diff options
Diffstat (limited to 'plumbing/format/packp/doc.go')
| -rw-r--r-- | plumbing/format/packp/doc.go | 724 |
1 files changed, 0 insertions, 724 deletions
diff --git a/plumbing/format/packp/doc.go b/plumbing/format/packp/doc.go deleted file mode 100644 index 4950d1d..0000000 --- a/plumbing/format/packp/doc.go +++ /dev/null @@ -1,724 +0,0 @@ -package packp - -/* - -A nice way to trace the real data transmitted and received by git, use: - -GIT_TRACE_PACKET=true git ls-remote http://github.com/src-d/go-git -GIT_TRACE_PACKET=true git clone http://github.com/src-d/go-git - -Here follows a copy of the current protocol specification at the time of -this writing. - -(Please notice that most http git servers will add a flush-pkt after the -first pkt-line when using HTTP smart.) - - -Documentation Common to Pack and Http Protocols -=============================================== - -ABNF Notation -------------- - -ABNF notation as described by RFC 5234 is used within the protocol documents, -except the following replacement core rules are used: ----- - HEXDIG = DIGIT / "a" / "b" / "c" / "d" / "e" / "f" ----- - -We also define the following common rules: ----- - NUL = %x00 - zero-id = 40*"0" - obj-id = 40*(HEXDIGIT) - - refname = "HEAD" - refname /= "refs/" <see discussion below> ----- - -A refname is a hierarchical octet string beginning with "refs/" and -not violating the 'git-check-ref-format' command's validation rules. -More specifically, they: - -. They can include slash `/` for hierarchical (directory) - grouping, but no slash-separated component can begin with a - dot `.`. - -. They must contain at least one `/`. This enforces the presence of a - category like `heads/`, `tags/` etc. but the actual names are not - restricted. - -. They cannot have two consecutive dots `..` anywhere. - -. They cannot have ASCII control characters (i.e. bytes whose - values are lower than \040, or \177 `DEL`), space, tilde `~`, - caret `^`, colon `:`, question-mark `?`, asterisk `*`, - or open bracket `[` anywhere. - -. They cannot end with a slash `/` or a dot `.`. - -. They cannot end with the sequence `.lock`. - -. They cannot contain a sequence `@{`. - -. They cannot contain a `\\`. - - -pkt-line Format ---------------- - -Much (but not all) of the payload is described around pkt-lines. - -A pkt-line is a variable length binary string. The first four bytes -of the line, the pkt-len, indicates the total length of the line, -in hexadecimal. The pkt-len includes the 4 bytes used to contain -the length's hexadecimal representation. - -A pkt-line MAY contain binary data, so implementors MUST ensure -pkt-line parsing/formatting routines are 8-bit clean. - -A non-binary line SHOULD BE terminated by an LF, which if present -MUST be included in the total length. Receivers MUST treat pkt-lines -with non-binary data the same whether or not they contain the trailing -LF (stripping the LF if present, and not complaining when it is -missing). - -The maximum length of a pkt-line's data component is 65516 bytes. -Implementations MUST NOT send pkt-line whose length exceeds 65520 -(65516 bytes of payload + 4 bytes of length data). - -Implementations SHOULD NOT send an empty pkt-line ("0004"). - -A pkt-line with a length field of 0 ("0000"), called a flush-pkt, -is a special case and MUST be handled differently than an empty -pkt-line ("0004"). - ----- - pkt-line = data-pkt / flush-pkt - - data-pkt = pkt-len pkt-payload - pkt-len = 4*(HEXDIG) - pkt-payload = (pkt-len - 4)*(OCTET) - - flush-pkt = "0000" ----- - -Examples (as C-style strings): - ----- - pkt-line actual value - --------------------------------- - "0006a\n" "a\n" - "0005a" "a" - "000bfoobar\n" "foobar\n" - "0004" "" ----- - -Packfile transfer protocols -=========================== - -Git supports transferring data in packfiles over the ssh://, git://, http:// and -file:// transports. There exist two sets of protocols, one for pushing -data from a client to a server and another for fetching data from a -server to a client. The three transports (ssh, git, file) use the same -protocol to transfer data. http is documented in http-protocol.txt. - -The processes invoked in the canonical Git implementation are 'upload-pack' -on the server side and 'fetch-pack' on the client side for fetching data; -then 'receive-pack' on the server and 'send-pack' on the client for pushing -data. The protocol functions to have a server tell a client what is -currently on the server, then for the two to negotiate the smallest amount -of data to send in order to fully update one or the other. - -pkt-line Format ---------------- - -The descriptions below build on the pkt-line format described in -protocol-common.txt. When the grammar indicate `PKT-LINE(...)`, unless -otherwise noted the usual pkt-line LF rules apply: the sender SHOULD -include a LF, but the receiver MUST NOT complain if it is not present. - -Transports ----------- -There are three transports over which the packfile protocol is -initiated. The Git transport is a simple, unauthenticated server that -takes the command (almost always 'upload-pack', though Git -servers can be configured to be globally writable, in which 'receive- -pack' initiation is also allowed) with which the client wishes to -communicate and executes it and connects it to the requesting -process. - -In the SSH transport, the client just runs the 'upload-pack' -or 'receive-pack' process on the server over the SSH protocol and then -communicates with that invoked process over the SSH connection. - -The file:// transport runs the 'upload-pack' or 'receive-pack' -process locally and communicates with it over a pipe. - -Git Transport -------------- - -The Git transport starts off by sending the command and repository -on the wire using the pkt-line format, followed by a NUL byte and a -hostname parameter, terminated by a NUL byte. - - 0032git-upload-pack /project.git\0host=myserver.com\0 - --- - git-proto-request = request-command SP pathname NUL [ host-parameter NUL ] - request-command = "git-upload-pack" / "git-receive-pack" / - "git-upload-archive" ; case sensitive - pathname = *( %x01-ff ) ; exclude NUL - host-parameter = "host=" hostname [ ":" port ] --- - -Only host-parameter is allowed in the git-proto-request. Clients -MUST NOT attempt to send additional parameters. It is used for the -git-daemon name based virtual hosting. See --interpolated-path -option to git daemon, with the %H/%CH format characters. - -Basically what the Git client is doing to connect to an 'upload-pack' -process on the server side over the Git protocol is this: - - $ echo -e -n \ - "0039git-upload-pack /schacon/gitbook.git\0host=example.com\0" | - nc -v example.com 9418 - -If the server refuses the request for some reasons, it could abort -gracefully with an error message. - ----- - error-line = PKT-LINE("ERR" SP explanation-text) ----- - - -SSH Transport -------------- - -Initiating the upload-pack or receive-pack processes over SSH is -executing the binary on the server via SSH remote execution. -It is basically equivalent to running this: - - $ ssh git.example.com "git-upload-pack '/project.git'" - -For a server to support Git pushing and pulling for a given user over -SSH, that user needs to be able to execute one or both of those -commands via the SSH shell that they are provided on login. On some -systems, that shell access is limited to only being able to run those -two commands, or even just one of them. - -In an ssh:// format URI, it's absolute in the URI, so the '/' after -the host name (or port number) is sent as an argument, which is then -read by the remote git-upload-pack exactly as is, so it's effectively -an absolute path in the remote filesystem. - - git clone ssh://user@example.com/project.git - | - v - ssh user@example.com "git-upload-pack '/project.git'" - -In a "user@host:path" format URI, its relative to the user's home -directory, because the Git client will run: - - git clone user@example.com:project.git - | - v - ssh user@example.com "git-upload-pack 'project.git'" - -The exception is if a '~' is used, in which case -we execute it without the leading '/'. - - ssh://user@example.com/~alice/project.git, - | - v - ssh user@example.com "git-upload-pack '~alice/project.git'" - -A few things to remember here: - -- The "command name" is spelled with dash (e.g. git-upload-pack), but - this can be overridden by the client; - -- The repository path is always quoted with single quotes. - -Fetching Data From a Server ---------------------------- - -When one Git repository wants to get data that a second repository -has, the first can 'fetch' from the second. This operation determines -what data the server has that the client does not then streams that -data down to the client in packfile format. - - -Reference Discovery -------------------- - -When the client initially connects the server will immediately respond -with a listing of each reference it has (all branches and tags) along -with the object name that each reference currently points to. - - $ echo -e -n "0039git-upload-pack /schacon/gitbook.git\0host=example.com\0" | - nc -v example.com 9418 - 00887217a7c7e582c46cec22a130adf4b9d7d950fba0 HEAD\0multi_ack thin-pack - side-band side-band-64k ofs-delta shallow no-progress include-tag - 00441d3fcd5ced445d1abc402225c0b8a1299641f497 refs/heads/integration - 003f7217a7c7e582c46cec22a130adf4b9d7d950fba0 refs/heads/master - 003cb88d2441cac0977faf98efc80305012112238d9d refs/tags/v0.9 - 003c525128480b96c89e6418b1e40909bf6c5b2d580f refs/tags/v1.0 - 003fe92df48743b7bc7d26bcaabfddde0a1e20cae47c refs/tags/v1.0^{} - 0000 - -The returned response is a pkt-line stream describing each ref and -its current value. The stream MUST be sorted by name according to -the C locale ordering. - -If HEAD is a valid ref, HEAD MUST appear as the first advertised -ref. If HEAD is not a valid ref, HEAD MUST NOT appear in the -advertisement list at all, but other refs may still appear. - -The stream MUST include capability declarations behind a NUL on the -first ref. The peeled value of a ref (that is "ref^{}") MUST be -immediately after the ref itself, if presented. A conforming server -MUST peel the ref if it's an annotated tag. - ----- - advertised-refs = (no-refs / list-of-refs) - *shallow - flush-pkt - - no-refs = PKT-LINE(zero-id SP "capabilities^{}" - NUL capability-list) - - list-of-refs = first-ref *other-ref - first-ref = PKT-LINE(obj-id SP refname - NUL capability-list) - - other-ref = PKT-LINE(other-tip / other-peeled) - other-tip = obj-id SP refname - other-peeled = obj-id SP refname "^{}" - - shallow = PKT-LINE("shallow" SP obj-id) - - capability-list = capability *(SP capability) - capability = 1*(LC_ALPHA / DIGIT / "-" / "_") - LC_ALPHA = %x61-7A ----- - -Server and client MUST use lowercase for obj-id, both MUST treat obj-id -as case-insensitive. - -See protocol-capabilities.txt for a list of allowed server capabilities -and descriptions. - -Packfile Negotiation --------------------- -After reference and capabilities discovery, the client can decide to -terminate the connection by sending a flush-pkt, telling the server it can -now gracefully terminate, and disconnect, when it does not need any pack -data. This can happen with the ls-remote command, and also can happen when -the client already is up-to-date. - -Otherwise, it enters the negotiation phase, where the client and -server determine what the minimal packfile necessary for transport is, -by telling the server what objects it wants, its shallow objects -(if any), and the maximum commit depth it wants (if any). The client -will also send a list of the capabilities it wants to be in effect, -out of what the server said it could do with the first 'want' line. - ----- - upload-request = want-list - *shallow-line - *1depth-request - flush-pkt - - want-list = first-want - *additional-want - - shallow-line = PKT-LINE("shallow" SP obj-id) - - depth-request = PKT-LINE("deepen" SP depth) / - PKT-LINE("deepen-since" SP timestamp) / - PKT-LINE("deepen-not" SP ref) - - first-want = PKT-LINE("want" SP obj-id SP capability-list) - additional-want = PKT-LINE("want" SP obj-id) - - depth = 1*DIGIT ----- - -Clients MUST send all the obj-ids it wants from the reference -discovery phase as 'want' lines. Clients MUST send at least one -'want' command in the request body. Clients MUST NOT mention an -obj-id in a 'want' command which did not appear in the response -obtained through ref discovery. - -The client MUST write all obj-ids which it only has shallow copies -of (meaning that it does not have the parents of a commit) as -'shallow' lines so that the server is aware of the limitations of -the client's history. - -The client now sends the maximum commit history depth it wants for -this transaction, which is the number of commits it wants from the -tip of the history, if any, as a 'deepen' line. A depth of 0 is the -same as not making a depth request. The client does not want to receive -any commits beyond this depth, nor does it want objects needed only to -complete those commits. Commits whose parents are not received as a -result are defined as shallow and marked as such in the server. This -information is sent back to the client in the next step. - -Once all the 'want's and 'shallow's (and optional 'deepen') are -transferred, clients MUST send a flush-pkt, to tell the server side -that it is done sending the list. - -Otherwise, if the client sent a positive depth request, the server -will determine which commits will and will not be shallow and -send this information to the client. If the client did not request -a positive depth, this step is skipped. - ----- - shallow-update = *shallow-line - *unshallow-line - flush-pkt - - shallow-line = PKT-LINE("shallow" SP obj-id) - - unshallow-line = PKT-LINE("unshallow" SP obj-id) ----- - -If the client has requested a positive depth, the server will compute -the set of commits which are no deeper than the desired depth. The set -of commits start at the client's wants. - -The server writes 'shallow' lines for each -commit whose parents will not be sent as a result. The server writes -an 'unshallow' line for each commit which the client has indicated is -shallow, but is no longer shallow at the currently requested depth -(that is, its parents will now be sent). The server MUST NOT mark -as unshallow anything which the client has not indicated was shallow. - -Now the client will send a list of the obj-ids it has using 'have' -lines, so the server can make a packfile that only contains the objects -that the client needs. In multi_ack mode, the canonical implementation -will send up to 32 of these at a time, then will send a flush-pkt. The -canonical implementation will skip ahead and send the next 32 immediately, -so that there is always a block of 32 "in-flight on the wire" at a time. - ----- - upload-haves = have-list - compute-end - - have-list = *have-line - have-line = PKT-LINE("have" SP obj-id) - compute-end = flush-pkt / PKT-LINE("done") ----- - -If the server reads 'have' lines, it then will respond by ACKing any -of the obj-ids the client said it had that the server also has. The -server will ACK obj-ids differently depending on which ack mode is -chosen by the client. - -In multi_ack mode: - - * the server will respond with 'ACK obj-id continue' for any common - commits. - - * once the server has found an acceptable common base commit and is - ready to make a packfile, it will blindly ACK all 'have' obj-ids - back to the client. - - * the server will then send a 'NAK' and then wait for another response - from the client - either a 'done' or another list of 'have' lines. - -In multi_ack_detailed mode: - - * the server will differentiate the ACKs where it is signaling - that it is ready to send data with 'ACK obj-id ready' lines, and - signals the identified common commits with 'ACK obj-id common' lines. - -Without either multi_ack or multi_ack_detailed: - - * upload-pack sends "ACK obj-id" on the first common object it finds. - After that it says nothing until the client gives it a "done". - - * upload-pack sends "NAK" on a flush-pkt if no common object - has been found yet. If one has been found, and thus an ACK - was already sent, it's silent on the flush-pkt. - -After the client has gotten enough ACK responses that it can determine -that the server has enough information to send an efficient packfile -(in the canonical implementation, this is determined when it has received -enough ACKs that it can color everything left in the --date-order queue -as common with the server, or the --date-order queue is empty), or the -client determines that it wants to give up (in the canonical implementation, -this is determined when the client sends 256 'have' lines without getting -any of them ACKed by the server - meaning there is nothing in common and -the server should just send all of its objects), then the client will send -a 'done' command. The 'done' command signals to the server that the client -is ready to receive its packfile data. - -However, the 256 limit *only* turns on in the canonical client -implementation if we have received at least one "ACK %s continue" -during a prior round. This helps to ensure that at least one common -ancestor is found before we give up entirely. - -Once the 'done' line is read from the client, the server will either -send a final 'ACK obj-id' or it will send a 'NAK'. 'obj-id' is the object -name of the last commit determined to be common. The server only sends -ACK after 'done' if there is at least one common base and multi_ack or -multi_ack_detailed is enabled. The server always sends NAK after 'done' -if there is no common base found. - -Then the server will start sending its packfile data. - ----- - server-response = *ack_multi ack / nak - ack_multi = PKT-LINE("ACK" SP obj-id ack_status) - ack_status = "continue" / "common" / "ready" - ack = PKT-LINE("ACK" SP obj-id) - nak = PKT-LINE("NAK") ----- - -A simple clone may look like this (with no 'have' lines): - ----- - C: 0054want 74730d410fcb6603ace96f1dc55ea6196122532d multi_ack \ - side-band-64k ofs-delta\n - C: 0032want 7d1665144a3a975c05f1f43902ddaf084e784dbe\n - C: 0032want 5a3f6be755bbb7deae50065988cbfa1ffa9ab68a\n - C: 0032want 7e47fe2bd8d01d481f44d7af0531bd93d3b21c01\n - C: 0032want 74730d410fcb6603ace96f1dc55ea6196122532d\n - C: 0000 - C: 0009done\n - - S: 0008NAK\n - S: [PACKFILE] ----- - -An incremental update (fetch) response might look like this: - ----- - C: 0054want 74730d410fcb6603ace96f1dc55ea6196122532d multi_ack \ - side-band-64k ofs-delta\n - C: 0032want 7d1665144a3a975c05f1f43902ddaf084e784dbe\n - C: 0032want 5a3f6be755bbb7deae50065988cbfa1ffa9ab68a\n - C: 0000 - C: 0032have 7e47fe2bd8d01d481f44d7af0531bd93d3b21c01\n - C: [30 more have lines] - C: 0032have 74730d410fcb6603ace96f1dc55ea6196122532d\n - C: 0000 - - S: 003aACK 7e47fe2bd8d01d481f44d7af0531bd93d3b21c01 continue\n - S: 003aACK 74730d410fcb6603ace96f1dc55ea6196122532d continue\n - S: 0008NAK\n - - C: 0009done\n - - S: 0031ACK 74730d410fcb6603ace96f1dc55ea6196122532d\n - S: [PACKFILE] ----- - - -Packfile Data -------------- - -Now that the client and server have finished negotiation about what -the minimal amount of data that needs to be sent to the client is, the server -will construct and send the required data in packfile format. - -See pack-format.txt for what the packfile itself actually looks like. - -If 'side-band' or 'side-band-64k' capabilities have been specified by -the client, the server will send the packfile data multiplexed. - -Each packet starting with the packet-line length of the amount of data -that follows, followed by a single byte specifying the sideband the -following data is coming in on. - -In 'side-band' mode, it will send up to 999 data bytes plus 1 control -code, for a total of up to 1000 bytes in a pkt-line. In 'side-band-64k' -mode it will send up to 65519 data bytes plus 1 control code, for a -total of up to 65520 bytes in a pkt-line. - -The sideband byte will be a '1', '2' or a '3'. Sideband '1' will contain -packfile data, sideband '2' will be used for progress information that the -client will generally print to stderr and sideband '3' is used for error -information. - -If no 'side-band' capability was specified, the server will stream the -entire packfile without multiplexing. - - -Pushing Data To a Server ------------------------- - -Pushing data to a server will invoke the 'receive-pack' process on the -server, which will allow the client to tell it which references it should -update and then send all the data the server will need for those new -references to be complete. Once all the data is received and validated, -the server will then update its references to what the client specified. - -Authentication --------------- - -The protocol itself contains no authentication mechanisms. That is to be -handled by the transport, such as SSH, before the 'receive-pack' process is -invoked. If 'receive-pack' is configured over the Git transport, those -repositories will be writable by anyone who can access that port (9418) as -that transport is unauthenticated. - -Reference Discovery -------------------- - -The reference discovery phase is done nearly the same way as it is in the -fetching protocol. Each reference obj-id and name on the server is sent -in packet-line format to the client, followed by a flush-pkt. The only -real difference is that the capability listing is different - the only -possible values are 'report-status', 'delete-refs', 'ofs-delta' and -'push-options'. - -Reference Update Request and Packfile Transfer ----------------------------------------------- - -Once the client knows what references the server is at, it can send a -list of reference update requests. For each reference on the server -that it wants to update, it sends a line listing the obj-id currently on -the server, the obj-id the client would like to update it to and the name -of the reference. - -This list is followed by a flush-pkt. Then the push options are transmitted -one per packet followed by another flush-pkt. After that the packfile that -should contain all the objects that the server will need to complete the new -references will be sent. - ----- - update-request = *shallow ( command-list | push-cert ) [packfile] - - shallow = PKT-LINE("shallow" SP obj-id) - - command-list = PKT-LINE(command NUL capability-list) - *PKT-LINE(command) - flush-pkt - - command = create / delete / update - create = zero-id SP new-id SP name - delete = old-id SP zero-id SP name - update = old-id SP new-id SP name - - old-id = obj-id - new-id = obj-id - - push-cert = PKT-LINE("push-cert" NUL capability-list LF) - PKT-LINE("certificate version 0.1" LF) - PKT-LINE("pusher" SP ident LF) - PKT-LINE("pushee" SP url LF) - PKT-LINE("nonce" SP nonce LF) - PKT-LINE(LF) - *PKT-LINE(command LF) - *PKT-LINE(gpg-signature-lines LF) - PKT-LINE("push-cert-end" LF) - - packfile = "PACK" 28*(OCTET) ----- - -If the receiving end does not support delete-refs, the sending end MUST -NOT ask for delete command. - -If the receiving end does not support push-cert, the sending end -MUST NOT send a push-cert command. When a push-cert command is -sent, command-list MUST NOT be sent; the commands recorded in the -push certificate is used instead. - -The packfile MUST NOT be sent if the only command used is 'delete'. - -A packfile MUST be sent if either create or update command is used, -even if the server already has all the necessary objects. In this -case the client MUST send an empty packfile. The only time this -is likely to happen is if the client is creating -a new branch or a tag that points to an existing obj-id. - -The server will receive the packfile, unpack it, then validate each -reference that is being updated that it hasn't changed while the request -was being processed (the obj-id is still the same as the old-id), and -it will run any update hooks to make sure that the update is acceptable. -If all of that is fine, the server will then update the references. - -Push Certificate ----------------- - -A push certificate begins with a set of header lines. After the -header and an empty line, the protocol commands follow, one per -line. Note that the trailing LF in push-cert PKT-LINEs is _not_ -optional; it must be present. - -Currently, the following header fields are defined: - -`pusher` ident:: - Identify the GPG key in "Human Readable Name <email@address>" - format. - -`pushee` url:: - The repository URL (anonymized, if the URL contains - authentication material) the user who ran `git push` - intended to push into. - -`nonce` nonce:: - The 'nonce' string the receiving repository asked the - pushing user to include in the certificate, to prevent - replay attacks. - -The GPG signature lines are a detached signature for the contents -recorded in the push certificate before the signature block begins. -The detached signature is used to certify that the commands were -given by the pusher, who must be the signer. - -Report Status -------------- - -After receiving the pack data from the sender, the receiver sends a -report if 'report-status' capability is in effect. -It is a short listing of what happened in that update. It will first -list the status of the packfile unpacking as either 'unpack ok' or -'unpack [error]'. Then it will list the status for each of the references -that it tried to update. Each line is either 'ok [refname]' if the -update was successful, or 'ng [refname] [error]' if the update was not. - ----- - report-status = unpack-status - 1*(command-status) - flush-pkt - - unpack-status = PKT-LINE("unpack" SP unpack-result) - unpack-result = "ok" / error-msg - - command-status = command-ok / command-fail - command-ok = PKT-LINE("ok" SP refname) - command-fail = PKT-LINE("ng" SP refname SP error-msg) - - error-msg = 1*(OCTECT) ; where not "ok" ----- - -Updates can be unsuccessful for a number of reasons. The reference can have -changed since the reference discovery phase was originally sent, meaning -someone pushed in the meantime. The reference being pushed could be a -non-fast-forward reference and the update hooks or configuration could be -set to not allow that, etc. Also, some references can be updated while others -can be rejected. - -An example client/server communication might look like this: - ----- - S: 007c74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/local\0report-status delete-refs ofs-delta\n - S: 003e7d1665144a3a975c05f1f43902ddaf084e784dbe refs/heads/debug\n - S: 003f74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/master\n - S: 003f74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/team\n - S: 0000 - - C: 003e7d1665144a3a975c05f1f43902ddaf084e784dbe 74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/debug\n - C: 003e74730d410fcb6603ace96f1dc55ea6196122532d 5a3f6be755bbb7deae50065988cbfa1ffa9ab68a refs/heads/master\n - C: 0000 - C: [PACKDATA] - - S: 000eunpack ok\n - S: 0018ok refs/heads/debug\n - S: 002ang refs/heads/master non-fast-forward\n ----- -*/ |