// Package common implements the git pack protocol with a pluggable transport.
// This is a low-level package to implement new transports. Use a concrete
// implementation instead (e.g. http, file, ssh).
//
// A simple example of usage can be found in the file package.
package common
import (
"bufio"
"errors"
"fmt"
"io"
"strings"
"time"
"srcd.works/go-git.v4/plumbing/format/pktline"
"srcd.works/go-git.v4/plumbing/protocol/packp"
"srcd.works/go-git.v4/plumbing/protocol/packp/capability"
"srcd.works/go-git.v4/plumbing/transport"
"srcd.works/go-git.v4/utils/ioutil"
)
const (
readErrorSecondsTimeout = 10
errLinesBuffer = 1000
)
var (
ErrTimeoutExceeded = errors.New("timeout exceeded")
)
// Commander creates Command instances. This is the main entry point for
// transport implementations.
type Commander interface {
// Command creates a new Command for the given git command and
// endpoint. cmd can be git-upload-pack or git-receive-pack. An
// error should be returned if the endpoint is not supported or the
// command cannot be created (e.g. binary does not exist, connection
// cannot be established).
Command(cmd string, ep transport.Endpoint, auth transport.AuthMethod) (Command, error)
}
// Command is used for a single command execution.
// This interface is modeled after exec.Cmd and ssh.Session in the standard
// library.
type Command interface {
// StderrPipe returns a pipe that will be connected to the command's
// standard error when the command starts. It should not be called after
// Start.
StderrPipe() (io.Reader, error)
// StdinPipe returns a pipe that will be connected to the command's
// standard input when the command starts. It should not be called after
// Start. The pipe should be closed when no more input is expected.
StdinPipe() (io.WriteCloser, error)
// StdoutPipe returns a pipe that will be connected to the command's
// standard output when the command starts. It should not be called after
// Start.
StdoutPipe() (io.Reader, error)
// Start starts the specified command. It does not wait for it to
// complete.
Start() error
// Wait waits for the command to exit. It must have been started by
// Start. The returned error is nil if the command runs, has no
// problems copying stdin, stdout, and stderr, and exits with a zero
// exit status.
Wait() error
// Close closes the command and releases any resources used by it. It
// can be called to forcibly finish the command without calling to Wait
// or to release resources after calling Wait.
Close() error
}
type client struct {
cmdr Commander
}
// NewClient creates a new client using the given Commander.
func NewClient(runner Commander) transport.Transport {
return &client{runner}
}
// NewUploadPackSession creates a new UploadPackSession.
func (c *client) NewUploadPackSession(ep transport.Endpoint, auth transport.AuthMethod) (
transport.UploadPackSession, error) {
return c.newSession(transport.UploadPackServiceName, ep, auth)
}
// NewReceivePackSession creates a new ReceivePackSession.
func (c *client) NewReceivePackSession(ep transport.Endpoint, auth transport.AuthMethod) (
transport.ReceivePackSession, error) {
return c.newSession(transport.ReceivePackServiceName, ep, auth)
}
type session struct {
Stdin io.WriteCloser
Stdout io.Reader
Command Command
isReceivePack bool
advRefs *packp.AdvRefs
packRun bool
finished bool
errLines chan string
}
func (c *client) newSession(s string, ep transport.Endpoint, auth transport.AuthMethod) (*session, error) {
cmd, err := c.cmdr.Command(s, ep, auth)
if err != nil {
return nil, err
}
stdin, err := cmd.StdinPipe()
if err != nil {
return nil, err
}
stdout, err := cmd.StdoutPipe()
if err != nil {
return nil, err
}
stderr, err := cmd.StderrPipe()
if err != nil {
return nil, err
}
if err := cmd.Start(); err != nil {
return nil, err
}
return &session{
Stdin: stdin,
Stdout: stdout,
Command: cmd,
errLines: c.listenErrors(stderr),
isReceivePack: s == transport.ReceivePackServiceName,
}, nil
}
func (c *client) listenErrors(r io.Reader) chan string {
if r == nil {
return nil
}
errLines := make(chan string, errLinesBuffer)
go func() {
s := bufio.NewScanner(r)
for s.Scan() {
line := string(s.Bytes())
errLines <- line
}
}()
return errLines
}
// AdvertisedReferences retrieves the advertised references from the server.
func (s *session) AdvertisedReferences() (*packp.AdvRefs, error) {
if s.advRefs != nil {
return s.advRefs, nil
}
ar := packp.NewAdvRefs()
if err := ar.Decode(s.Stdout); err != nil {
if err := s.handleAdvRefDecodeError(err); err != nil {
return nil, err
}
}
transport.FilterUnsupportedCapabilities(ar.Capabilities)
s.advRefs = ar
return ar, nil
}
func (s *session) handleAdvRefDecodeError(err error) error {
// If repository is not found, we get empty stdout and server writes an
// error to stderr.
if err == packp.ErrEmptyInput {
if err := s.checkNotFoundError(); err != nil {
return err
}
return io.ErrUnexpectedEOF
}
// For empty (but existing) repositories, we get empty advertised-references
// message. But valid. That is, it includes at least a flush.
if err == packp.ErrEmptyAdvRefs {
// Empty repositories are valid for git-receive-pack.
if s.isReceivePack {
return nil
}
if err := s.finish(); err != nil {
return err
}
return transport.ErrEmptyRemoteRepository
}
// Some server sends the errors as normal content (git protocol), so when
// we try to decode it fails, we need to check the content of it, to detect
// not found errors
if uerr, ok := err.(*packp.ErrUnexpectedData); ok {
if isRepoNotFoundError(string(uerr.Data)) {
return transport.ErrRepositoryNotFound
}
}
return err
}
// UploadPack performs a request to the server to fetch a packfile. A reader is
// returned with the packfile content. The reader must be closed after reading.
func (s *session) UploadPack(req *packp.UploadPackRequest) (*packp.UploadPackResponse, error) {
if req.IsEmpty() {
return nil, transport.ErrEmptyUploadPackRequest
}
if err := req.Validate(); err != nil {
return nil, err
}
if _, err := s.AdvertisedReferences(); err != nil {
return nil, err
}
s.packRun = true
if err := uploadPack(s.Stdin, s.Stdout, req); err != nil {
return nil, err
}
r, err := ioutil.NonEmptyReader(s.Stdout)
if err == ioutil.ErrEmptyReader {
if c, ok := s.Stdout.(io.Closer); ok {
_ = c.Close()
}
return nil, transport.ErrEmptyUploadPackRequest
}
if err != nil {
return nil, err
}
wc := &waitCloser{s.Command}
rc := ioutil.NewReadCloser(r, wc)
return DecodeUploadPackResponse(rc, req)
}
func (s *session) ReceivePack(req *packp.ReferenceUpdateRequest) (*packp.ReportStatus, error) {
if _, err := s.AdvertisedReferences(); err != nil {
return nil, err
}
s.packRun = true
if err := req.Encode(s.Stdin); err != nil {
return nil, err
}
if !req.Capabilities.Supports(capability.ReportStatus) {
// If we have neither report-status or sideband, we can only
// check return value error.
return nil, s.Command.Wait()
}
report := packp.NewReportStatus()
if err := report.Decode(s.Stdout); err != nil {
return nil, err
}
if err := report.Error(); err != nil {
return report, err
}
return report, s.Command.Wait()
}
func (s *session) finish() error {
if s.finished {
return nil
}
s.finished = true
// If we did not run a upload/receive-pack, we close the connection
// gracefully by sending a flush packet to the server. If the server
// operates correctly, it will exit with status 0.
if !s.packRun {
_, err := s.Stdin.Write(pktline.FlushPkt)
return err
}
return nil
}
func (s *session) Close() error {
if err := s.finish(); err != nil {
_ = s.Command.Close()
return nil
}
return s.Command.Close()
}
func (s *session) checkNotFoundError() error {
t := time.NewTicker(time.Second * readErrorSecondsTimeout)
defer t.Stop()
select {
case <-t.C:
return ErrTimeoutExceeded
case line, ok := <-s.errLines:
if !ok {
return nil
}
if isRepoNotFoundError(line) {
return transport.ErrRepositoryNotFound
}
return fmt.Errorf("unknown error: %s", line)
}
}
var (
githubRepoNotFoundErr = "ERROR: Repository not found."
bitbucketRepoNotFoundErr = "conq: repository does not exist."
localRepoNotFoundErr = "does not appear to be a git repository"
gitProtocolNotFoundErr = "ERR \n Repository not found."
)
func isRepoNotFoundError(s string) bool {
if strings.HasPrefix(s, githubRepoNotFoundErr) {
return true
}
if strings.HasPrefix(s, bitbucketRepoNotFoundErr) {
return true
}
if strings.HasSuffix(s, localRepoNotFoundErr) {
return true
}
if strings.HasPrefix(s, gitProtocolNotFoundErr) {
return true
}
return false
}
var (
nak = []byte("NAK")
eol = []byte("\n")
)
// uploadPack implements the git-upload-pack protocol.
//
// TODO support multi_ack mode
// TODO support multi_ack_detailed mode
// TODO support acks for common objects
// TODO build a proper state machine for all these processing options
func uploadPack(w io.WriteCloser, r io.Reader, req *packp.UploadPackRequest) error {
if err := req.UploadRequest.Encode(w); err != nil {
return fmt.Errorf("sending upload-req message: %s", err)
}
if err := req.UploadHaves.Encode(w, true); err != nil {
return fmt.Errorf("sending haves message: %s", err)
}
if err := sendDone(w); err != nil {
return fmt.Errorf("sending done message: %s", err)
}
if err := w.Close(); err != nil {
return fmt.Errorf("closing input: %s", err)
}
return nil
}
func sendDone(w io.Writer) error {
e := pktline.NewEncoder(w)
return e.Encodef("done\n")
}
// DecodeUploadPackResponse decodes r into a new packp.UploadPackResponse
func DecodeUploadPackResponse(r io.ReadCloser, req *packp.UploadPackRequest) (
*packp.UploadPackResponse, error,
) {
res := packp.NewUploadPackResponse(req)
if err := res.Decode(r); err != nil {
return nil, fmt.Errorf("error decoding upload-pack response: %s", err)
}
return res, nil
}
type waitCloser struct {
Command Command
}
// Close waits until the command exits and returns error, if any.
func (c *waitCloser) Close() error {
return c.Command.Wait()
}
