* ipc: disable IPC completely when disable-ipc=trueJason Cox2024-04-132-6/+8
| | | | | | | | | | | | | | | Truly disable IPC when disable-ipc is set to true in aerc.conf. Don't run commands over IPC and don't start an IPC server. Being able to disable IPC in the config is useful because it allows making aerc open mailto links in a new instance without modifying the aerc.desktop file. There are of course potential security benefits as well. Changelog-changed: The `disable-ipc` option in `aerc.conf` completely disables IPC. Signed-off-by: Jason Cox <me@jasoncarloscox.com> Acked-by: Robin Jarry <robin@jarry.cc>
* ipc: add --no-ipc flag to completely disable IPCJason Cox2024-04-131-2/+17
| | | | | | | | | | | | | | | | | Running aerc mailto:... and aerc mbox:... can be confusing; if there's another aerc instance already open, the action will be performed in the other instance, which may not be visible. Add a --no-ipc flag that runs these actions, and aerc-internal commands (i.e., aerc :<command>), in the new aerc instance instead. Also, if --no-ipc is passed, don't listen on a socket for IPC calls from other aerc instances. Changelog-added: Add `--no-ipc` flag to run `aerc mailto:...`, `aerc mbox:...`, and `aerc :<command...>` within the current aerc instance and prevent listening for IPC calls from other aerc instances. Signed-off-by: Jason Cox <me@jasoncarloscox.com> Acked-by: Robin Jarry <robin@jarry.cc>
* ui: use a custom prefix for dummy rootJulio B2024-04-131-0/+11
| | | | | | | | | | These messages are not really the root of the thread, and should not be displayed as such. Add a new special prefix to make them appear like the first child of a rootless thread. Signed-off-by: Julio B <julio.bacel@gmail.com> Tested-by: Inwit <inwit@sindominio.net> Acked-by: Robin Jarry <robin@jarry.cc>
* gpg: add pgp-self-encrypt optionBartkk2024-04-031-0/+6
| | | | | | | | | | Add an option to encrypt outgoing messages to the sender or the key specified in pgp-key-id. Implements: https://todo.sr.ht/~rjarry/aerc/237 Changelog-added: New `pgp-self-encrypt` option in `accounts.conf`. Signed-off-by: Bartkk <bartkk@bartkk.xyz> Acked-by: Robin Jarry <robin@jarry.cc>
* config: make popover dialogs configurableJohannes Thyssen Tishman2024-04-021-0/+18
| | | | | | | | | | | | Add the [ui].dialog-{position,width,height} options in aerc.conf to set the position, width and height of popover dialogs such as the one from :menu, :envelope or :attach -m relative to the main window. Changelog-added: Add `[ui].dialog-{position,width,height}` to set the position, width and height of popover dialogs. Signed-off-by: Johannes Thyssen Tishman <johannes@thyssentishman.com> Reviewed-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* notmuch: add strategies for multi-file messagesJason Cox2024-04-022-10/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A single notmuch message can represent multiple files. As a result, file-based operations like move, copy, and delete can be ambiguous. Add a new account config option, multi-file-strategy, to tell aerc how to handle these ambiguous cases. Also add options to relevant commands to set the multi-file strategy on a per-invocation basis. If no multi-file strategy is set, refuse to take file-based actions on multi-file messages. This default behavior is mostly the same as aerc's previous behavior, but a bit stricter in some cases which previously tried to be smart about multi-file operations (e.g., move and delete). Applying multi-file strategies to cross-account copy and move operations is not implemented. These operations will proceed as they have in the past -- aerc will copy/move a single file. However, for cross-account move operations, aerc will refuse to delete multiple files to prevent data loss as not all of the files are added to the destination account. See the changes to aerc-notmuch(5) for details on the currently supported multi-file strategies. Changelog-added: Tell aerc how to handle file-based operations on multi-file notmuch messages with the account config option `multi-file-strategy` and the `-m` flag to `:archive`, `:copy`, `:delete`, and `:move`. Signed-off-by: Jason Cox <me@jasoncarloscox.com> Tested-by: Maarten Aertsen <maarten@nlnetlabs.nl> Acked-by: Robin Jarry <robin@jarry.cc>
* filters: add matching against attachment filenameBence Ferdinandy2024-03-251-1/+10
| | | | | | | | | | | | The mimetype of attachments are set by the sender, which can results in attachments getting not so useful mimetypes (e.g. application/octet-stream for a csv). Allow matching filter against filenames directly, by adding the `.filename,` and `.filename,~` syntax, similarly to headers. Changelog-added: Match filters on filename via `.filename,~<regexp> =`. Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com> Acked-by: Robin Jarry <robin@jarry.cc>
* docs: update filter tips for imagesBence Ferdinandy2024-03-251-7/+9
| | | | | | | | | | Since aerc uses vaxis, the image/* filter has incorrect information. Update this with the new behaviour. Fixes: 4e26faf498b8 ("msgviewer: implement inline image viewing") Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com> Reviewed-by: Inwit <inwit@sindominio.net> Acked-by: Robin Jarry <robin@jarry.cc>
* docs: correct IMAP IDLE default settingGary Kim2024-03-251-1/+1
| | | | | | | | Correct aerc-imap(5) which currently has the default idle-timeout listed as 10ms even though the actual default is 10s. Signed-off-by: Gary Kim <gary@garykim.dev> Acked-by: Robin Jarry <robin@jarry.cc>
* detach: add glob supportTristan Partin2024-03-101-1/+2
| | | | | | | | | This matches the behavior of :attach. Changelog-added: The `:detach` command now understands globs similar to `:attach`. Signed-off-by: Tristan Partin <tristan@partin.io> Acked-by: Robin Jarry <robin@jarry.cc>
* quit: add :q aliasTristan Partin2024-03-101-1/+2
| | | | | | | | | | | | This used to work, but after f3a61a34 (where :query) was added, we had two commands which then started with q. So, the automatic alias stopped working. Changelog-added: Specify a ":q" alias for quit. Signed-off-by: Tristan Partin <tristan@partin.io> Acked-by: Moritz Poldrack <moritz@poldrack.dev> Acked-by: Robin Jarry <robin@jarry.cc>
* templates: add visual mode indicator to TrayInfoJason Cox2024-03-041-2/+2
| | | | | | | | | | | It's useful to have some indicator of whether or not aerc is in visual mark mode. Add such an indicator to the TrayInfo available in the status line. Changelog-changed: The `TrayInfo` template variable now includes a visual mark mode indicator. Signed-off-by: Jason Cox <me@jasoncarloscox.com> Acked-by: Robin Jarry <robin@jarry.cc>
* aerc-stylesets: document msglist_thread_contextMaarten Aertsen2024-02-281-0/+3
| | | | | | | | | | Document the msglist_thread_context styleset object that allows styling the additional messages displayed when using the show-thread-context option. Fixes: 4ec1e1a5e4c7 ("ui: enable showing of thread-context") Signed-off-by: Maarten Aertsen <maarten@nlnetlabs.nl> Acked-by: Robin Jarry <robin@jarry.cc>
* commands: add :query to create named notmuch dirsJason Cox2024-02-261-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current :cf command can be used to create folders for arbitrary notmuch queries. These folders use the query as their namee. In some cases, though, it's useful to give a more human-readable name. Create a new :query command to allow doing so. The :query command accepts an optional -n flag to specify a name. The remaining arguments are interpreted verbatim as a notmuch query. If no name is specified, the query itself is used as the name. For example, to create a new folder with the full thread of the current message, named by its subject, run the following command: :query -n "{{.SubjectBase}}" thread:"{mid:{{.MessageId}}}" :query could have been implemented as an additional flag to :cf. Giving a name to the created folder would make the smantics of :cf strange, though. For example, to create a named query folder, one would use :cf -n <name> <query>. This syntax feels odd; the name of the folder seems like it ought to be the positional argument of the change folder command. Alternatively, the usage could be :cf -q <query> <name>, but this feels wrong as well: the query, which is provided as a positional parameter when no name is specified, becomes a flag parameter when a name is specified. What's more, both of these potential usages add a notmuch-specific flag to an otherwise general command. Creating a new command feels cleaner. Perhaps the current query functionality of the :cf command could eventually be deprecated to remove the duplicate functionality and keep :cf limited to changing to existing folders. Changelog-added: Create notmuch named queries with the `:query` command. Signed-off-by: Jason Cox <me@jasoncarloscox.com> Tested-by: Inwit <inwit@sindominio.net> Acked-by: Robin Jarry <robin@jarry.cc>
* msglist: allow configuring default splitRobin Jarry2024-02-221-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new setting to configure the default split layout for message list tabs. The syntax is a bit different from the :split and :vsplit commands since it needs to convey the direction in the value as well. I didn't reuse split/vsplit since they are a bit confusing when used in a configuration file. The syntax is as follows: message-list-split = [<direction>] <size> The direction is optional and defaults to horizontal. The size is the number of terminal cells that will be used to display the message list. All these examples are equivalent: message-list-split = horiz 12 message-list-split = h 12 message-list-split = 12 Same idea for vertical splits: message-list-split = vertical 120 message-list-split = vert 120 message-list-split = v 120 Both :split and :vsplit commands remain usable as before. The configuration options only affect the initial layout at startup. Add config.SPLIT_* constants and sanitize AccountView.{Split,Vsplit} methods. Changelog-added: Configure default message list `:split` or `:vsplit` on startup with `message-list-split` in `aerc.conf`. Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Tim Culverhouse <tim@timculverhouse.com>
* binds: refactor parser to be more tolerantTim Culverhouse2024-02-221-174/+8
| | | | | | | | Refactor the bind parser to construct arbitrary modified keys instead of only relying on built in maps. Add additional tests to cover edge cases. Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* ipc: accept verbatim commandsJason Cox2024-02-191-0/+9
| | | | | | | | | | | | | | | | | | | | | | | When aerc receives a command over IPC, it quotes the arguments before passing them on to the internal command parser. In many cases, the parser interprets the quotes, and the command runs with the arguments exactly as they were specified in the shell. In some cases, though, the quotes are not interpreted and the additional quotes can cause the command to fail. Simply eliminating the addition of quotes is not possible because some commands need them. Allow a command and its arguments to be specified as a single argument in the shell. In that case, pass that argument verbatim to the internal command parser so that it is interpreted exactly as if it had been typed directly in aerc's command line. Link: https://lists.sr.ht/~rjarry/aerc-devel/%3C20240203085541.27416-2-contact%40willowbarraco.fr%3E Changelog-added: Execute IPC commands verbatim by providing the command and its args as a single argument in the shell. Cc: Willow Barraco <contact@willowbarraco.fr> Signed-off-by: Jason Cox <me@jasoncarloscox.com> Acked-by: Robin Jarry <robin@jarry.cc>
* hooks: add Message-ID to variables for mail-receivedMoritz Poldrack2024-02-141-0/+1
| | | | | | | | | | | | When scripting for the mail-received hook, it can be useful to identify a mail in a maildir. In that case the Message-ID might be one of the most useful parameters to go for identifying the file of a message. Changelog-changed: Add Message-ID to the variables of `[hooks].mail-received`. Suggested-by: Kirill Chibisov <contact@kchibisov.com> Signed-off-by: Moritz Poldrack <git@moritz.sh> Acked-by: Robin Jarry <robin@jarry.cc>
* colorize: preserve defaults unless overriddenRobin Jarry2024-02-141-2/+33
| | | | | | | | | | | | | | | To be consistent with stylesets for the rest of aerc's UI, settings in the [viewer] section now only override the default colorize theme. Implements: https://todo.sr.ht/~rjarry/aerc/222 Changelog-changed: The `[viewer]` section of stylesets now preserve default values as documented in `aerc-stylesets(7)` unless explicitly overridden. Requested-by: Karel Balej <balejk@matfyz.cz> Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Karel Balej <balejk@matfyz.cz> Tested-by: Matěj Cepl <mcepl@cepl.eu> Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
* config: change default appearanceRobin Jarry2024-02-142-41/+54
| | | | | | | | | | | | | | | | | | | The default styleset and ui settings are quite dull and don't make use of the "newer" features that have been added to aerc in the past two years. Change the default styleset to something more colorful that renders correctly on both dark and light backgrounds. Change the default ui settings to get something more appealing to new users. Save the previous default color theme to a new `monochrome` styleset. Changelog-changed: The default `[ui]` settings and the `default` styleset have changed extensively. A no-color theme can be restored with the `monochrome` styleset. Cc: Marc Coquand <marc@mccd.space> Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
* commands: add bounceKarel Balej2024-02-121-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add a command to allow for reintroduction of messages into the transport system. This means taking a message and forwarding it to new recipients as is including original headers. The fact that the message has been bounced is indicated by the prepend of *Resent-* headers in accordance with RFC 2822. The bounced message is not stored in the sent mailbox. Also add an `-A` switch to allow for bouncing using different account than the one currently selected. Also add default keybind and documentation entry for this command. The mentioned RFC also recognizes *Resent-Cc* and *Resent-Bcc* headers which might be an interesting continuation of this -- currently all recipients are specified in *Resent-To*. Also more control over the *Resent-From* header value could be implemented. This command is strongly inspired by (neo)mutt's `bounce`. Implements: https://todo.sr.ht/~rjarry/aerc/115 Changelog-added: `:bounce` command to reintroduce messages into the transport system. Signed-off-by: Karel Balej <balejk@matfyz.cz> Acked-by: Robin Jarry <robin@jarry.cc>
* docs: update docs to remove tcell referenceTim Culverhouse2024-02-121-2/+1
| | | | | | | Update color value reference in documentation Signed-off-by: Tim Culverhouse <tim@timculverhouse.com> Acked-by: Robin Jarry <robin@jarry.cc>
* templates: Add documentation for .SignatureJohannes Thyssen Tishman2024-02-111-0/+8
| | | | | | | | Document the recently added {{.Signature}} template. Signed-off-by: Johannes Thyssen Tishman <johannes@thyssentishman.com> Acked-by: Robin Jarry <robin@jarry.cc>
* commands: add alignKoni Marti2024-02-111-0/+7
| | | | | | | | | | | | | | | | | | | | | Add a new :align command that aligns the selected message vertically at the top, center, or bottom of the message list. The command requires a position argument that can either be: "top", "center", or "bottom". Create the following default keybinds: zz = :align center<Enter> zt = :align top<Enter> zb = :align bottom<Enter> Changelog-added: Add new `:align` command to align the selected message at the top, center, or bottom of the message list. Suggested-by: Ángel Castañeda <angel@acsq.me> Signed-off-by: Koni Marti <koni.marti@gmail.com> Tested-by: Jason Cox <me@jasoncarloscox.com> Acked-by: Robin Jarry <robin@jarry.cc>
* config: add msglist-scroll-offsetKoni Marti2024-02-111-0/+6
| | | | | | | | | | | | Add the [ui].msglist-scroll-offset option in aerc.conf to set the scroll offset in number of lines from the top and bottom of the message list. Changelog-added: Add `[ui].msglist-scroll-offset` option to set a scroll offset for the message list. Suggested-by: Ángel Castañeda <angel@acsq.me> Signed-off-by: Koni Marti <koni.marti@gmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
* binds: parse annotations from keybind configKoni Marti2024-02-111-0/+7
| | | | | | | | | | | | | | | | | | | | | Parse inline comments in binds.conf as annotations to the corresponding keybinds. Note that a space is required before the comment symbol, so the comment delimiter is " # ". Example: p = :postpone<Enter> # I'll work on it later where "I'll work on it later" is the annotation. When a comment symbol ("#") is needed in the value part of the keybind, it should be escaped ("\#"). Comment symbols can be used without restriction in the annotation itself. Signed-off-by: Koni Marti <koni.marti@gmail.com> Tested-by: Bence Ferdinandy <bence@ferdinandy.com> Reviewed-by: Bence Ferdinandy <bence@ferdinandy.com> Acked-by: Robin Jarry <robin@jarry.cc>
* commands: rename patch delete to patch unlinkKoni Marti2024-01-311-5/+4
| | | | | | | | | | | Rename the command :patch delete to :patch unlink. This expresses the "link" between the project data within aerc and the underlying repository better. :patch unlink does not delete anything in the repository, it only removes the metadata about currently applied patch revisions/tags. Signed-off-by: Koni Marti <koni.marti@gmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
* templates: fix typo in the docsKarel Balej2024-01-311-1/+1
| | | | | | | | | | Replace the typo with a correct word for the description of the OriginalDate template variable to make sense. Signed-off-by: Karel Balej <balejk@matfyz.cz> Acked-by: Moritz Poldrack <moritz@poldrack.dev> Acked-by: Robin Jarry <robin@jarry.cc>
* commands: rename patch remove to patch dropKoni Marti2024-01-311-6/+6
| | | | | | | | Rename the :patch remove command to :patch drop to better express the this operation is the counter-part to :patch apply. Signed-off-by: Koni Marti <koni.marti@gmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
* menu: use listbox as fallback commandKoni Marti2024-01-291-0/+4
| | | | | | | | | | | | Implement the listbox widget as fallback picker when no command to :menu was specified or the command cannot be found in PATH. The listbox will also be used with "-" as the shell command: :menu -c "-" -d :cf Signed-off-by: Koni Marti <koni.marti@gmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
* ui: allow thread arrow customizationinwit2024-01-291-0/+123
| | | | | | | | | | | | | | | | | | The thread prefix appearance is inspired by mutt and has been regarded by some as too wide and not very aesthetically pleasing. Nevertheless, it has some technical limitations, like not being able to show if a thread is folded. Allow for full customisation of the thread prefix by introducing 14 new config options. Dirlist is not affected. Changelog-added: Thread arrow prefixes are now fully configurable. Co-authored-by: Robin Jarry <robin@jarry.cc> Signed-off-by: inwit <inwit@sindominio.net> Tested-by: Koni Marti <koni.marti@gmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
* doc: make sure aliases have the same signatureBence Ferdinandy2024-01-271-2/+2
| | | | | | | | | Two aliases did not have the same signature as the main command. Add the missing signatures. Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com> Acked-by: Robin Jarry <robin@jarry.cc>
* help: add :man as aliasBence Ferdinandy2024-01-271-2/+4
| | | | | | | | Since except for :help keys, we literally open man with the appropriate aerc manpages, it makes sense to have that as an alias. Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com> Acked-by: Robin Jarry <robin@jarry.cc>
* bindings: do not systematically trigger completionRobin Jarry2024-01-271-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When simulating keystrokes of a binding, the command completion is disabled momentarily for performance reasons and re-enabled once the sequence is finished. See commit 055c6dc6604f ("exline: don't draw completions for keybinds") for more details. Since commit 0b0095eeadaf ("complete: allow disabling automatic completion"), it is possible to only rely on explicit keystrokes to display the completion menu. With the default settings, if a key sequence contains more than [ui].completion-min-chars, it should trigger completion after [ui].completion-delay. But since the completion was disabled when the keystrokes are input, it does not trigger the completion. To work around this, an artificial <Tab> keystroke was added at the end of the sequence to force trigger the completion menu. For more details, see commit 04869bd2a39a ("aerc: fix popover menu regression"). The workaround that was added, along with commit b3dc63d69c14 ("complete: only display popover for more than one choice"), forces the completion when there is a single choice. Completely ignoring [ui].completion-min-chars = manual. Only explicitly trigger the completion if the completion key was seen in the keystroke sequence or if completion-min-chars is not set to manual. Use the correct completion key and not hard code Tab. Fixes: 0b0095eeadaf ("complete: allow disabling automatic completion") Fixes: https://todo.sr.ht/~rjarry/aerc/210 References: https://todo.sr.ht/~rjarry/aerc/104 Cc: Skejg <grolleman@zoho.com> Reported-by: Karel Balej <balejk@matfyz.cz> Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Karel Balej <balejk@matfyz.cz> Tested-by: Koni Marti <koni.marti@gmail.com>
* flags: add support for draft flagJason Cox2024-01-264-2/+12
| | | | | | | | | | | | | | Support the draft flag wherever flags are used. Automatically set it when postponing a message, and allow recalling a message without the -f flag if it has the draft flag set, regardless of what folder it's in. Notmuch doesn't seem to pick up on the draft flag when indexing even though the flag is set on the maildir file. Explicitly set all tags corresponding to set flags when appending a message in notmuch. Changelog-added: Support the `draft` flag. Signed-off-by: Jason Cox <me@jasoncarloscox.com> Acked-by: Robin Jarry <robin@jarry.cc>
* mv: allow to move messages across accountsJohannes Thyssen Tishman2024-01-251-4/+7
| | | | | | | | | | | | Add a new -a flag to :mv. When specified, an account name is required before the folder name. If the destination folder doesn't exist, it will be created whether or not the -p flag is specified. Changelog-added: Move messages across accounts with `:mv -a <account> <folder>`. Signed-off-by: Johannes Thyssen Tishman <johannes@thyssentishman.com> Acked-by: Robin Jarry <robin@jarry.cc>
* cp: allow to copy messages across accountsJohannes Thyssen Tishman2024-01-251-4/+7
| | | | | | | | | | | | Add a new -a flag to :cp. When specified, an account name is required before the folder name. If the destination folder doesn't exist, it will be created whether or not the -p flag is specified. Changelog-added: Copy messages across accounts with `:cp -a <account> <folder>`. Signed-off-by: Johannes Thyssen Tishman <johannes@thyssentishman.com> Acked-by: Robin Jarry <robin@jarry.cc>
* hook: add mail-sent hookMoritz Poldrack2024-01-251-0/+18
| | | | | | | | | Add a hook to trigger when a message is sent. References: https://todo.sr.ht/~rjarry/aerc/136 Signed-off-by: Moritz Poldrack <git@moritz.sh> Tested-by: Bence Ferdinandy <bence@ferdinandy.com> Acked-by: Robin Jarry <robin@jarry.cc>
* compose: allow automatic attachment of signing keyRobin Jarry2024-01-251-0/+5
| | | | | | | | | | | | | | | | | | Add a new pgp-attach-key boolean setting in accounts.conf. When set to true, enabling message signing (either automatically via pgp-auto-sign or manually with :sign) will imply attaching the (public) key that will be used to sign the message before sending. The automatically attached key can be unattached like any other attachment with :detach. Implements: https://todo.sr.ht/~rjarry/aerc/207 Changelog-added: Automatically attach signing key with `pgp-attach-key` in `accounts.conf`. Requested-by: Drew Devault <sir@cmpwn.com> Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Thomas Böhler <witcher@wiredspace.de> Reviewed-by: Thomas Böhler <witcher@wiredspace.de>
* main: add flags to override config filesBence Ferdinandy2024-01-214-3/+18
| | | | | | | | | | | | Add --aerc-conf, --binds-conf and --accounts-conf CLI flags, which respectively override the default aerc.conf, binds.conf and accounts.conf configuration files. If the specified files do not exist or cannot be read, exit with an error. Implements: https://todo.sr.ht/~rjarry/aerc/209 Changelog-added: CLI flags to override paths to config files. Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com> Acked-by: Robin Jarry <robin@jarry.cc>
* commands: add menuRobin Jarry2024-01-202-0/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new :menu command that can be used to spawn a shell command in an interactive dialog and execute aerc commands for each of the lines printed on its standard output like xargs(1) would do in a shell. The shell command can be configured in aerc.conf under [general].default-menu-cmd and overridden via the :menu -c <cmd> option. There are two flags to provide input text to the shell command which can be useful in combination with other aerc commands: -a: All account names, one per line: '<account>' LF -d: All current account directory names, one per line: '<directory>' LF -ad: All directories of all accounts, one per line: '<account>' '<directory>' LF Here are some examples: :menu -adc fzf :cf -a :menu -c 'fzf --multi' :attach :menu -dc 'fzf --multi' :cp And also for key bindings: <C-p> = :menu -adc fzf :cf -a<Enter> Changelog-added: New `:menu` command to invoke other aerc commands based on a shell command output. Signed-off-by: Robin Jarry <robin@jarry.cc> Tested-by: Bence Ferdinandy <bence@ferdinandy.com> Tested-by: Johannes Thyssen Tishman <johannes@thyssentishman.com>
* templates: add basic string functionsMoritz Poldrack2024-01-191-0/+35
| | | | | | | | | | | | | Some clients are sending a text/plain part that contains nothing but the text/html part. This is rather suboptimal when replying. To be able to filter these, it is important to be able to detect things like <!doctype html>. Add basic string operations to the template functions. Signed-off-by: Moritz Poldrack <git@moritz.sh> Tested-by: Koni Marti <koni.marti@gmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
* doc: fix typo in aerc-tutorialRobin Jarry2024-01-061-1/+1
| | | | | | | There's no colorized filter. Fixes: c56e938f9c82 ("doc: proofreading") Signed-off-by: Robin Jarry <robin@jarry.cc>
* templates: add full path of file(s) as Filename(s)Bence Ferdinandy2023-12-311-0/+10
| | | | | | | | | | | | | For the maildir and notmuch backends, add the full path of the message as Filename to templates. In case of a notmuch message having multiple files associated with it, it returns a random path. Also add Filenames to templates, which is a list of all associated message paths. This is relevant for the notmuch backend, where a single messages is shown, if there are multiple copies of it. Changelog-added: Add filepath to messages in templates as .Filename(s) Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com> Acked-by: Robin Jarry <robin@jarry.cc>
* patch/find: add find sub-cmdKoni Marti2023-12-301-0/+10
| | | | | | | | Implement the :patch find command. Search and filter for a given commit by subject line in the current accout and current folder. Signed-off-by: Koni Marti <koni.marti@gmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
* patch: implement worktree supportKoni Marti2023-12-301-7/+25
| | | | | | | | | | | | | | | | | | | | | | Implement worktree support for the patch management. Use ":patch apply -w <commit-ish> <tag>" to create a new worktree and apply the selected messages to it. The worktree is linked to repo in the current project. Internally, the worktree is stored as a new project. When this project is deleted with ":patch delete", the underlying linked worktree is removed as well. ":patch list" shows when a project is a worktree and to what project it is linked to. Worktrees enable the users to create a new copy of the repo at a given commit and apply patches without interrupting the current work in the base repo. Signed-off-by: Koni Marti <koni.marti@gmail.com> Acked-by: Robin Jarry <robin@jarry.cc>
generated by cgit (git 2.34.1) at 2024-11-16 08:30:36 +0000