diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Makefile | 177 | ||||
| -rw-r--r-- | docs/_static/.gitignore | 1 | ||||
| -rw-r--r-- | docs/authors.rst | 2 | ||||
| -rw-r--r-- | docs/changes.rst | 2 | ||||
| -rw-r--r-- | docs/conf.py | 249 | ||||
| -rw-r--r-- | docs/index.rst | 45 | ||||
| -rw-r--r-- | docs/license.rst | 7 |
7 files changed, 483 insertions, 0 deletions
diff --git a/docs/Makefile b/docs/Makefile new file mode 100644 index 0000000..eb0e9c2 --- /dev/null +++ b/docs/Makefile @@ -0,0 +1,177 @@ +# Makefile for Sphinx documentation +# + +# You can set these variables from the command line. +SPHINXOPTS = +SPHINXBUILD = sphinx-build +PAPER = +BUILDDIR = _build + +# User-friendly check for sphinx-build +ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $?), 1) +$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/) +endif + +# Internal variables. +PAPEROPT_a4 = -D latex_paper_size=a4 +PAPEROPT_letter = -D latex_paper_size=letter +ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . +# the i18n builder cannot share the environment and doctrees with the others +I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . + +.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext + +help: + @echo "Please use \`make <target>' where <target> is one of" + @echo " html to make standalone HTML files" + @echo " dirhtml to make HTML files named index.html in directories" + @echo " singlehtml to make a single large HTML file" + @echo " pickle to make pickle files" + @echo " json to make JSON files" + @echo " htmlhelp to make HTML files and a HTML help project" + @echo " qthelp to make HTML files and a qthelp project" + @echo " devhelp to make HTML files and a Devhelp project" + @echo " epub to make an epub" + @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter" + @echo " latexpdf to make LaTeX files and run them through pdflatex" + @echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx" + @echo " text to make text files" + @echo " man to make manual pages" + @echo " texinfo to make Texinfo files" + @echo " info to make Texinfo files and run them through makeinfo" + @echo " gettext to make PO message catalogs" + @echo " changes to make an overview of all changed/added/deprecated items" + @echo " xml to make Docutils-native XML files" + @echo " pseudoxml to make pseudoxml-XML files for display purposes" + @echo " linkcheck to check all external links for integrity" + @echo " doctest to run all doctests embedded in the documentation (if enabled)" + +clean: + rm -rf $(BUILDDIR)/* + +html: + $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/html." + +dirhtml: + $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml." + +singlehtml: + $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml + @echo + @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml." + +pickle: + $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle + @echo + @echo "Build finished; now you can process the pickle files." + +json: + $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json + @echo + @echo "Build finished; now you can process the JSON files." + +htmlhelp: + $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp + @echo + @echo "Build finished; now you can run HTML Help Workshop with the" \ + ".hhp project file in $(BUILDDIR)/htmlhelp." + +qthelp: + $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp + @echo + @echo "Build finished; now you can run "qcollectiongenerator" with the" \ + ".qhcp project file in $(BUILDDIR)/qthelp, like this:" + @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/git-deps.qhcp" + @echo "To view the help file:" + @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/git-deps.qhc" + +devhelp: + $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp + @echo + @echo "Build finished." + @echo "To view the help file:" + @echo "# mkdir -p $HOME/.local/share/devhelp/git-deps" + @echo "# ln -s $(BUILDDIR)/devhelp $HOME/.local/share/devhelp/git-deps" + @echo "# devhelp" + +epub: + $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub + @echo + @echo "Build finished. The epub file is in $(BUILDDIR)/epub." + +latex: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo + @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex." + @echo "Run \`make' in that directory to run these through (pdf)latex" \ + "(use \`make latexpdf' here to do that automatically)." + +latexpdf: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through pdflatex..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +latexpdfja: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through platex and dvipdfmx..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +text: + $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text + @echo + @echo "Build finished. The text files are in $(BUILDDIR)/text." + +man: + $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man + @echo + @echo "Build finished. The manual pages are in $(BUILDDIR)/man." + +texinfo: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo + @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo." + @echo "Run \`make' in that directory to run these through makeinfo" \ + "(use \`make info' here to do that automatically)." + +info: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo "Running Texinfo files through makeinfo..." + make -C $(BUILDDIR)/texinfo info + @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo." + +gettext: + $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale + @echo + @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale." + +changes: + $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes + @echo + @echo "The overview file is in $(BUILDDIR)/changes." + +linkcheck: + $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck + @echo + @echo "Link check complete; look for any errors in the above output " \ + "or in $(BUILDDIR)/linkcheck/output.txt." + +doctest: + $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest + @echo "Testing of doctests in the sources finished, look at the " \ + "results in $(BUILDDIR)/doctest/output.txt." + +xml: + $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml + @echo + @echo "Build finished. The XML files are in $(BUILDDIR)/xml." + +pseudoxml: + $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml + @echo + @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml." diff --git a/docs/_static/.gitignore b/docs/_static/.gitignore new file mode 100644 index 0000000..3c96363 --- /dev/null +++ b/docs/_static/.gitignore @@ -0,0 +1 @@ +# Empty directory diff --git a/docs/authors.rst b/docs/authors.rst new file mode 100644 index 0000000..cd8e091 --- /dev/null +++ b/docs/authors.rst @@ -0,0 +1,2 @@ +.. _authors: +.. include:: ../AUTHORS.rst diff --git a/docs/changes.rst b/docs/changes.rst new file mode 100644 index 0000000..257630a --- /dev/null +++ b/docs/changes.rst @@ -0,0 +1,2 @@ +.. _changes: +.. include:: ../CHANGES.rst diff --git a/docs/conf.py b/docs/conf.py new file mode 100644 index 0000000..51f2a4a --- /dev/null +++ b/docs/conf.py @@ -0,0 +1,249 @@ +# -*- coding: utf-8 -*- +# +# This file is execfile()d with the current directory set to its containing dir. +# +# Note that not all possible configuration values are present in this +# autogenerated file. +# +# All configuration values have a default; values that are commented out +# serve to show the default. + +import sys + +# If extensions (or modules to document with autodoc) are in another directory, +# add these directories to sys.path here. If the directory is relative to the +# documentation root, use os.path.abspath to make it absolute, like shown here. +# sys.path.insert(0, os.path.abspath('.')) + +# -- Hack for ReadTheDocs ------------------------------------------------------ +# This hack is necessary since RTD does not issue `sphinx-apidoc` before running +# `sphinx-build -b html . _build/html`. See Issue: +# https://github.com/rtfd/readthedocs.org/issues/1139 +# DON'T FORGET: Check the box "Install your project inside a virtualenv using +# setup.py install" in the RTD Advanced Settings. +import os +on_rtd = os.environ.get('READTHEDOCS', None) == 'True' +if on_rtd: + import inspect + from sphinx import apidoc + + __location__ = os.path.join(os.getcwd(), os.path.dirname( + inspect.getfile(inspect.currentframe()))) + + output_dir = os.path.join(__location__, "../docs/api") + module_dir = os.path.join(__location__, "../git_deps") + cmd_line_template = "sphinx-apidoc -f -o {outputdir} {moduledir}" + cmd_line = cmd_line_template.format(outputdir=output_dir, moduledir=module_dir) + apidoc.main(cmd_line.split(" ")) + +# -- General configuration ----------------------------------------------------- + +# If your documentation needs a minimal Sphinx version, state it here. +# needs_sphinx = '1.0' + +# Add any Sphinx extension module names here, as strings. They can be extensions +# coming with Sphinx (named 'sphinx.ext.*') or your custom ones. +extensions = ['sphinx.ext.autodoc', 'sphinx.ext.intersphinx', 'sphinx.ext.todo', + 'sphinx.ext.autosummary', 'sphinx.ext.viewcode', 'sphinx.ext.coverage', + 'sphinx.ext.doctest', 'sphinx.ext.ifconfig', 'sphinx.ext.pngmath', + 'sphinx.ext.napoleon'] + +# Add any paths that contain templates here, relative to this directory. +templates_path = ['_templates'] + +# The suffix of source filenames. +source_suffix = '.rst' + +# The encoding of source files. +# source_encoding = 'utf-8-sig' + +# The master toctree document. +master_doc = 'index' + +# General information about the project. +project = u'git-deps' +copyright = u'2016, Adam Spiers' + +# The version info for the project you're documenting, acts as replacement for +# |version| and |release|, also used in various other places throughout the +# built documents. +# +# The short X.Y version. +version = '' # Is set by calling `setup.py docs` +# The full version, including alpha/beta/rc tags. +release = '' # Is set by calling `setup.py docs` + +# The language for content autogenerated by Sphinx. Refer to documentation +# for a list of supported languages. +# language = None + +# There are two options for replacing |today|: either, you set today to some +# non-false value, then it is used: +# today = '' +# Else, today_fmt is used as the format for a strftime call. +# today_fmt = '%B %d, %Y' + +# List of patterns, relative to source directory, that match files and +# directories to ignore when looking for source files. +exclude_patterns = ['_build'] + +# The reST default role (used for this markup: `text`) to use for all documents. +# default_role = None + +# If true, '()' will be appended to :func: etc. cross-reference text. +# add_function_parentheses = True + +# If true, the current module name will be prepended to all description +# unit titles (such as .. function::). +# add_module_names = True + +# If true, sectionauthor and moduleauthor directives will be shown in the +# output. They are ignored by default. +# show_authors = False + +# The name of the Pygments (syntax highlighting) style to use. +pygments_style = 'sphinx' + +# A list of ignored prefixes for module index sorting. +# modindex_common_prefix = [] + +# If true, keep warnings as "system message" paragraphs in the built documents. +# keep_warnings = False + + +# -- Options for HTML output --------------------------------------------------- + +# The theme to use for HTML and HTML Help pages. See the documentation for +# a list of builtin themes. +html_theme = 'alabaster' + +# Theme options are theme-specific and customize the look and feel of a theme +# further. For a list of options available for each theme, see the +# documentation. +# html_theme_options = {} + +# Add any paths that contain custom themes here, relative to this directory. +# html_theme_path = [] + +# The name for this set of Sphinx documents. If None, it defaults to +# "<project> v<release> documentation". +try: + from git_deps import __version__ as version +except ImportError: + pass +else: + release = version + +# A shorter title for the navigation bar. Default is the same as html_title. +# html_short_title = None + +# The name of an image file (relative to this directory) to place at the top +# of the sidebar. +# html_logo = "" + +# The name of an image file (within the static path) to use as favicon of the +# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 +# pixels large. +# html_favicon = None + +# Add any paths that contain custom static files (such as style sheets) here, +# relative to this directory. They are copied after the builtin static files, +# so a file named "default.css" will overwrite the builtin "default.css". +html_static_path = ['_static'] + +# If not '', a 'Last updated on:' timestamp is inserted at every page bottom, +# using the given strftime format. +# html_last_updated_fmt = '%b %d, %Y' + +# If true, SmartyPants will be used to convert quotes and dashes to +# typographically correct entities. +# html_use_smartypants = True + +# Custom sidebar templates, maps document names to template names. +# html_sidebars = {} + +# Additional templates that should be rendered to pages, maps page names to +# template names. +# html_additional_pages = {} + +# If false, no module index is generated. +# html_domain_indices = True + +# If false, no index is generated. +# html_use_index = True + +# If true, the index is split into individual pages for each letter. +# html_split_index = False + +# If true, links to the reST sources are added to the pages. +# html_show_sourcelink = True + +# If true, "Created using Sphinx" is shown in the HTML footer. Default is True. +# html_show_sphinx = True + +# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. +# html_show_copyright = True + +# If true, an OpenSearch description file will be output, and all pages will +# contain a <link> tag referring to it. The value of this option must be the +# base URL from which the finished HTML is served. +# html_use_opensearch = '' + +# This is the file name suffix for HTML files (e.g. ".xhtml"). +# html_file_suffix = None + +# Output file base name for HTML help builder. +htmlhelp_basename = 'git_deps-doc' + + +# -- Options for LaTeX output -------------------------------------------------- + +latex_elements = { +# The paper size ('letterpaper' or 'a4paper'). +# 'papersize': 'letterpaper', + +# The font size ('10pt', '11pt' or '12pt'). +# 'pointsize': '10pt', + +# Additional stuff for the LaTeX preamble. +# 'preamble': '', +} + +# Grouping the document tree into LaTeX files. List of tuples +# (source start file, target name, title, author, documentclass [howto/manual]). +latex_documents = [ + ('index', 'user_guide.tex', u'git-deps Documentation', + u'Adam Spiers', 'manual'), +] + +# The name of an image file (relative to this directory) to place at the top of +# the title page. +# latex_logo = "" + +# For "manual" documents, if this is true, then toplevel headings are parts, +# not chapters. +# latex_use_parts = False + +# If true, show page references after internal links. +# latex_show_pagerefs = False + +# If true, show URL addresses after external links. +# latex_show_urls = False + +# Documents to append as an appendix to all manuals. +# latex_appendices = [] + +# If false, no module index is generated. +# latex_domain_indices = True + +# -- External mapping ------------------------------------------------------------ +python_version = '.'.join(map(str, sys.version_info[0:2])) +intersphinx_mapping = { + 'sphinx': ('http://sphinx.pocoo.org', None), + 'python': ('http://docs.python.org/' + python_version, None), + 'matplotlib': ('http://matplotlib.sourceforge.net', None), + 'numpy': ('http://docs.scipy.org/doc/numpy', None), + 'sklearn': ('http://scikit-learn.org/stable', None), + 'pandas': ('http://pandas.pydata.org/pandas-docs/stable', None), + 'scipy': ('http://docs.scipy.org/doc/scipy/reference/', None), +} diff --git a/docs/index.rst b/docs/index.rst new file mode 100644 index 0000000..be83b1b --- /dev/null +++ b/docs/index.rst @@ -0,0 +1,45 @@ +======== +git-deps +======== + +This is the documentation of **git-deps**. + +.. note:: + + This is the main page of your project's `Sphinx <http://sphinx-doc.org/>`_ + documentation. It is formatted in `reStructuredText + <http://sphinx-doc.org/rest.html>`__. Add additional pages by creating + rst-files in ``docs`` and adding them to the `toctree + <http://sphinx-doc.org/markup/toctree.html>`_ below. Use then + `references <http://sphinx-doc.org/markup/inline.html>`__ in order to link + them from this page, e.g. :ref:`authors <authors>` and :ref:`changes`. + It is also possible to refer to the documentation of other Python packages + with the `Python domain syntax + <http://sphinx-doc.org/domains.html#the-python-domain>`__. By default you + can reference the documentation of `Sphinx <http://sphinx.pocoo.org>`__, + `Python <http://docs.python.org/>`__, `matplotlib + <http://matplotlib.sourceforge.net>`__, `NumPy + <http://docs.scipy.org/doc/numpy>`__, `Scikit-Learn + <http://scikit-learn.org/stable>`__, `Pandas + <http://pandas.pydata.org/pandas-docs/stable>`__, `SciPy + <http://docs.scipy.org/doc/scipy/reference/>`__. You can add more by + extending the ``intersphinx_mapping`` in your Sphinx's ``conf.py``. + +Contents +======== + +.. toctree:: + :maxdepth: 2 + + License <license> + Authors <authors> + Changelog <changes> + Module Reference <api/modules> + + +Indices and tables +================== + +* :ref:`genindex` +* :ref:`modindex` +* :ref:`search` diff --git a/docs/license.rst b/docs/license.rst new file mode 100644 index 0000000..6437528 --- /dev/null +++ b/docs/license.rst @@ -0,0 +1,7 @@ +.. _license: + +======= +License +======= + +.. literalinclude:: ../LICENSE.txt |